Jump to content
XPEnology Community

Leaderboard

Popular Content

Showing content with the highest reputation on 10/10/2018 in all areas

  1. This version is alpha, as the loader 1.03a2 is, so DO NOT use this on a "production" systems and be prepared to loose the data you have on the "test-system" (I recommend you have a very recent backup) !!!all sata_* and pata_* drivers are still not working because of the kernel source changes Synology did (same as in kernel 3.10.102 used and modded by Synology), as long as no one writes a patch for this I can use to fix this, it will stay this way !!! HP SmartArray Controller driver (hpsa.ko) is back in for testing (for now the one that comes with kernel 4.4.59), my P400 i had access to was to old for this driver so please try to test, newer controller even seem to have a IT mode so if present try it with this mode To check if the hardware is supported with a driver, use a running DSM installation or boot a live Ubuntu from usb. In console type the following: lspci -k | grep 'Kernel driver' That command will list the used kernel modules for the hardware. Modules for network and storage will be listed. Compare that with the list of modules that comes with the extra.lzma ramdisks provided below. extra.lzma for DS918+ v0.2 (still online for testing against new 0.4) http://www.filedropper.com/extra918plusv02 SHA256: 793B844F2649B81D9B3096CD458E169DB254989FC8B2519341FA464D517D00C2 Mirrors by @rcached https://dailyuploads.net/frna1z7ba8bo https://usersdrive.com/t71xwwy74un9.html https://www23.zippyshare.com/v/NSpdJ5Xc/file.html extra.lzma for DS918+ v0.3 http://www.filedropper.com/extra918plusv03 SHA256: 452ACB232607E15CFC5D88EFBF03800EA034383FC0584A2CDB2180CEA49C0660 Mirrors by @rcached https://dailyuploads.net/63jy78stbfq1 https://usersdrive.com/3svgjiyx13im.html https://www78.zippyshare.com/v/7ZYKeVbl/file.html extra.lzma for DS918+ v0.4 http://www.filedropper.com/extra918plusv04 SHA256: D7C5150BA0EF1653B3F3B688793B10E7503589E75CBA0E1D6D054388C14606DE Mirrors by @rcached https://dailyuploads.net/ud7lq6m2bto9 https://usersdrive.com/l34neyil9xcf.html https://www74.zippyshare.com/v/45PDyF86/file.html extra.lzma for DS918+ v0.5_test http://www.filedropper.com/extra918plusv05test SHA256: 765095FC170CB1A23371E6BD7A593F9FD8CA3E0B2D86445C25DA72420FCBBF04 Mirrors by @rcached https://dailyuploads.net/i1ctdis7m3hf https://usersdrive.com/4dfe3ks2tk9y.html https://www2.zippyshare.com/v/8xkz80dK/file.html SHA256: 765095FC170CB1A23371E6BD7A593F9FD8CA3E0B2D86445C25DA72420FCBBF04 Note: the driver list below with related hardware is based on Trantor/Quicknick's older list for 5.2 and 6.0 so thanks goes to them and all others who helped to build the older list for 5.2 and 6.0. Caption (…) Not compiled for now, ask for it […] Either confirmed by users that it is not working OR not supported for DSM 6.2 (kernel 4.4.59) OR does not load at all. Driver was compiled/tested but removed - if someone finds a way to get it working in some way, tell us here and it will be added  If you wish to make a driver request do so in the topic linked below: If you wish to discuss problems about modules in these ramdisks then drop a post below. Please be specific and provide relevant information such as: ramdisk version, loader model, motherboard and any additional storage/networks cards present in the system. Other things good to know about DS918+ image and loader 1.03a2: 1. DS918+ image comes with a limit for 2 internal network ports in synoinfo.conf (the original hardware has two ports and does not have a pcie slot for extending) jun's loader does not changes this (now?), so if you plan to user more then 2 ports you will have to manually change the synoinfo.conf (3615 and 3617 are bigger business models and have options for additional network card, the default from synology is 8 on this systems) further information can be read here: 2. hardware transcoding seems to crash the system when a monitor is attached, unplug monitor, reboot try again to see if there is decoding hardware present you can try this (there should be something in like card0) ls -al /dev/dri/ when using plex you should download the 64bit version from website, with plex pass active (hardware-accelerated streaming is a premium feature and requires an payed active Plex Pass subscription), Settings > Server > Transcoder, Turn on Show Advanced, Turn on Use hardware acceleration when available 3. if your screen goes blank during boot and the system does not show up in network the kernel might have crashed on boot while loading i915.ko driver (CPU internal GPU) look in your bios for a legacy mode option, disable it and try again (boot process and crash can be seen when using a "good old" serial cable and a console program like putty on a 2nd computer - that's rarely done but if you want to know for sure, that's your way to find out, DSM does not have a typical boot screen that shows log info and login prompt after boot, that's redirected to the serial port)
    1 point
  2. A little help for everyone who struggles a little bit with enabling the serial console in ESXi. This manual works 1:1: https://www.juniper.net/documentation/en_US/vmx15.1f4/topics/task/configuration/vmx-vm-connecting-vmware.html in short: # at ESXi: open Firewall for serial Console # at VM: add Serial Port 1 - Use Network - Connect at Power - Direction: Server - Port URI: telnet://:8601 In PuTTY the connection will be made as: Type: Telnet Hostname: IP-of-your-ESXi-Host Port: The-port-you-entered-in-the-config-of-the-VM (e.g. 8601) With this you have at every time contact to the Xpenology-VM-Console even a driver wont be load with a upgrade (like in Loader 1.02a).
    1 point
  3. Today I've tried to upgrade my HP N40L Microserver but the onboard nic won't work anymore. I want to rollback to DSM 6.2-23739 Update 2. I've tried the following; Flashed my USB with the latest bootloader 1.03b and starter the NAS. The NAS is reachable but only has the recovery option, but after the recovery the nic isn't reachable again. How can I force the install to use DSM 6.2.1-23824, and hopefully without any data loss only config loss.
    1 point
  4. Почитал, разобрался, осознал.
    1 point
  5. (use the opposite of what you have installed currently) so if you have loader for 3617 then use files from 3615 and if loader is 3615 then use files from 3617
    1 point
  6. But I don't understand that one for now, I need to use the zImage, extra.gz and rd.gz from another image but which one? How to downgrade: Replace zImage, extra.gz and rd.gz (open synology.img -> image.img with 7Zip) with the one from DS3615xs (use the opposite of what you have installed currently) so you will force a reinstall of DSM. You cannot migrate the settings, so you have to do a clean install (keeps your data). Afterwards replace the above files again with your original bootloader, for me its DS3617xs and do a fresh install again.
    1 point
  7. в принципе разумное и взвешенное решение, тем более в шапке форума тоже не советуют торопится(держателей 3615) *впрочем 3615 в списке v6.2.1-23824 тоже нет! незнаю что там поланский мутит... хотя для ручного обновления эти версии есть в списке для скачивания: https://archive.synology.com/download/DSM/release/6.2.1/23824/ у меня 918 загрузчик и после 6.2-23739-2 пока обнов не прилетает Аппаратное декодирование работает и это не основная фича для сервера nas а точнее бесполезная (имхо) что nas что san который можно построить из dsm-nas - это прежде всего СХД c вытекающими фичами для виртуализации и здесь поэтому ещё раз повторю что просто сравните дсм 6.1 и дсм 6.2 в плане vmm и iSCSI кто пользует эти фичи и не только, тот поймёт какие преимущества несёт 6.2
    1 point
×
×
  • Create New...