Leaderboard


Popular Content

Showing content with the highest reputation on 08/08/2019 in all areas

  1. 1 point
    I finally made the jump for the update from 6.2.1-23824 Update 6 to 6.2.2-24922 Update 2, i only use a custom extra.lzma without i915 drivers, and everything work nicely, onboard Lan, HW transcode, i even made some test with geekbench to find out if the cpu burst work and its a big YES ! With the turbo states OFF in bios > https://browser.geekbench.com/v4/cpu/14202331 With the turbo states ON in bios > https://browser.geekbench.com/v4/cpu/14202575 *I made 2 bench of both turbo state to be sure. For the custom extra you can find it with instruction in this topic >
  2. 1 point
    На 8.2.2 все оки доки.
  3. 1 point
    From this thread, It's made by real3x. It has the i915.ko and the drm*.ko's removed. I too have a j3455 so I wanted to play with it. extra.lzma
  4. 1 point
    You just see the "duplicate" extra when you unpack the extra.lzma ( cpio -idv < extra ) You' re right for the firmware, i'll test to remove then and see what's loaded. Nice ! but i did not make a lot, i just removed a driver
  5. 1 point
  6. 1 point
    Just correct cpu information view It does not affect performance or anything.
  7. 1 point
    My guess is that the maximum thread represented in DSM is 8. I have not had a system with more than 8 threads, so I have not checked, can you show me the full results of your system cat /proc/cpuinfo ?
  8. 1 point
    Today Update!! Download Available Right Now !!!
  9. 1 point
    Dear Xpenology forum members, I'm come back!!!! I have been very busy at work. So I could not cope with the changed code because I could not upgrade DSM. But! I have recently successfully migrationed the "ivybridge" of existing my systems to "haswell". I also added an additional LAN card. The latest version of "DSM 6.2.2-24922 Update 2" is now available for the DS3615xs, 918+ and other versions. I'll be updating and distributing the "ch_cpuinfo" tool soon so that it will work with the latest version. I'm sorry to have kept you waiting so long, and thank you for waiting. See you soon. Dear @Polanskiman , Thank you for your patience and care for the topic I could not manage. I'll update soon. Dear @gericb , Thank you for your concern and supportive mentality
  10. 1 point
    In addition to bricked boxes due to inattentive upgrades, there seems to be a surge of questions regarding how to select a DSM platform, version and loader. This table should help navigate the options and current state of the loaders. While situations rapidly change, it should be correct as of the listed date. 6.x Loaders and Platforms as of 07/Apr/2019 Loader DSM Platform DSM Version Kernel DSM /dev/dri DSM NVMe cache Boot method CPU Needed Notes 1.04b DS918 6.2 to 6.2.2 4.4.x Supported Supported EFI or Legacy BIOS Haswell or later recommended, AsRock Jxxxx fails on 6.2.2 1.03b DS3615 or DS3617 6.2 to 6.2.2 3.10.x Not Supported Not Supported Legacy BIOS only Nehalem or later 6.2.1+ seems to require Intel e1000e NIC 1.02b DS916 6.0.3 to 6.1.7 3.10.x Supported Not Supported EFI or Legacy BIOS (Jun) MBR (Genesys) Nehalem or later 1.02b DS3615 6.0.3 to 6.1.7 3.10.x Not Supported Not Supported EFI or Legacy BIOS (Jun) MBR (Genesys) Nehalem or later recommended 1.02b DS3617 6.0.3 to 6.1.6 3.10.x Not Supported Not Supported EFI or Legacy BIOS (Jun) MBR (Genesys) Nehalem or later 6.1.7 on ESXi failures reported 1.01 DS916 or DS3615 or DS3617 6.0 to 6.0.2 3.10.x Not Supported Not Supported EFI or Legacy BIOS (Jun) MBR (Genesys) Nehalem or later obsolete
  11. 1 point
    Try my extra : (no need to disable anything in bios) Change of this extra.lzma > - removed drivers i915.ko drm_kms_helper.ko drm.ko in usr/lib/modules - removed reference of this drivers in etc/rc.modules Installation > sudo -i echo 1 > /proc/sys/kernel/syno_install_flag mkdir -p /mnt/synoboot1 mkdir -p /mnt/synoboot2 mount /dev/synoboot1 /mnt/synoboot1 mount /dev/synoboot2 /mnt/synoboot2 Remove extra2.lzma and replace extra.lzma by the one attach at this is post in /mnt/synoboot2 Important > clean /usr/lib/modules/update/* - Be careful with the rm ! rm -rf /usr/lib/modules/update/* And reboot. you might not have KP on i915 but you''ll probably lost your LAN, since this motherboard only have an old PCI port, i have no clue about a LAN card in PCI that might work. Alternatively you can use a dongle USB3 > LAN, a one with a ax88179 chips like this one > https://www.amazon.fr/gp/product/B00MYTSN18/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 This chipset work natively with the DSM driver : [ 240.104583] ax88179_178a 2-3:1.0 eth1: register 'ax88179_178a' at usb-0000:00:15.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:0e:c6:bd:d5:13 [ 240.118675] usbcore: registered new interface driver ax88179_178a extra.lzma