gcat Posted August 8, 2022 Share #1 Posted August 8, 2022 i have a problem. redpill tinycore 0.8.0.0, builds OK 3622xs+ 7.1-42661 after installing the system - reboot and ... again it is proposed to install the system. and so on in a circle. motherboard supermicro a1sri-2758f, disks are detected correctly, ext is installed on network cards, after assembling the bootloader, I do rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now what's wrong? why is the system "installed", but after a reboot it seems not to be installed and I see the welcome screen again with a suggestion to install the system Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 8, 2022 Share #2 Posted August 8, 2022 Try building the loader again without the "rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now" command Use this tutorial: Quote Link to comment Share on other sites More sharing options...
kk xu Posted August 24, 2022 Share #3 Posted August 24, 2022 I have the same issue even I didn't do rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 24, 2022 Share #4 Posted August 24, 2022 1 hour ago, kk xu said: I have the same issue even I didn't do rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module Do you have the same hardware as @gcat? I not.. can you list the hardware you are using? Can you post the output of your build? This will help diagnose your issue. Quote Link to comment Share on other sites More sharing options...
kk xu Posted August 24, 2022 Share #5 Posted August 24, 2022 not same hadwares CPU intel 8500k motherboard asrock z390m-pro4 ethernet: broadcom 2x1gbe ethernet card 1 aqc107 card (msi superklan 10g) (new add) 1 211-v come with motherboard 4X5tb install in motherboard sata ports 2X3TB installed in jmb585 sata pcie card 2x 512GB with nvme SSD recentlly i have update it from DSM6.2 and upgrade it to DS3622xs+7.1.0-42661 successfully. in the DSM control plane I could see the version is DS3622xs+7.1.0-42661-update1 yesterday I bought a 10gbe card (aqc107)and install it in the free pcie lane in my motherboard. but not recegnized in the DSM. So I plan to have a refesh install with it , before I have a fresh isntallation. I removed all the HDD disks but Nvme SSD. add a new disk connect to the port1 SATA and I build the DS3622xs+7.1.0-42661 again with a new USB stick. I didn't find anythig wrong when I build. after the building., I reboot it and I could find a new SynologyNAS in the synology Assistant with the status "Not install" I disconnected the internet to make sure no any auto update when I'm doing install but the issue happen same with @gcat the issue: the status always be "not installed" after rebooting. the PAT file hash PS C:\Users\xukai\Downloads> certutil -hashfile '.\DSM_DS3622xs+_42661 (4).pat' sha256 SHA256 的 .\DSM_DS3622xs+_42661 (4).pat 哈希: 53d0a4f1667288b6e890c4fdc48422557ff26ea8a2caede0955c5f45b560cccd Thanks for your help. @rojoone2 build log Quote Link to comment Share on other sites More sharing options...
kk xu Posted August 24, 2022 Share #6 Posted August 24, 2022 I just have a try to remove the aqc107 ethernet card when build it works..... even no need to do a fresh install , after the rebooting when build. the NAS was up and status is "ready" something wrong about the ethernet card. Quote Link to comment Share on other sites More sharing options...
kk xu Posted August 24, 2022 Share #7 Posted August 24, 2022 But I can not access from the serial port http://DSM:7681 I don't know why and I want to do some investegation about the issue. who could help me about it? Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 24, 2022 Share #8 Posted August 24, 2022 I have not seen a driver for that card, but have you tried to rebuild with the card installed? DSM wont recognize without drivers. Quote Link to comment Share on other sites More sharing options...
kk xu Posted August 24, 2022 Share #9 Posted August 24, 2022 rebuild fialed again with the card installed also with a HDD driver installed Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 24, 2022 Share #10 Posted August 24, 2022 57 minutes ago, kk xu said: But I can not access from the serial port http://DSM:7681 I don't know why and I want to do some investegation about the issue. who could help me about it? Have you enabled SSH on the NAS? Control Panel>Terminal & SNMP> check "Enable SSH service" Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 24, 2022 Share #11 Posted August 24, 2022 2 minutes ago, kk xu said: rebuild fialed again with the card installed also with a HDD driver installed Yeah.. figured there was no driver for that card. Put in a driver request here: Quote Link to comment Share on other sites More sharing options...
kk xu Posted August 24, 2022 Share #12 Posted August 24, 2022 yes, I enable it when I can login it But during this refreshed install with status “not installed” I think I have no option to enbale it Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 24, 2022 Share #13 Posted August 24, 2022 Install the .pat file and choose "keep all settings and data" Quote Link to comment Share on other sites More sharing options...
kk xu Posted August 24, 2022 Share #14 Posted August 24, 2022 yes, thanks as per the status of post installation. always show not installed the root cause is driver missing, right? Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 24, 2022 Share #15 Posted August 24, 2022 You should have all your hard drives plugged in during the build and do a ./rploader.sh clean now before the rest of your commands. You should be getting a "Migratable" prompt instead of not installed. Quote Link to comment Share on other sites More sharing options...
kk xu Posted August 25, 2022 Share #16 Posted August 25, 2022 if I add some new hardware like ethernet card, what should I do? @rojoone2 1, record the mac and serial number, 2,rebuild with all hard drivers plugged in during building, 3,./rploader.sh clean before exitcheck reboot my problem is when I plugin in the ethernet card (suppose it's not supported by Synology, but I do the add extention when I build), the build is ok,but always"not installed" Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 25, 2022 Share #17 Posted August 25, 2022 You do not do the clean command after you build the loader. It should look like this: ./rploader.sh clean ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh serialgen DS3622xs+ realmac ./rploader.sh identifyusb ./rploader.sh satamap ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/mvsas/rpext-index.json ./rploader.sh backup now ./rploader.sh build broadwellnk-7.1.0-42661 exitcheck reboot After a closer look at your build log, I see that the driver extension for your 10g NIC was loaded but the SATA controller was not: Found Ethernet Interface : pciid 8086d000015bc Required Extension : e1000e Searching for matching extension for e1000e Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json" Found SATA Controller : pciid 197bd00000585 Required Extension : No matching extension [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/atlantic/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/atlantic/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [OK] [#] ========================================== pocopico.atlantic ========================================== [#] Extension name: atlantic [#] Description: Adds Marvell (Aquantia) Corporation(R) Network Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/atlantic [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/atlantic/rpext-index.json [#] Platforms supported: ds1621p_42218 ds1621p_42951 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds3617xs_42951 dva1622_42218 dva1622_42621 ds1621p_42661 dva1622_42951 ds918p_25556 dva3221_42218 ds3615xs_42661 dva3221_42951 ds3622xsp_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds920p_42951 ds2422p_42951 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds3615xs_42951 ds3622xsp_42951 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= Found Ethernet Interface : pciid 1d6ad000007b1 Required Extension : atlantic Searching for matching extension for atlantic Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/atlantic/rpext-index.json" [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/tg3/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [OK] Quote Link to comment Share on other sites More sharing options...
gcat Posted September 3, 2022 Author Share #18 Posted September 3, 2022 В 24.08.2022 в 16:07, rojoone2 сказал: Do you have the same hardware as @gcat? I not.. can you list the hardware you are using? Can you post the output of your build? This will help diagnose your issue. in the issue, i used an automatic redpill loader (arpl) and always migrated from 6.2.3 DS3615 to 7.1 3622 Quote Link to comment Share on other sites More sharing options...
Tone Posted September 4, 2022 Share #19 Posted September 4, 2022 (edited) Hello there, I'm experiencing the same issue, whenever I load and build the bootloader, I'm prompted with the installation wizard, select the pat file, reach 72%-73% and then reboot and prompted again with the installation wizard in an endless loop. I tried everything and when I mean by everything... EVERYTHING, tried every different builds, usbs, spare disks, changing sata mode from Legacy to UEFI and viceversa, removed any possible RAID configuration... My setup is an HP Proliant Microserver Gen10 AMD Opteron X3216 PD: Just to mention that I'm parting from a clean installation, neither migration nor recovery. Edited September 4, 2022 by Tone Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted September 5, 2022 Share #20 Posted September 5, 2022 19 hours ago, Tone said: Hello there, I'm experiencing the same issue, whenever I load and build the bootloader, I'm prompted with the installation wizard, select the pat file, reach 72%-73% and then reboot and prompted again with the installation wizard in an endless loop. I tried everything and when I mean by everything... EVERYTHING, tried every different builds, usbs, spare disks, changing sata mode from Legacy to UEFI and viceversa, removed any possible RAID configuration... My setup is an HP Proliant Microserver Gen10 AMD Opteron X3216 PD: Just to mention that I'm parting from a clean installation, neither migration nor recovery. Which platform are you trying to build? Quote Link to comment Share on other sites More sharing options...
Tone Posted September 5, 2022 Share #21 Posted September 5, 2022 4 hours ago, rojoone2 said: Which platform are you trying to build? bromolow-7.1.0-42661 (DS3615xs) Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted September 5, 2022 Share #22 Posted September 5, 2022 That platform is loosing support Give the DS3622xs+ a try or the DVA1621+(That uses an AMDCPU)? Quote Link to comment Share on other sites More sharing options...
Tone Posted September 6, 2022 Share #23 Posted September 6, 2022 9 hours ago, rojoone2 said: That platform is loosing support Give the DS3622xs+ a try or the DVA1621+(That uses an AMDCPU)? Which build is DVA11621+? The only one I see here is DS1621+ here which Indeed has support for AMD but Ryzen models... I don't know if that could have an impact no harm to try it. Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted September 6, 2022 Share #24 Posted September 6, 2022 That was my mistake. I was referring to the DS1621+. Quote Link to comment Share on other sites More sharing options...
Tone Posted September 6, 2022 Share #25 Posted September 6, 2022 1 hour ago, rojoone2 said: That was my mistake. I was referring to the DS1621+. No worries, after all I think it's not really the problem at all changing the build. I just followed a big variety of methods and all of them results in the same results: there's no problems building, serializing, setting de VID/PID of the usb and so on but something that really annoys me is when I execute satamap, it's not able apparently to find any drives although the DSM setup runs smoothly being able to detect the HDD, it's this normal? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.