Jump to content
XPEnology Community

dsm7.1 on asrock j5040


Recommended Posts

Hello,

 during the installation from DSM7.1 on an ASRock J5040 board with 16Gb Ram i get a loop . after 10Minutes  there was was a miskate and i must start again.

i use this manual ./my.sh DS918+

.

Link to comment
Share on other sites

In the specifications of this motherboard, the NIC chipset is RTL8111H, and R8169 ext seems to have been used.

While waiting for 10 minutes, first check the LED blinking status of the NIC port.

 

Please let me know if the green lamp is on and the orange lamp is blinking.

If the blinking status is not confirmed, there is a problem with nic ext itself.

 

If it is confirmed that the orange lamp blinks,

Quickly find IP assigned by find.synology.com or router
Please attach the log checked after connecting to ttyd as shown below using a spoiler.

 

http://<youripaddr>:7681/
id : root / pw : ( no password )

cat /var/log/*rc*

ls -l /sys/block

 

https://www.asrock.com/mb/Intel/J5040-ITX/index.asp#Specification

Link to comment
Share on other sites

7 minutes ago, Peter Suh said:

In the specifications of this motherboard, the NIC chipset is RTL8111H, and R8169 ext seems to have been used.

While waiting for 10 minutes, first check the LED blinking status of the NIC port.

 

Please let me know if the green lamp is on and the orange lamp is blinking.

If the blinking status is not confirmed, there is a problem with nic ext itself.

 

If it is confirmed that the orange lamp blinks,

Quickly find IP assigned by find.synology.com or router
Please attach the log checked after connecting to ttyd as shown below using a spoiler.

 

http://<youripaddr>:7681/
id : root / pw : ( no password )

cat /var/log/*rc*

ls -l /sys/block

 

https://www.asrock.com/mb/Intel/J5040-ITX/index.asp#Specification

DiskStation> cat /var/log/*rc*
START /linuxrc.syno.impl
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module xhci-pci ... [  OK  ]
:: Loading module usb-storage ... [  OK  ]
:: Loading kernel modules from extensions ...
Loading kmod #0 "igb.ko" for pocopico.igb (args: )
Loading kmod #0 "mii.ko" for pocopico.r8169 (args: )
Loading kmod #1 "r8169.ko" for pocopico.r8169 (args: )
:: Loading kernel modules from extensions ... [  OK  ]
:: Executing "on_boot" custom scripts ...
Running "check-igb.sh" for pocopico.igb->on_boot
Loading module igb -> Module igb loaded succesfully
Ran "check-igb.sh" for pocopico.igb->on_boot - exit=0
Running "check-r8169.sh" for pocopico.r8169->on_boot
Loading module r8169 -> Module r8169 loaded succesfully
Ran "check-r8169.sh" for pocopico.r8169->on_boot - exit=0
Running "boot-wait.sh" for redpill-boot-wait->on_boot
Still waiting for boot device (waited 1 of 30 seconds)
Still waiting for boot device (waited 2 of 30 seconds)
Confirmed a valid-looking /dev/synoboot device
Ran "boot-wait.sh" for redpill-boot-wait->on_boot - exit=0
Running "install_rd.sh" for redpill-misc->on_boot
Starting ttyd, listening on port: 7681
Ran "install_rd.sh" for redpill-misc->on_boot - exit=0
:: Executing "on_boot" custom scripts ... [  OK  ]
Extensions processed
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
Insert synorbd kernel module
Insert synofsbd kernel module
Insert sha256 kernel module
Assemble args: -u bc350d97:97d8e994:3017a5a8:c86610be /dev/sda1 /dev/sdb1 /dev/sdc1
mdadm: /dev/md0 has been started with 3 drives (out of 16).
Partition Version=8
 /sbin/e2fsck exists, checking /dev/md0... 
e2fsck 1.44.1 (24-Mar-2018)
[QUOTA WARNING] Usage inconsistent for ID 0:actual (1002917888, 55) != expected (1002913792, 54)
/sbin/e2fsck -yvf returns 1
Mounting /dev/md0 /tmpRoot
------------upgrade
Begin upgrade procedure
Found an upgrade file on data volume. Begin upgrade
Print space usage on RootMnt (/tmpRoot)
- Result of df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/md0               2385528    986704   1280040  44% /tmpRoot
- Result of du
4.0K    ./var
12.0K   ./etc
30.6M   ./.syno
54.4M   ./SynoUpgradePackages
8.0K    ./@autoupdate
800.0K  ./.log.junior
4.0K    ./lost+found
25.3M   ./.SynoUpgradeBootupSmallUpdateFiles
956.5M  .
4.0K    var
du: usr: No such file or directory
du: usr/local/packages/@appstore/: No such file or directory
Checksum of system tarball verified.
'/tmpRoot/etc/dhcpc' -> '/tmpRoot/.upd@te/etc/dhcpc'
'/tmpRoot/var/.NormalShutdown' -> '/tmpRoot/.upd@te/var/.NormalShutdown'
'/tmpRoot/var/.PrivacyConfirmed' -> '/tmpRoot/.upd@te/var/.PrivacyConfirmed'
Removing /tmpRoot/.upd@te//etc/VERSION...
Removing /tmpRoot/.upd@te//etc/ftpusers...
Removing /tmpRoot/.upd@te//etc/rc...
Removing /tmpRoot/.upd@te//etc/rc.network...
Removing /tmpRoot/.upd@te//usr/syno/etc/rc.atalk...
Removing /tmpRoot/.upd@te//usr/syno/etc/.htpasswd...
Removing /tmpRoot/.upd@te//usr/syno/etc/lpd/lpd.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/printcap...
Removing /tmpRoot/.upd@te//usr/syno/etc/ups.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/upsd.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/upsd.users...
Removing /tmpRoot/.upd@te//usr/syno/etc/upsmon.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/upssched.conf...
Removing /tmpRoot/.upd@te//etc/lvm/lvm.conf...
Removing /tmpRoot/.upd@te//usr/local/etc/rc.d/SynoEnablePersonalServices.sh...
Removing /tmpRoot/.upd@te//etc/rc.network_routing...
Removing /tmpRoot/.upd@te//usr/syno/etc/rc.tun...
Removing /tmpRoot/.upd@te//usr/syno/etc/afpd.conf...
Removing /tmpRoot/.upd@te//etc/pam.d/samba...
Removing /tmpRoot/.upd@te//etc/ppp/ip-up...
Removing /tmpRoot/.upd@te//etc/ppp/ip-down...
Removing /tmpRoot/.upd@te//etc/ppp/ip-function...
Removing /tmpRoot/.upd@te//etc/ppp/ipv6-up...
Removing /tmpRoot/.upd@te//etc/ppp/ipv6-down...
Removing /tmpRoot/.upd@te//etc/ppp/options...
Removing /tmpRoot/.upd@te//usr/local/cups/mime.types...
Removing /tmpRoot/.upd@te//usr/local/cups/mime.convs...
Removing /tmpRoot/.upd@te//etc/cups/cupsd.conf...
Removing /tmpRoot/.upd@te//usr/local/cups/cupsd.conf...
Removing /tmpRoot/.upd@te//usr/local/cups/testprint...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/bannertops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/commandtops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/gziptoany...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/imagetops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/imagetoraster...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/pdftops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/pstops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertoepson...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertohp...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertolabel...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertopwg...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/texttops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/hpgltops...
Removing /tmpRoot/.upd@te//etc/hostapd/stainfo.sh...
Removing /tmpRoot/.upd@te//etc/hostapd/mac_filter/mfscript.sh...
Removing /tmpRoot/.upd@te//usr/syno/etc/rfkill.sh...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_guest_net.sh...
Removing /tmpRoot/.upd@te//etc/ld.so.preload...
Removing /tmpRoot/.upd@te//etc/tc/default.cmd...
Removing /tmpRoot/.upd@te//usr/syno/etc/ssl/mkcert.sh...
Removing /tmpRoot/.upd@te//usr/syno/etc/ssl/mkcgikey.sh...
Removing /tmpRoot/.upd@te//etc/logrotate.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/usbmodem/wcdma_list.json...
Removing /tmpRoot/.upd@te//usr/syno/etc/usbmodem/usb_modeswitch.d/*...
Removing /tmpRoot/.upd@te//etc/php/php.ini...
Removing /tmpRoot/.upd@te//etc/php/php-fpm.conf...
Removing /tmpRoot/.upd@te//etc/php/conf.d/opcache.ini...
Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d/global.setting...
Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d/system.cfg...
Removing /tmpRoot/.upd@te//usr/syno/etc/ssdp/dsm_desc.xml...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_time_ctrl.sh...
Removing /tmpRoot/.upd@te//etc/profile...
Removing /tmpRoot/.upd@te//etc/inputrc...
Removing /tmpRoot/.upd@te//etc/dhclient/dhclient-script...
Removing /tmpRoot/.upd@te//etc/dhclient/ipv4/dhclient.conf...
Removing /tmpRoot/.upd@te//etc/dhclient/ipv6/dhclient.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/www/SSLProfile.json...
Removing /tmpRoot/.upd@te//etc/vimrc...
Removing /tmpRoot/.upd@te//usr/syno/etc/cacert.pem...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_modules_list...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_chain_list...
Removing /tmpRoot/.upd@te//usr/local/bin/python*...
Removing /tmpRoot/.upd@te//etc/sudoers...
Removing /tmpRoot/.upd@te//usr/syno/etc/autoupdate.notify...
Removing /tmpRoot/.upd@te//etc/systemd/*.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/nslcd.conf.template...
Removing /tmpRoot/.upd@te//etc/syslog-ng/patterndb.d/nslcd.conf...
Removing /tmpRoot/.upd@te//etc/motd...
Removing /tmpRoot/.upd@te//etc/rc.subr...
Removing /tmpRoot/.upd@te//usr/syno/etc/hybrid_ha_model_groups.list...
Removing /tmpRoot/.upd@te//usr/syno/etc/wedjat.status...
Removing /tmpRoot/.upd@te//etc/pam.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/vfs...
Removing /tmpRoot/.upd@te//var/run...
Removing /tmpRoot/.upd@te//var/update...
Removing /tmpRoot/.upd@te//var/state/ups...
Removing /tmpRoot/.upd@te//etc/ups...
Removing /tmpRoot/.upd@te//var/spool/postfix...
Removing /tmpRoot/.upd@te//usr/local/cups/backend...
Removing /tmpRoot/.upd@te//usr/local/cups/mime...
Removing /tmpRoot/.upd@te//etc/fw_security/sysconf...
Removing /tmpRoot/.upd@te//etc/init...
Removing /tmpRoot/.upd@te//etc/logrotate.d...
Removing /tmpRoot/.upd@te//etc/syslog-ng...
Removing /tmpRoot/.upd@te//var/lib/dpkg...
Removing /tmpRoot/.upd@te//etc/httpd/conf...
Removing /tmpRoot/.upd@te//etc/postgresql...
Removing /tmpRoot/.upd@te//etc/nginx...
Removing /tmpRoot/.upd@te//etc/wide-dhcpv6...
Removing /tmpRoot/.upd@te//etc/apparmor.d...
Removing /tmpRoot/.upd@te//var/dynlib...
Removing /tmpRoot/.upd@te//etc/iproute2/script...
Removing /tmpRoot/.upd@te//etc/ssl/certs...
Removing /tmpRoot/.upd@te//etc/dbus-1...
Removing /tmpRoot/.upd@te//usr/syno/etc/dbus-1...
Removing /tmpRoot/.upd@te//etc/avahi...
Removing /tmpRoot/.upd@te//usr/syno/etc/synovpnclient/scripts...
Removing /tmpRoot/.upd@te//var/lib/apparmor...
Removing /tmpRoot/.upd@te//usr/syno/etc/www/app.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/rc.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/bluetooth/...
Removing /tmpRoot/.upd@te//usr/syno/etc/smallupdate_patch...
Removing /tmpRoot/.upd@te//etc/ImageMagick-6...
Removing /tmpRoot/.upd@te//usr/syno/etc/logcollector...
Removing /tmpRoot/.upd@te//var/cache/texts...
Removing /tmpRoot/.upd@te//usr/syno/etc/rc.sysv...
Removing /tmpRoot/.upd@te//usr/syno/etc/nslcd.profile...
Removing /tmpRoot/.upd@te//usr/syno/etc/user.data.conf...
Removing /tmpRoot/.upd@te//var/lib/drive-bundle/firmware...
Removing /tmpRoot/.upd@te//usr/syno/etc/backgroundtask...
cp: can't create '/tmpRoot/.old_patch_info/VERSION': No such file or directory
cp: can't create '/tmpRoot/.old_patch_info/synoinfo.conf': No such file or directory
cp: can't create '/tmpRoot/.old_patch_info/.system_info': No such file or directory
Found /tmpData/SynoUpgradeV2.tar. Hide it.
-rw-r--r--    1 root     root     821452288 Jun  2 11:44 /tmpData/SynoUpgradeV2.tar
'/tmpData/SynoUpgradeV2.tar' -> '/tmpData/.SynoUpgradeV2.tar'
Found /tmpData/SynoUpgradePackages. Hide it.
/tmpData/SynoUpgradePackages:
-rw-r--r--    1 root     root       4460759 May  2 12:13 ActiveInsight-x86_64-1.4.0-1706.spk
-rw-r--r--    1 root     root       2555328 May  2 12:13 BackupRestoreManager-x86_64-2.3.0-12204.spk
-rw-r--r--    1 root     root        853688 May  2 12:13 DhcpServer-x86_64-1.0.0-0034.spk
-rw-r--r--    1 root     root       6263322 May  2 12:13 FileStation-x86_64-1.3.3-1399.spk
-rw-r--r--    1 root     root       6362226 May  2 12:13 HighAvailability-x86_64-2.1.2-1380.spk
-rw-r--r--    1 root     root       4016311 May  2 12:13 HybridShare-apollolake-1.3.0-0833.spk
-rw-r--r--    1 root     root        512401 May  2 12:13 OAuthService-x86_64-1.1.2-0071.spk
-rw-r--r--    1 root     root       5488059 May  2 12:13 Python2-x86_64-2.7.18-1004.spk
-rw-r--r--    1 root     root      10987977 May  2 12:13 SMBService-x86_64-4.10.18-0434.spk
-rw-r--r--    1 root     root       4579131 May  2 12:13 ScsiTarget-x86_64-1.0.4-0239.spk
-rw-r--r--    1 root     root       1299010 May  2 12:13 SecureSignIn-x86_64-1.0.5-0171.spk
-rw-r--r--    1 root     root       8114664 May  2 12:13 SynologyUniversalSearch-x86_64-1.6.0-0534.spk
-rw-r--r--    1 root     root       1523246 May  2 12:13 USBCopy-x86_64-2.2.1-1103.spk
'/tmpData/SynoUpgradePackages' -> '/tmpData/.SynoUpgradePackages'
Not found /tmpData/SynoManutilPackages.
Found /tmpData/SynoUpgradeIndexdb.txz. Hide it.
-rw-r--r--    1 root     root       1444408 Apr  1 10:01 /tmpData/SynoUpgradeIndexdb.txz
'/tmpData/SynoUpgradeIndexdb.txz' -> '/tmpData/.SynoUpgradeIndexdb.txz'
Found /tmpData/SynoUpgradeSynohdpackImg.txz. Hide it.
-rw-r--r--    1 root     root      24064292 Apr  1 10:01 /tmpData/SynoUpgradeSynohdpackImg.txz
'/tmpData/SynoUpgradeSynohdpackImg.txz' -> '/tmpData/.SynoUpgradeSynohdpackImg.txz'
Do [/bin/tar xf /tmpData/.SynoUpgradeV2.tar -C /tmpRoot]... try=1/2
Success to untar main tarball
Untaring .SynoUpgradeIndexdb.txz
Untaring .SynoUpgradeSynohdpackImg.txz
DataMnt and RootMnt are same devices. No need to move packages
Touching /tmpRoot/var/.UpgradeBootup
temporarily remove +a flag from files in backup dir:
cp: can't create '/tmpRoot/*': No such file or directory
restore +a attribute after config restored:
mknod: /dev/synobios: File exists
Starting /usr/syno/bin/synohdcfgen...
/usr/syno/bin/synohdcfgen returns 0
End upgrade procedure
============upgrade
------------bootup-smallupdate
Failed to AssertFileKeyValueEqual
  value1: /etc.defaults/VERSION:smallfixnumber -> 0
  value2: /tmpRoot/.syno/patch/VERSION:smallfixnumber => 2
Skip bootup smallupdate, because root is not matched to junior
============bootup-smallupdate
Failed to AssertFileKeyValueEqual
  value1: /etc.defaults/VERSION:smallfixnumber -> 0
  value2: /tmpRoot/.syno/patch/VERSION:smallfixnumber => 2
Exit on error [7] root not matched with junior...
Thu Jun  2 11:46:17 UTC 2022
/dev/md0 /tmpRoot ext4 rw,relatime,prjquota,rootprjquota,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
DiskStation> 

 

Link to comment
Share on other sites

3 minutes ago, Doerk32 said:

sorry i use  only the ds918+ 

in the bios is no hot plug

i use 3 hdds

no i don´t

 

This is my first log to analyze, but
Perhaps the dsm pat file you used is for the small patch for update 2.
Is the size of the pat file over 300mb?
If not, you have downloaded the pat file incorrectly.
Use the file from the following link

 

https://global.download.synology.com/download/DSM/release/7.1/42661-1/DSM_DS918%2B_42661.pat

 

------------bootup-smallupdate

Failed to AssertFileKeyValueEqual

value1: /etc.defaults/VERSION:smallfixnumber -> 0

value2: /tmpRoot/.syno/patch/VERSION:smallfixnumber => 2

Skip bootup smallupdate, because root is not matched to junior

Link to comment
Share on other sites

tc@box:~$ wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz
Connecting to github.com (140.82.121.4:443)
Connecting to raw.githubusercontent.com (185.199.108.133:443)
saving to 'my.sh.gz'
my.sh.gz             100% |********************************|  5006  0:00:00 ETA
'my.sh.gz' saved
tc@box:~$ tar -zxvf my.sh.gz
my.sh
tc@box:~$ ./my.sh DS918+
Checking Internet Access -> OK
Checking if a newer mshell version exists on the repo -> Version is current

MODEL is DS918+

tcrppart is sdd3

making directory  /mnt/sdd3/auxfiles
making link /home/tc/custom-module

TARGET_PLATFORM is apollolake
SYNOMODEL is ds918p_42661
Checking Internet Access -> OK
Checking if a newer version exists on the repo -> There is a newer version of the script on the repo should we use that ? [yY/nN]OK, updating, please re-run after updating
Updating tinycore loader with latest updates
Backing up files to /mnt/sdd3//mydata.tgz
Done.
Performing a full TCRP upgrade
Warning some of your local files will be moved to /home/tc/old/xxxx.2022-Jun-02-12-42
Updating custom_config.json
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 33842  100 33842    0     0   124k      0 --:--:-- --:--:-- --:--:--  124k
Updating custom_config_jun.json
mv: cannot stat 'custom_config_jun.json': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  8954  100  8954    0     0  37000      0 --:--:-- --:--:-- --:--:-- 37000
Updating global_config.json
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  5692  100  5692    0     0  21642      0 --:--:-- --:--:-- --:--:-- 21642
Updating modules.alias.3.json.gz
mv: cannot stat 'modules.alias.3.json.gz': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  5591  100  5591    0     0  21178      0 --:--:-- --:--:-- --:--:-- 21178
Updating modules.alias.4.json.gz
mv: cannot stat 'modules.alias.4.json.gz': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 89007  100 89007    0     0   306k      0 --:--:-- --:--:-- --:--:--  306k
Updating rpext-index.json
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  211k  100  211k    0     0   455k      0 --:--:-- --:--:-- --:--:-- 2898k
Updating user_config.json
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   431  100   431    0     0   1703      0 --:--:-- --:--:-- --:--:--  1703
Updating dtc
mv: cannot stat 'dtc': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  146k  100  146k    0     0   497k      0 --:--:-- --:--:-- --:--:--  497k
Updating rploader.sh
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 91060  100 91060    0     0   322k      0 --:--:-- --:--:-- --:--:--  322k
Updating ds1621p.dts
mv: cannot stat 'ds1621p.dts': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  3026  100  3026    0     0  11913      0 --:--:-- --:--:-- --:--:-- 11913
Updating ds920p.dts
mv: cannot stat 'ds920p.dts': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  2423  100  2423    0     0   9212      0 --:--:-- --:--:-- --:--:--  9212
Please make sure you are using the latest 1GB img before using backup option
Current /home/tc size is 2.5M , try to keep it less than 1GB as it might not fit into your image
Should i update the sdd with your current files [Yy/Nn]
OK, keeping last status
Do you want to restore your own user_config.json from old directory ?  [Yy/Nn]
n
OK Remember that the new user_config.json file is used and your own user_config.json is deleted.
Before changing user_config.json
{
  "extra_cmdline": {
    "pid": "0xa4a5",
    "vid": "0x0525",
    "sn": "1230LWN009033",
    "mac1": "0011322A46E7",
    "SataPortMap": "58",
    "DiskIdxMap": "0A00"
  },
  "synoinfo": {

          "internalportcfg" : "0xffff",
          "maxdisks" : "16",
              "support_bde_internal_10g" : "no",
              "support_disk_compatibility" : "no",
          "support_memory_compatibility" : "no"


},
  "ramdisk_copy": {


}

}
Serial Number for Model : 1790PDN019343
Mac Address for Model DS918+ : 00:11:32:C6:15:BD
Should i update the user_config.json with these values ? [Yy/Nn]
Two or more Ethernet Interface was detected!! 2
Add mac2 automatically.
Mac2 Address for Model DS918+ : 00:11:32:7A:8E:36
After changing user_config.json
{
  "extra_cmdline": {"mac2": "0011327A8E36","netif_num": "2",
    "pid": "0xa4a5",
    "vid": "0x0525",
    "sn": "1790PDN019343",
    "mac1": "001132C615BD",
    "SataPortMap": "58",
    "DiskIdxMap": "0A00"
  },
  "synoinfo": {
    "internalportcfg": "0xffff",
    "maxdisks": "16",
    "support_bde_internal_10g": "no",
    "support_disk_compatibility": "no",
    "support_memory_compatibility": "no"
  },
  "ramdisk_copy": {}
}
Found USB Disk SerialNumber:
Vendor ID : 0xffff Product ID : 0x5678
Should i update the user_config.json with these values ? [Yy/Nn]

Found "00:12.0 Intel Corporation Device 31e3 (rev 06)"
Detected 2 ports/2 drives. Override # of ports or ENTER to accept <2>

Found "03:00.0 ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)"
Detected 2 ports/1 drives. Override # of ports or ENTER to accept <2>

Recommended settings:
SataPortMap=22
DiskIdxMap=0002

Should i update the user_config.json with these values ? [Yy/Nn] y
Done.


DSM PAT file pre-downloading in progress...
https://global.download.synology.com/download/DSM/release/7.1/42661-1/DSM_DS918+_42661.pat
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  346M  100  346M    0     0  21.0M      0  0:00:16  0:00:16 --:--:-- 8500k
Pat file  sha256sum is : 4e8a9d82a8a1fde5af9a934391080b7bf6b91811d9583acb73b90fb6577e22d7
verifyid  sha256sum is : 4e8a9d82a8a1fde5af9a934391080b7bf6b91811d9583acb73b90fb6577e22d7
pat file sha256sum is OK !

Loader Building in progress...

Rploader Version : 0.8.0.0
Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : develop
Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master
Extensions :   redpill-misc
Extensions URL : "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json"
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.apollolake-7.0.dev.txz/download
TOOLKIT_SHA : d349fa644392d4cfab8191243ee38aaa32bd517208c144678e0c855cb5a619ea
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/apollolake-source/linux-4.4.x.txz/download
SYNOKERNEL_SHA : af815ee065775d2e569fd7176e25c8ba7ee17a03361557975c8e5a4b64230c5b
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : apollolake
TARGET_VERSION    : 7.1.0
TARGET_REVISION : 42661
REDPILL_LKM_MAKE_TARGET : test-v7
KERNEL_MAJOR : 4
MODULE_ALIAS_FILE :  modules.alias.4.json
SYNOMODEL : ds918p_42661
MODEL : DS918+
Local Cache Folder : /mnt/sdd3/auxfiles
DATE Internet : 02062022 Local : 02062022
Checking Internet Access -> OK
Checking if a newer version exists on the main repo -> Version is current
Cloning into 'redpill-lkm'...
remote: Enumerating objects: 1253, done.
remote: Counting objects: 100% (325/325), done.
remote: Compressing objects: 100% (41/41), done.
remote: Total 1253 (delta 302), reused 284 (delta 283), pack-reused 928
Receiving objects: 100% (1253/1253), 469.84 KiB | 8.39 MiB/s, done.
Resolving deltas: 100% (865/865), done.
Cloning into 'redpill-load'...
remote: Enumerating objects: 1998, done.
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 1998 (delta 0), reused 1 (delta 0), pack-reused 1994
Receiving objects: 100% (1998/1998), 114.70 MiB | 27.09 MiB/s, done.
Resolving deltas: 100% (937/937), done.
No extra build option or static specified, using default <static>
Using static compiled redpill extension
Removing any old redpill.ko modules
Looking for redpill for : ds918p_42661
Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-4.4.180plus.tgz
Extracting module
Got redpill-linux-v4.4.180+.ko
Testing modules.alias.4.json -> File OK
------------------------------------------------------------------------------------------------
It looks that you will need the following modules :


Found VGA Controller : pciid 8086d00003184  Required Extension : i915
Searching for matching extension for i915
Found SATA Controller : pciid 8086d000031e3  Required Extension :
No matching extension
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== pocopico.igb ==========================================
[#] Extension name: igb
[#] Description: Adds Intel(R) Gigabit Ethernet Network Driver Support
[#] To get help visit: <todo>
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/igb
[#] Software author: https://github.com/pocopico
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

Found Ethernet Interface : pciid 8086d000010c9 Required Extension : igb
Searching for matching extension for igb
Found matching extension :
"https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json"
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%

[!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.igb/pocopico.igb.json). For more info use "ext-manager.sh info pocopico.igb"

*** Process will exit ***
Found Ethernet Interface : pciid 8086d000010c9 Required Extension : igb
Searching for matching extension for igb
Found matching extension :
"https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json"
Found SATA Controller : pciid 1b21d00000612  Required Extension : ahci
Searching for matching extension for ahci
------------------------------------------------------------------------------------------------
Starting loader creation
Found tinycore cache folder, linking to home/tc/custom-module
Checking user_config.json : Done
Entering redpill-load directory
Removing bundled exts directories
Cache directory OK
Found build request for revision greater than 42218
Getting required extraction tool
------------------------------------------------------------------
Checking tinycore cache folder
Found tinycore cache folder, linking to home/tc/custom-module
Creating temp folder /tmp/synoesp
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  345M  100  345M    0     0  29.5M      0  0:00:11  0:00:11 --:--:-- 28.8M
Entering synoesp
extract rd.gz
finish
cpio: dev/console: Cannot mknod: Operation not permitted
cpio: dev/net/tun: Cannot mknod: Operation not permitted
42506 blocks
extract rd
mkdir: cannot create directory '/mnt/sdd3/auxfiles': File exists
Copying required files to local cache folder for future use
Copying usr/lib/libcurl.so.4 to /mnt/sdd3/auxfiles
Copying usr/lib/libmbedcrypto.so.5 to /mnt/sdd3/auxfiles
Copying usr/lib/libmbedtls.so.13 to /mnt/sdd3/auxfiles
Copying usr/lib/libmbedx509.so.1 to /mnt/sdd3/auxfiles
Copying usr/lib/libmsgpackc.so.2 to /mnt/sdd3/auxfiles
Copying usr/lib/libsodium.so to /mnt/sdd3/auxfiles
Copying usr/lib/libsynocodesign-ng-virtual-junior-wins.so.7 to /mnt/sdd3/auxfiles
Copying usr/syno/bin/scemd to /mnt/sdd3/auxfiles
Copying required libraries to local lib directory
Linking lib to lib64
Copying executable
Removing temp folder /tmp/synoesp
Checking if tools is accessible
/bin/syno_extract_system_patch: /usr/local/lib/libcurl.so.4: no version information available (required by /bin/syno_extract_system_patch)
Copyright (c) 2003-2021 Synology Inc. All rights reserved.

/bin/syno_extract_system_patch PATCH_PATH DEST_PATH
Executed succesfully
Creating temp folder /tmp/pat
Checking for cached pat file
Found tinycore cache folder, linking to home/tc/custom-module
Found locally cached pat file /home/tc/custom-module/ds918p_42661.pat
File /home/tc/custom-module/ds918p_42661.pat, is  encrypted
Extracting encrypted pat file : /home/tc/custom-module/ds918p_42661.pat to /tmp/pat
/bin/syno_extract_system_patch: /usr/local/lib/libcurl.so.4: no version information available (required by /bin/syno_extract_system_patch)
Creating unecrypted pat file ds918p_42661.pat to /home/tc/redpill-load/cache folder
./VERSION
Pat file  sha256sum is : e57f2e5ce6b8c5fda59b6e330be9e3b981143c7e2860a88d600052148562d424
Checking config file existence -> OK
Editing config file -> Verifying config file -> OK !
Clearing temp folders
Processing add_extensions entries found on custom_config.json file :   redpill-misc
Adding extension "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json"
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== redpill-misc ==========================================
[#] Extension name: Misc shell
[#] Description: Misc shell
[#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Update URL: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

Updating extension : redpill-misc contents for model : ds918p_42661
[#] Checking runtime for required tools... [OK]
[#] Updating ds918p_42661 platforms extensions...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%

[#] Filling-in newly downloaded recipe for extension redpill-misc platform ds918p_42661
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/install.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/install.sh file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install-all.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/install-all.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/install-all.sh file...  [OK]
[#] Downloading remote file https://github.com/tsl0922/ttyd/releases/download/1.6.3/ttyd.x86_64 to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/ttyd
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/ttyd file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install_rd.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/install_rd.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/install_rd.sh file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/lrzsz.tar.gz
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/lrzsz.tar.gz file...  [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/...  [OK]
[#] Successfully processed recipe for extension redpill-misc platform ds918p_42661
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/...  [OK]
[#] Checking runtime for required tools... [OK]
[#] Updating extensions...

[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json...
[#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== redpill-boot-wait ==========================================
[#] Extension name: RedPill Bootwait
[#] Description: Simple extension which stops the execution early waiting for the boot device to appear
[#] To get help visit: https://github.com/pocopico/rp-ext/redpill-boot-wait
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/redpill-boot-wait
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds2422p_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds920p_42550 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

[#] Checking runtime for required tools... [OK]
[#] Updating pocopico.igb extension...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%

[#] Extension pocopico.igb index is already up to date
[#] Updating redpill-boot-wait extension...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%

[#] Extension redpill-boot-wait index is already up to date
[#] Updating redpill-misc extension...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] Checking runtime for required tools... [OK]
[#] Updating ds918p_42661 platforms extensions...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/releases/ds918p_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%

[#] Filling-in newly downloaded recipe for extension pocopico.igb platform ds918p_42661
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/releases/igb-4.4.180plus.tgz to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_42661/igb-4.4.180plus.tgz
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_42661/igb-4.4.180plus.tgz file... [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_42661/igb-4.4.180plus.tgz to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_42661/... [OK]
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/src/check-igb.sh to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_42661/check-igb.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_42661/check-igb.sh file... [OK]
[#] Successfully processed recipe for extension pocopico.igb platform ds918p_42661
[#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%
[#] Filling-in newly downloaded recipe for extension redpill-boot-wait platform ds918p_42661
[#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds918p_42661/boot-wait.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds918p_42661/boot-wait.sh file... [OK]
[#] Successfully processed recipe for extension redpill-boot-wait platform ds918p_42661
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%
[#] Extension redpill-misc for ds918p_42661 platform is already up to date
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds918p_42661/boot-wait.sh file... [OK]
[#] Updating extensions... [OK]
[#] Verifying /home/tc/redpill-load/cache/ds918p_42661.pat file... [OK]
[#] Unpacking /home/tc/redpill-load/cache/ds918p_42661.pat file to /home/tc/redpill-load/build/1654173822/pat-ds918p_42661-unpacked... [OK]
[#] Verifying /home/tc/redpill-load/build/1654173822/pat-ds918p_42661-unpacked/zImage file... [OK]
[#] Patching /home/tc/redpill-load/build/1654173822/pat-ds918p_42661-unpacked/zImage to /home/tc/redpill-load/build/1654173822/zImage-patched... [OK]
[#] Verifying /home/tc/redpill-load/build/1654173822/pat-ds918p_42661-unpacked/rd.gz file... [OK]
[#] Unpacking /home/tc/redpill-load/build/1654173822/pat-ds918p_42661-unpacked/rd.gz file to /home/tc/redpill-load/build/1654173822/rd-ds918p_42661-unpacked... [OK]
[#] Apply patches to /home/tc/redpill-load/build/1654173822/rd-ds918p_42661-unpacked... [OK]
[#] Patching config files in ramdisk... [OK]
[#] Adding OS config patching... [OK]
[#] Repacking ramdisk to /home/tc/redpill-load/build/1654173822/rd-patched-ds918p_42661.gz... [OK]
[#] Bundling extensions... [#] Checking runtime for required tools... [OK]
[#] Dumping ds918p_42661 platform extensions to /home/tc/redpill-load/build/1654173822/custom-initrd/exts... [OK]
[#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1654173822/custom.gz... [OK]
[#] Generating GRUB config... [OK]
[#] Creating loader image at loader.img... [OK]
[#] Cleaning up... [OK]
Mounting /dev/sdd1 to localdiskp1
/dev/sdd2 localdiskp2
Creating tinycore entry
menuentry 'Tiny Core Image Build' {
        savedefault
        set root=(hd0,msdos3)
        echo Loading Linux...
        linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791
        echo Loading initramfs...
        initrd /corepure64.gz
        echo Booting TinyCore for loader creation
}
Entries in Localdisk bootloader :
=======================================================================
menuentry 'RedPill DS918+ v7.1.0-42661 (USB, Verbose)' {
menuentry 'RedPill DS918+ v7.1.0-42661 (SATA, Verbose)' {
menuentry 'Tiny Core Image Build' {
Caching files for future use
Found /home/tc/redpill-load/cache/ds918p_42661.pat, copying to cache directory : /mnt/sdd3/auxfiles
Saving user session for future use. Saving current extensions  -> OK !
Saving current user_config.json  -> OK !

Backup in progress...

Clearing local redpill files
Please make sure you are using the latest 1GB img before using backup option
Current /home/tc size is 2.3M , try to keep it less than 1GB as it might not fit into your image
Should i update the sdd with your current files [Yy/Nn]
Backing up home files to sdd : Backing up files to /mnt/sdd3//mydata.tgz
Done.

tc@box:~$ sudo reboot
tc@box:~$

this is log from the boot-stick installation

Link to comment
Share on other sites

18 minutes ago, Doerk32 said:

tc@box:~$ wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz
Connecting to github.com (140.82.121.4:443)
Connecting to raw.githubusercontent.com (185.199.108.133:443)
saving to 'my.sh.gz'
my.sh.gz             100% |********************************|  5006  0:00:00 ETA
'my.sh.gz' saved
tc@box:~$ tar -zxvf my.sh.gz
my.sh
tc@box:~$ ./my.sh DS918+
Checking Internet Access -> OK
Checking if a newer mshell version exists on the repo -> Version is current

MODEL is DS918+

tcrppart is sdd3

making directory  /mnt/sdd3/auxfiles
making link /home/tc/custom-module

TARGET_PLATFORM is apollolake
SYNOMODEL is ds918p_42661
Checking Internet Access -> OK
Checking if a newer version exists on the repo -> There is a newer version of the script on the repo should we use that ? [yY/nN]OK, updating, please re-run after updating
Updating tinycore loader with latest updates
Backing up files to /mnt/sdd3//mydata.tgz
Done.
Performing a full TCRP upgrade
Warning some of your local files will be moved to /home/tc/old/xxxx.2022-Jun-02-12-42
Updating custom_config.json
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 33842  100 33842    0     0   124k      0 --:--:-- --:--:-- --:--:--  124k
Updating custom_config_jun.json
mv: cannot stat 'custom_config_jun.json': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  8954  100  8954    0     0  37000      0 --:--:-- --:--:-- --:--:-- 37000
Updating global_config.json
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  5692  100  5692    0     0  21642      0 --:--:-- --:--:-- --:--:-- 21642
Updating modules.alias.3.json.gz
mv: cannot stat 'modules.alias.3.json.gz': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  5591  100  5591    0     0  21178      0 --:--:-- --:--:-- --:--:-- 21178
Updating modules.alias.4.json.gz
mv: cannot stat 'modules.alias.4.json.gz': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 89007  100 89007    0     0   306k      0 --:--:-- --:--:-- --:--:--  306k
Updating rpext-index.json
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  211k  100  211k    0     0   455k      0 --:--:-- --:--:-- --:--:-- 2898k
Updating user_config.json
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   431  100   431    0     0   1703      0 --:--:-- --:--:-- --:--:--  1703
Updating dtc
mv: cannot stat 'dtc': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  146k  100  146k    0     0   497k      0 --:--:-- --:--:-- --:--:--  497k
Updating rploader.sh
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 91060  100 91060    0     0   322k      0 --:--:-- --:--:-- --:--:--  322k
Updating ds1621p.dts
mv: cannot stat 'ds1621p.dts': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  3026  100  3026    0     0  11913      0 --:--:-- --:--:-- --:--:-- 11913
Updating ds920p.dts
mv: cannot stat 'ds920p.dts': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  2423  100  2423    0     0   9212      0 --:--:-- --:--:-- --:--:--  9212
Please make sure you are using the latest 1GB img before using backup option
Current /home/tc size is 2.5M , try to keep it less than 1GB as it might not fit into your image
Should i update the sdd with your current files [Yy/Nn]
OK, keeping last status
Do you want to restore your own user_config.json from old directory ?  [Yy/Nn]
n
OK Remember that the new user_config.json file is used and your own user_config.json is deleted.
Before changing user_config.json
{
  "extra_cmdline": {
    "pid": "0xa4a5",
    "vid": "0x0525",
    "sn": "1230LWN009033",
    "mac1": "0011322A46E7",
    "SataPortMap": "58",
    "DiskIdxMap": "0A00"
  },
  "synoinfo": {

          "internalportcfg" : "0xffff",
          "maxdisks" : "16",
              "support_bde_internal_10g" : "no",
              "support_disk_compatibility" : "no",
          "support_memory_compatibility" : "no"


},
  "ramdisk_copy": {


}

}
Serial Number for Model : 1790PDN019343
Mac Address for Model DS918+ : 00:11:32:C6:15:BD
Should i update the user_config.json with these values ? [Yy/Nn]
Two or more Ethernet Interface was detected!! 2
Add mac2 automatically.
Mac2 Address for Model DS918+ : 00:11:32:7A:8E:36
After changing user_config.json
{
  "extra_cmdline": {"mac2": "0011327A8E36","netif_num": "2",
    "pid": "0xa4a5",
    "vid": "0x0525",
    "sn": "1790PDN019343",
    "mac1": "001132C615BD",
    "SataPortMap": "58",
    "DiskIdxMap": "0A00"
  },
  "synoinfo": {
    "internalportcfg": "0xffff",
    "maxdisks": "16",
    "support_bde_internal_10g": "no",
    "support_disk_compatibility": "no",
    "support_memory_compatibility": "no"
  },
  "ramdisk_copy": {}
}
Found USB Disk SerialNumber:
Vendor ID : 0xffff Product ID : 0x5678
Should i update the user_config.json with these values ? [Yy/Nn]

Found "00:12.0 Intel Corporation Device 31e3 (rev 06)"
Detected 2 ports/2 drives. Override # of ports or ENTER to accept <2>

Found "03:00.0 ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)"
Detected 2 ports/1 drives. Override # of ports or ENTER to accept <2>

Recommended settings:
SataPortMap=22
DiskIdxMap=0002

Should i update the user_config.json with these values ? [Yy/Nn] y
Done.


DSM PAT file pre-downloading in progress...
https://global.download.synology.com/download/DSM/release/7.1/42661-1/DSM_DS918+_42661.pat
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  346M  100  346M    0     0  21.0M      0  0:00:16  0:00:16 --:--:-- 8500k
Pat file  sha256sum is : 4e8a9d82a8a1fde5af9a934391080b7bf6b91811d9583acb73b90fb6577e22d7
verifyid  sha256sum is : 4e8a9d82a8a1fde5af9a934391080b7bf6b91811d9583acb73b90fb6577e22d7
pat file sha256sum is OK !

Loader Building in progress...

Rploader Version : 0.8.0.0
Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : develop
Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master
Extensions :   redpill-misc
Extensions URL : "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json"
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.apollolake-7.0.dev.txz/download
TOOLKIT_SHA : d349fa644392d4cfab8191243ee38aaa32bd517208c144678e0c855cb5a619ea
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/apollolake-source/linux-4.4.x.txz/download
SYNOKERNEL_SHA : af815ee065775d2e569fd7176e25c8ba7ee17a03361557975c8e5a4b64230c5b
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : apollolake
TARGET_VERSION    : 7.1.0
TARGET_REVISION : 42661
REDPILL_LKM_MAKE_TARGET : test-v7
KERNEL_MAJOR : 4
MODULE_ALIAS_FILE :  modules.alias.4.json
SYNOMODEL : ds918p_42661
MODEL : DS918+
Local Cache Folder : /mnt/sdd3/auxfiles
DATE Internet : 02062022 Local : 02062022
Checking Internet Access -> OK
Checking if a newer version exists on the main repo -> Version is current
Cloning into 'redpill-lkm'...
remote: Enumerating objects: 1253, done.
remote: Counting objects: 100% (325/325), done.
remote: Compressing objects: 100% (41/41), done.
remote: Total 1253 (delta 302), reused 284 (delta 283), pack-reused 928
Receiving objects: 100% (1253/1253), 469.84 KiB | 8.39 MiB/s, done.
Resolving deltas: 100% (865/865), done.
Cloning into 'redpill-load'...
remote: Enumerating objects: 1998, done.
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 1998 (delta 0), reused 1 (delta 0), pack-reused 1994
Receiving objects: 100% (1998/1998), 114.70 MiB | 27.09 MiB/s, done.
Resolving deltas: 100% (937/937), done.
No extra build option or static specified, using default <static>
Using static compiled redpill extension
Removing any old redpill.ko modules
Looking for redpill for : ds918p_42661
Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-4.4.180plus.tgz
Extracting module
Got redpill-linux-v4.4.180+.ko
Testing modules.alias.4.json -> File OK
------------------------------------------------------------------------------------------------
It looks that you will need the following modules :


Found VGA Controller : pciid 8086d00003184  Required Extension : i915
Searching for matching extension for i915
Found SATA Controller : pciid 8086d000031e3  Required Extension :
No matching extension
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== pocopico.igb ==========================================
[#] Extension name: igb
[#] Description: Adds Intel(R) Gigabit Ethernet Network Driver Support
[#] To get help visit: <todo>
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/igb
[#] Software author: https://github.com/pocopico
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

Found Ethernet Interface : pciid 8086d000010c9 Required Extension : igb
Searching for matching extension for igb
Found matching extension :
"https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json"
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%

[!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.igb/pocopico.igb.json). For more info use "ext-manager.sh info pocopico.igb"

*** Process will exit ***
Found Ethernet Interface : pciid 8086d000010c9 Required Extension : igb
Searching for matching extension for igb
Found matching extension :
"https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json"
Found SATA Controller : pciid 1b21d00000612  Required Extension : ahci
Searching for matching extension for ahci
------------------------------------------------------------------------------------------------
Starting loader creation
Found tinycore cache folder, linking to home/tc/custom-module
Checking user_config.json : Done
Entering redpill-load directory
Removing bundled exts directories
Cache directory OK
Found build request for revision greater than 42218
Getting required extraction tool
------------------------------------------------------------------
Checking tinycore cache folder
Found tinycore cache folder, linking to home/tc/custom-module
Creating temp folder /tmp/synoesp
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  345M  100  345M    0     0  29.5M      0  0:00:11  0:00:11 --:--:-- 28.8M
Entering synoesp
extract rd.gz
finish
cpio: dev/console: Cannot mknod: Operation not permitted
cpio: dev/net/tun: Cannot mknod: Operation not permitted
42506 blocks
extract rd
mkdir: cannot create directory '/mnt/sdd3/auxfiles': File exists
Copying required files to local cache folder for future use
Copying usr/lib/libcurl.so.4 to /mnt/sdd3/auxfiles
Copying usr/lib/libmbedcrypto.so.5 to /mnt/sdd3/auxfiles
Copying usr/lib/libmbedtls.so.13 to /mnt/sdd3/auxfiles
Copying usr/lib/libmbedx509.so.1 to /mnt/sdd3/auxfiles
Copying usr/lib/libmsgpackc.so.2 to /mnt/sdd3/auxfiles
Copying usr/lib/libsodium.so to /mnt/sdd3/auxfiles
Copying usr/lib/libsynocodesign-ng-virtual-junior-wins.so.7 to /mnt/sdd3/auxfiles
Copying usr/syno/bin/scemd to /mnt/sdd3/auxfiles
Copying required libraries to local lib directory
Linking lib to lib64
Copying executable
Removing temp folder /tmp/synoesp
Checking if tools is accessible
/bin/syno_extract_system_patch: /usr/local/lib/libcurl.so.4: no version information available (required by /bin/syno_extract_system_patch)
Copyright (c) 2003-2021 Synology Inc. All rights reserved.

/bin/syno_extract_system_patch PATCH_PATH DEST_PATH
Executed succesfully
Creating temp folder /tmp/pat
Checking for cached pat file
Found tinycore cache folder, linking to home/tc/custom-module
Found locally cached pat file /home/tc/custom-module/ds918p_42661.pat
File /home/tc/custom-module/ds918p_42661.pat, is  encrypted
Extracting encrypted pat file : /home/tc/custom-module/ds918p_42661.pat to /tmp/pat
/bin/syno_extract_system_patch: /usr/local/lib/libcurl.so.4: no version information available (required by /bin/syno_extract_system_patch)
Creating unecrypted pat file ds918p_42661.pat to /home/tc/redpill-load/cache folder
./VERSION
Pat file  sha256sum is : e57f2e5ce6b8c5fda59b6e330be9e3b981143c7e2860a88d600052148562d424
Checking config file existence -> OK
Editing config file -> Verifying config file -> OK !
Clearing temp folders
Processing add_extensions entries found on custom_config.json file :   redpill-misc
Adding extension "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json"
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== redpill-misc ==========================================
[#] Extension name: Misc shell
[#] Description: Misc shell
[#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Update URL: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

Updating extension : redpill-misc contents for model : ds918p_42661
[#] Checking runtime for required tools... [OK]
[#] Updating ds918p_42661 platforms extensions...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%

[#] Filling-in newly downloaded recipe for extension redpill-misc platform ds918p_42661
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/install.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/install.sh file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install-all.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/install-all.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/install-all.sh file...  [OK]
[#] Downloading remote file https://github.com/tsl0922/ttyd/releases/download/1.6.3/ttyd.x86_64 to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/ttyd
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/ttyd file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install_rd.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/install_rd.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/install_rd.sh file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/lrzsz.tar.gz
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/lrzsz.tar.gz file...  [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/...  [OK]
[#] Successfully processed recipe for extension redpill-misc platform ds918p_42661
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42661/...  [OK]
[#] Checking runtime for required tools... [OK]
[#] Updating extensions...

[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json...
[#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== redpill-boot-wait ==========================================
[#] Extension name: RedPill Bootwait
[#] Description: Simple extension which stops the execution early waiting for the boot device to appear
[#] To get help visit: https://github.com/pocopico/rp-ext/redpill-boot-wait
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/redpill-boot-wait
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds2422p_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds920p_42550 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

[#] Checking runtime for required tools... [OK]
[#] Updating pocopico.igb extension...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%

[#] Extension pocopico.igb index is already up to date
[#] Updating redpill-boot-wait extension...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%

[#] Extension redpill-boot-wait index is already up to date
[#] Updating redpill-misc extension...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] Checking runtime for required tools... [OK]
[#] Updating ds918p_42661 platforms extensions...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/releases/ds918p_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%

[#] Filling-in newly downloaded recipe for extension pocopico.igb platform ds918p_42661
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/releases/igb-4.4.180plus.tgz to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_42661/igb-4.4.180plus.tgz
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_42661/igb-4.4.180plus.tgz file... [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_42661/igb-4.4.180plus.tgz to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_42661/... [OK]
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/src/check-igb.sh to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_42661/check-igb.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.igb/ds918p_42661/check-igb.sh file... [OK]
[#] Successfully processed recipe for extension pocopico.igb platform ds918p_42661
[#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%
[#] Filling-in newly downloaded recipe for extension redpill-boot-wait platform ds918p_42661
[#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds918p_42661/boot-wait.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds918p_42661/boot-wait.sh file... [OK]
[#] Successfully processed recipe for extension redpill-boot-wait platform ds918p_42661
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%
[#] Extension redpill-misc for ds918p_42661 platform is already up to date
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds918p_42661/boot-wait.sh file... [OK]
[#] Updating extensions... [OK]
[#] Verifying /home/tc/redpill-load/cache/ds918p_42661.pat file... [OK]
[#] Unpacking /home/tc/redpill-load/cache/ds918p_42661.pat file to /home/tc/redpill-load/build/1654173822/pat-ds918p_42661-unpacked... [OK]
[#] Verifying /home/tc/redpill-load/build/1654173822/pat-ds918p_42661-unpacked/zImage file... [OK]
[#] Patching /home/tc/redpill-load/build/1654173822/pat-ds918p_42661-unpacked/zImage to /home/tc/redpill-load/build/1654173822/zImage-patched... [OK]
[#] Verifying /home/tc/redpill-load/build/1654173822/pat-ds918p_42661-unpacked/rd.gz file... [OK]
[#] Unpacking /home/tc/redpill-load/build/1654173822/pat-ds918p_42661-unpacked/rd.gz file to /home/tc/redpill-load/build/1654173822/rd-ds918p_42661-unpacked... [OK]
[#] Apply patches to /home/tc/redpill-load/build/1654173822/rd-ds918p_42661-unpacked... [OK]
[#] Patching config files in ramdisk... [OK]
[#] Adding OS config patching... [OK]
[#] Repacking ramdisk to /home/tc/redpill-load/build/1654173822/rd-patched-ds918p_42661.gz... [OK]
[#] Bundling extensions... [#] Checking runtime for required tools... [OK]
[#] Dumping ds918p_42661 platform extensions to /home/tc/redpill-load/build/1654173822/custom-initrd/exts... [OK]
[#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1654173822/custom.gz... [OK]
[#] Generating GRUB config... [OK]
[#] Creating loader image at loader.img... [OK]
[#] Cleaning up... [OK]
Mounting /dev/sdd1 to localdiskp1
/dev/sdd2 localdiskp2
Creating tinycore entry
menuentry 'Tiny Core Image Build' {
        savedefault
        set root=(hd0,msdos3)
        echo Loading Linux...
        linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791
        echo Loading initramfs...
        initrd /corepure64.gz
        echo Booting TinyCore for loader creation
}
Entries in Localdisk bootloader :
=======================================================================
menuentry 'RedPill DS918+ v7.1.0-42661 (USB, Verbose)' {
menuentry 'RedPill DS918+ v7.1.0-42661 (SATA, Verbose)' {
menuentry 'Tiny Core Image Build' {
Caching files for future use
Found /home/tc/redpill-load/cache/ds918p_42661.pat, copying to cache directory : /mnt/sdd3/auxfiles
Saving user session for future use. Saving current extensions  -> OK !
Saving current user_config.json  -> OK !

Backup in progress...

Clearing local redpill files
Please make sure you are using the latest 1GB img before using backup option
Current /home/tc size is 2.3M , try to keep it less than 1GB as it might not fit into your image
Should i update the sdd with your current files [Yy/Nn]
Backing up home files to sdd : Backing up files to /mnt/sdd3//mydata.tgz
Done.

tc@box:~$ sudo reboot
tc@box:~$

this is log from the boot-stick installation

 

 

The USB stick you are using is a bit strange.
Is the USB stick correct?
PID / VID is abnormal.

 

 

Found USB Disk SerialNumber:

Vendor ID : 0xffff Product ID : 0x5678

Should i update the user_config.json with these values ? [Yy/Nn]

 

 

Link to comment
Share on other sites

Posted (edited)
2 hours ago, Doerk32 said:

sorry i use  only the ds918+ 

in the bios is no hot plug

i use 3 hdds

no i don´t

 

It is not applicable to ds920+ or ds1621+ using dtc, but hot plug can be used as important in other models.
You say you couldn't find it in the bios, but the specifications of the motherboard say it is like the capture below.

 

https://www.asrock.com/mb/Intel/J5040-ITX/index.asp#Specification

 

스크린샷 2022-06-02 오후 11.01.48.png

Edited by Peter Suh
Link to comment
Share on other sites

i found this settings one hhd don`t supportet it so i remove them.

 i create then the ds920+ bootstick.

here is the log

tc@box:~$ ./rploader.sh clean now
Clearing local redpill files
tc@box:~$ ./my.sh DS920+ jumkey
Checking Internet Access -> OK
Checking if a newer mshell version exists on the repo -> Version is current

MODEL is DS920+

tcrppart is sdc3

making link /home/tc/custom-module

TARGET_PLATFORM is geminilake
SYNOMODEL is ds920p_42661
jumkey's dynamic auto dtc patch ext file pre-downloading in progress...
######################################################################### 100.0%
######################################################################### 100.0%
Before changing user_config.json
{
  "extra_cmdline": {
    "mac2": "001132C27143",
    "netif_num": "2",
    "pid": "0x5583",
    "vid": "0x0781",
    "sn": "20C0SBREPREDQ",
    "mac1": "00113243ED76",
    "SataPortMap": "22",
    "DiskIdxMap": "0002"
  },
  "synoinfo": {
    "internalportcfg": "0xffff",
    "maxdisks": "16",
    "support_bde_internal_10g": "no",
    "support_disk_compatibility": "no",
    "support_memory_compatibility": "no"
  },
  "ramdisk_copy": {}
}
Serial Number for Model : 2150SBRVAZJTM
Mac Address for Model DS920+ : 00:11:32:CB:57:74
Should i update the user_config.json with these values ? [Yy/Nn]
Two or more Ethernet Interface was detected!! 2
Add mac2 automatically.
Mac2 Address for Model DS920+ : 00:11:32:9D:F5:81
After changing user_config.json
{
  "extra_cmdline": {"mac2": "0011329DF581","netif_num": "2",
    "mac2": "001132C27143",
    "netif_num": "2",
    "pid": "0x5583",
    "vid": "0x0781",
    "sn": "2150SBRVAZJTM",
    "mac1": "001132CB5774",
    "SataPortMap": "22",
    "DiskIdxMap": "0002"
  },
  "synoinfo": {
    "internalportcfg": "0xffff",
    "maxdisks": "16",
    "support_bde_internal_10g": "no",
    "support_disk_compatibility": "no",
    "support_memory_compatibility": "no"
  },
  "ramdisk_copy": {}
}
Found SanDisk Ultra SerialNumber: 0501df3c15de762cca8a1e42f05539c2249d718422b452fd2ddceeb94b7ea504b6cc000000000000000000002e3343ceff8f01108355810762a6dd86
Vendor ID : 0x0781 Product ID : 0x5583
Should i update the user_config.json with these values ? [Yy/Nn]

Found "00:12.0 Intel Corporation Device 31e3 (rev 06)"
Detected 2 ports/2 drives. Override # of ports or ENTER to accept <2>

Found "03:00.0 ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)"
Detected 2 ports/0 drives. Override # of ports or ENTER to accept <2>

Recommended settings:
SataPortMap=22
DiskIdxMap=0002

Should i update the user_config.json with these values ? [Yy/Nn] y
Done.


DSM PAT file pre-downloading in progress...
https://global.download.synology.com/download/DSM/release/7.1/42661-1/DSM_DS920+_42661.pat
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  364M  100  364M    0     0  29.0M      0  0:00:12  0:00:12 --:--:-- 29.5M
Pat file  sha256sum is : 8076950fdad2ca58ea9b91a12584b9262830fe627794a0c4fc5861f819095261
verifyid  sha256sum is : 8076950fdad2ca58ea9b91a12584b9262830fe627794a0c4fc5861f819095261
pat file sha256sum is OK !

Loader Building in progress...

Rploader Version : 0.7.1.8
Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : develop
Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master
Extensions :   redpill-dtb
  redpill-misc
Extensions URL : "https://github.com/pocopico/redpill-load/raw/master/redpill-dtb/rpext-index.json",
"https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json"
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.apollolake-7.0.dev.txz/download
TOOLKIT_SHA : d349fa644392d4cfab8191243ee38aaa32bd517208c144678e0c855cb5a619ea
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/apollolake-source/linux-4.4.x.txz/download
SYNOKERNEL_SHA : af815ee065775d2e569fd7176e25c8ba7ee17a03361557975c8e5a4b64230c5b
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : geminilake
TARGET_VERSION    : 7.1.0
TARGET_REVISION : 42661
REDPILL_LKM_MAKE_TARGET : test-v7
KERNEL_MAJOR : 4
MODULE_ALIAS_FILE :  modules.alias.4.json
SYNOMODEL : ds920p_42661
MODEL : DS920+
Local Cache Folder : /mnt/sdc3/auxfiles
DATE Internet : 02062022 Local : 02062022
Checking Internet Access -> OK
Cloning into 'redpill-lkm'...
remote: Enumerating objects: 1253, done.
remote: Counting objects: 100% (325/325), done.
remote: Compressing objects: 100% (41/41), done.
remote: Total 1253 (delta 302), reused 284 (delta 283), pack-reused 928
Receiving objects: 100% (1253/1253), 469.84 KiB | 8.54 MiB/s, done.
Resolving deltas: 100% (865/865), done.
Cloning into 'redpill-load'...
remote: Enumerating objects: 1998, done.
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 1998 (delta 0), reused 1 (delta 0), pack-reused 1994
Receiving objects: 100% (1998/1998), 114.70 MiB | 23.10 MiB/s, done.
Resolving deltas: 100% (940/940), done.
No extra build option or static specified, using default <static>
Using static compiled redpill extension
Removing any old redpill.ko modules
Looking for redpill for : ds920p_42661
Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-4.4.180plus-geminilake.tgz
Extracting module
Got redpill-linux-v4.4.180+.ko
Testing modules.alias.4.json -> File OK
------------------------------------------------------------------------------------------------
It looks that you will need the following modules :


Found VGA Controller : pciid 8086d00003184  Required Extension : i915
Searching for matching extension for i915
Found SATA Controller : pciid 8086d000031e3  Required Extension :
No matching extension
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== pocopico.igb ==========================================
[#] Extension name: igb
[#] Description: Adds Intel(R) Gigabit Ethernet Network Driver Support
[#] To get help visit: <todo>
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/igb
[#] Software author: https://github.com/pocopico
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

Found Ethernet Interface : pciid 8086d000010c9 Required Extension : igb
Searching for matching extension for igb
Found matching extension :
"https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json"
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%

[!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.igb/pocopico.igb.json). For more info use "ext-manager.sh info pocopico.igb"

*** Process will exit ***
Found Ethernet Interface : pciid 8086d000010c9 Required Extension : igb
Searching for matching extension for igb
Found matching extension :
"https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json"
Found SATA Controller : pciid 1b21d00000612  Required Extension : ahci
Searching for matching extension for ahci
------------------------------------------------------------------------------------------------
Starting loader creation
Found tinycore cache folder, linking to home/tc/custom-module
Checking user_config.json : Done
Entering redpill-load directory
Removing bundled exts directories
Cache directory OK
Found build request for revision greater than 42218
Found extractor locally cached
Copying required libraries to local lib directory
Linking lib to lib64
Copying executable
Removing temp folder /tmp/synoesp
Checking if tool is accessible
/bin/syno_extract_system_patch: /usr/local/lib/libcurl.so.4: no version information available (required by /bin/syno_extract_system_patch)
Executed succesfully
Creating temp folder /tmp/pat
Checking for cached pat file
Found tinycore cache folder, linking to home/tc/custom-module
Found locally cached pat file /home/tc/custom-module/ds920p_42661.pat
File /home/tc/custom-module/ds920p_42661.pat, is  encrypted
Extracting encrypted pat file : /home/tc/custom-module/ds920p_42661.pat to /tmp/pat
/bin/syno_extract_system_patch: /usr/local/lib/libcurl.so.4: no version information available (required by /bin/syno_extract_system_patch)
Creating unecrypted pat file ds920p_42661.pat to /home/tc/redpill-load/cache folder
./VERSION
Pat file  sha256sum is : b994a0e083e89000848093f699020b3bb184e7997282da446d13816321941906
Checking config file existence -> OK
Editing config file -> Verifying config file -> OK !
Clearing temp folders
Processing add_extensions entries found on custom_config.json file :   redpill-dtb
  redpill-misc
Adding extension "https://github.com/pocopico/redpill-load/raw/master/redpill-dtb/rpext-index.json",
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/pocopico/redpill-load/raw/master/redpill-dtb/rpext-index.json...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/master/redpill-dtb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== redpill-dtb ==========================================
[#] Extension name: Device tree binary
[#] Description: Create your own device tree binary
[#] To get help visit: https://github.com/jumkey/redpill-load/raw/develop/redpill-dtb
[#] Extension preparer/packer: https://github.com/jumkey/redpill-load/raw/develop/redpill-dtb
[#] Software author: https://github.com/jumkey/redpill-load/raw/develop/redpill-dtb
[#] Update URL: https://github.com/pocopico/redpill-load/raw/master/redpill-dtb/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds920p_42661 ds1621p_42661 ds2422p_42661 ds2422p_42218 ds920p_42218 ds920p_42621 ds920p_42550 ds2422p_42621 ds1621p_42621
[#] =======================================================================================

Adding extension "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json"
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== redpill-misc ==========================================
[#] Extension name: Misc shell
[#] Description: Misc shell
[#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Update URL: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

Updating extension : redpill-dtb contents for model : ds920p_42661
[#] Checking runtime for required tools... [OK]
[#] Updating ds920p_42661 platforms extensions...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%

[#] Filling-in newly downloaded recipe for extension redpill-dtb platform ds920p_42661
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb/releases/install_rd.sh to /home/tc/redpill-load/custom/extensions/redpill-dtb/ds920p_42661/install_rd.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-dtb/ds920p_42661/install_rd.sh file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb/releases/install.sh to /home/tc/redpill-load/custom/extensions/redpill-dtb/ds920p_42661/install.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-dtb/ds920p_42661/install.sh file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb/releases/dtc to /home/tc/redpill-load/custom/extensions/redpill-dtb/ds920p_42661/dtc
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-dtb/ds920p_42661/dtc file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb/releases/patch.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-dtb/ds920p_42661/patch.tar.gz
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-dtb/ds920p_42661/patch.tar.gz file...  [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-dtb/ds920p_42661/patch.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-dtb/ds920p_42661/...  [OK]
[#] Successfully processed recipe for extension redpill-dtb platform ds920p_42661
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-dtb/ds920p_42661/patch.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-dtb/ds920p_42661/...  [OK]
Updating extension : redpill-misc contents for model : ds920p_42661
[#] Checking runtime for required tools... [OK]
[#] Updating ds920p_42661 platforms extensions...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%

[#] Filling-in newly downloaded recipe for extension redpill-misc platform ds920p_42661
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/install.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/install.sh file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install-all.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/install-all.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/install-all.sh file...  [OK]
[#] Downloading remote file https://github.com/tsl0922/ttyd/releases/download/1.6.3/ttyd.x86_64 to /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/ttyd
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/ttyd file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install_rd.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/install_rd.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/install_rd.sh file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/lrzsz.tar.gz
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/lrzsz.tar.gz file...  [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/...  [OK]
[#] Successfully processed recipe for extension redpill-misc platform ds920p_42661
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds920p_42661/...  [OK]
[#] Checking runtime for required tools... [OK]
[#] Updating extensions...

[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json...
[#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== redpill-boot-wait ==========================================
[#] Extension name: RedPill Bootwait
[#] Description: Simple extension which stops the execution early waiting for the boot device to appear
[#] To get help visit: https://github.com/pocopico/rp-ext/redpill-boot-wait
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/redpill-boot-wait
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds2422p_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds920p_42550 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

[#] Checking runtime for required tools... [OK]
[#] Updating pocopico.igb extension...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%

[#] Extension pocopico.igb index is already up to date
[#] Updating redpill-boot-wait extension...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%

[#] Extension redpill-boot-wait index is already up to date
[#] Updating redpill-dtb extension...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/master/redpill-dtb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%

[#] Extension redpill-dtb index is already up to date
[#] Updating redpill-misc extension...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] Checking runtime for required tools... [OK]
[#] Updating ds920p_42661 platforms extensions...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/releases/ds920p_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%

[#] Filling-in newly downloaded recipe for extension pocopico.igb platform ds920p_42661
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/releases/igb-4.4.180plus-geminilake.tgz to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds920p_42661/igb-4.4.180plus-geminilake.tgz
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.igb/ds920p_42661/igb-4.4.180plus-geminilake.tgz file... [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.igb/ds920p_42661/igb-4.4.180plus-geminilake.tgz to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds920p_42661/... [OK]
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/src/check-igb.sh to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds920p_42661/check-igb.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.igb/ds920p_42661/check-igb.sh file... [OK]
[#] Successfully processed recipe for extension pocopico.igb platform ds920p_42661
[#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%
[#] Filling-in newly downloaded recipe for extension redpill-boot-wait platform ds920p_42661
[#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds920p_42661/boot-wait.sh
######################################################################## 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds920p_42661/boot-wait.sh file... [OK]
[#] Successfully processed recipe for extension redpill-boot-wait platform ds920p_42661
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-dtb/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%
[#] Extension redpill-dtb for ds920p_42661 platform is already up to date
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################## 100.0%
[#] Extension redpill-misc for ds920p_42661 platform is already up to date
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds920p_42661/boot-wait.sh file... [OK]
[#] Updating extensions... [OK]
[#] Verifying /home/tc/redpill-load/cache/ds920p_42661.pat file... [OK]
[#] Unpacking /home/tc/redpill-load/cache/ds920p_42661.pat file to /home/tc/redpill-load/build/1654179665/pat-ds920p_42661-unpacked... [OK]
[#] Verifying /home/tc/redpill-load/build/1654179665/pat-ds920p_42661-unpacked/zImage file... [OK]
[#] Patching /home/tc/redpill-load/build/1654179665/pat-ds920p_42661-unpacked/zImage to /home/tc/redpill-load/build/1654179665/zImage-patched... [OK]
[#] Verifying /home/tc/redpill-load/build/1654179665/pat-ds920p_42661-unpacked/rd.gz file... [OK]
[#] Unpacking /home/tc/redpill-load/build/1654179665/pat-ds920p_42661-unpacked/rd.gz file to /home/tc/redpill-load/build/1654179665/rd-ds920p_42661-unpacked... [OK]
[#] Apply patches to /home/tc/redpill-load/build/1654179665/rd-ds920p_42661-unpacked... [OK]
[#] Patching config files in ramdisk... [OK]
[#] Adding OS config patching... [OK]
[#] Repacking ramdisk to /home/tc/redpill-load/build/1654179665/rd-patched-ds920p_42661.gz... [OK]
[#] Bundling extensions... [#] Checking runtime for required tools... [OK]
[#] Dumping ds920p_42661 platform extensions to /home/tc/redpill-load/build/1654179665/custom-initrd/exts... [OK]
[#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1654179665/custom.gz... [OK]
[#] Generating GRUB config... [OK]
[#] Creating loader image at loader.img... [OK]
[#] Cleaning up... [OK]
Mounting /dev/sdc1 to localdiskp1
/dev/sdc2 localdiskp2
Creating tinycore entry
menuentry 'Tiny Core Image Build' {
        savedefault
        set root=(hd0,msdos3)
        echo Loading Linux...
        linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791
        echo Loading initramfs...
        initrd /corepure64.gz
        echo Booting TinyCore for loader creation
}
Entries in Localdisk bootloader :
=======================================================================
menuentry 'RedPill DS920+ v7.1.0-42661 (USB, Verbose)' {
menuentry 'RedPill DS920+ v7.1.0-42661 (SATA, Verbose)' {
menuentry 'Tiny Core Image Build' {
Caching files for future use
Found /home/tc/redpill-load/cache/ds920p_42661.pat, copying to cache directory : /mnt/sdc3/auxfiles
Saving user session for future use. Saving current extensions  -> OK !
Saving current user_config.json  -> OK !

Backup in progress...

Clearing local redpill files
Please make sure you are using the latest 1GB img before using backup option
Current /home/tc size is 2.3M , try to keep it less than 1GB as it might not fit into your image
Should i update the sdc with your current files [Yy/Nn]
Backing up home files to sdc : Backing up files to /mnt/sdc3//mydata.tgz
Done.

tc@box:~$ sudo reboot
tc@box:~$

 

26 minutes ago, Peter Suh said:

 

It is not applicable to ds920+ or ds1621+ using dtc, but hot plug can be used as important in other models.
You say you couldn't find it in the bios, but the specifications of the motherboard say it is like the capture below.

 

https://www.asrock.com/mb/Intel/J5040-ITX/index.asp#Specification

 

스크린샷 2022-06-02 오후 11.01.48.png

 

Link to comment
Share on other sites

SynologyNAS> cat /var/log/*rc* 
START /linuxrc.syno.impl
'/etc.defaults/model.dtb' -> '/var/run/model.dtb'
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module xhci-pci ... [  OK  ]
:: Loading module usb-storage ... [  OK  ]
:: Loading kernel modules from extensions ...
Loading kmod #0 "igb.ko" for pocopico.igb (args: )
:: Loading kernel modules from extensions ... [  OK  ]
:: Executing "on_boot" custom scripts ...
Running "check-igb.sh" for pocopico.igb->on_boot
Loading module igb -> Module igb loaded succesfully
Ran "check-igb.sh" for pocopico.igb->on_boot - exit=0
Running "boot-wait.sh" for redpill-boot-wait->on_boot
Still waiting for boot device (waited 1 of 30 seconds)
Still waiting for boot device (waited 2 of 30 seconds)
Still waiting for boot device (waited 3 of 30 seconds)
Still waiting for boot device (waited 4 of 30 seconds)
Confirmed a valid-looking /dev/synoboot device
Ran "boot-wait.sh" for redpill-boot-wait->on_boot - exit=0
Running "install_rd.sh" for redpill-dtb->on_boot
output.dts: Warning (unit_address_vs_reg): /DX517/pmp_slot@1: node has a unit name, but no reg or ranges property
output.dts: Warning (unit_address_vs_reg): /DX517/pmp_slot@2: node has a unit name, but no reg or ranges property
output.dts: Warning (unit_address_vs_reg): /DX517/pmp_slot@3: node has a unit name, but no reg or ranges property
output.dts: Warning (unit_address_vs_reg): /DX517/pmp_slot@4: node has a unit name, but no reg or ranges property
output.dts: Warning (unit_address_vs_reg): /DX517/pmp_slot@5: node has a unit name, but no reg or ranges property
output.dts: Warning (unit_address_vs_reg): /internal_slot@1: node has a unit name, but no reg or ranges property
output.dts: Warning (unit_address_vs_reg): /internal_slot@2: node has a unit name, but no reg or ranges property
output.dts: Warning (unit_address_vs_reg): /internal_slot@3: node has a unit name, but no reg or ranges property
output.dts: Warning (unit_address_vs_reg): /internal_slot@4: node has a unit name, but no reg or ranges property
output.dts: Warning (unit_address_vs_reg): /esata_port@1: node has a unit name, but no reg or ranges property
output.dts: Warning (unit_address_vs_reg): /usb_slot@1: node has a unit name, but no reg or ranges property
output.dts: Warning (unit_address_vs_reg): /usb_slot@2: node has a unit name, but no reg or ranges property
output.dts: Warning (unit_address_vs_reg): /nvme_slot@1: node has a unit name, but no reg or ranges property
output.dts: Warning (unit_address_vs_reg): /nvme_slot@2: node has a unit name, but no reg or ranges property
ata_port_no = 0
driver = ahci
pciepath = 00:12.0
modify path /internal_slot@1/ahci/pcie_root
[ok] value "00:12.0"
modify path /internal_slot@1/ahci/ata_port
[ok] value <0x00>
/sys/block/sata1
ata_port_no = 1
driver = ahci
pciepath = 00:12.0
modify path /internal_slot@2/ahci/pcie_root
[ok] value "00:12.0"
modify path /internal_slot@2/ahci/ata_port
[ok] value <0x01>
/sys/block/sata2
output.dts.out:14.14-19.5: Warning (unit_address_vs_reg): /DX517/pmp_slot@1: node has a unit name, but no reg or ranges property
output.dts.out:20.14-25.5: Warning (unit_address_vs_reg): /DX517/pmp_slot@2: node has a unit name, but no reg or ranges property
output.dts.out:26.14-31.5: Warning (unit_address_vs_reg): /DX517/pmp_slot@3: node has a unit name, but no reg or ranges property
output.dts.out:32.14-37.5: Warning (unit_address_vs_reg): /DX517/pmp_slot@4: node has a unit name, but no reg or ranges property
output.dts.out:38.14-43.5: Warning (unit_address_vs_reg): /DX517/pmp_slot@5: node has a unit name, but no reg or ranges property
output.dts.out:45.18-60.4: Warning (unit_address_vs_reg): /internal_slot@1: node has a unit name, but no reg or ranges property
output.dts.out:61.18-76.4: Warning (unit_address_vs_reg): /internal_slot@2: node has a unit name, but no reg or ranges property
output.dts.out:77.18-92.4: Warning (unit_address_vs_reg): /internal_slot@3: node has a unit name, but no reg or ranges property
output.dts.out:93.18-108.4: Warning (unit_address_vs_reg): /internal_slot@4: node has a unit name, but no reg or ranges property
output.dts.out:109.15-114.4: Warning (unit_address_vs_reg): /esata_port@1: node has a unit name, but no reg or ranges property
output.dts.out:115.13-125.4: Warning (unit_address_vs_reg): /usb_slot@1: node has a unit name, but no reg or ranges property
output.dts.out:126.13-136.4: Warning (unit_address_vs_reg): /usb_slot@2: node has a unit name, but no reg or ranges property
output.dts.out:137.14-140.4: Warning (unit_address_vs_reg): /nvme_slot@1: node has a unit name, but no reg or ranges property
output.dts.out:141.14-144.4: Warning (unit_address_vs_reg): /nvme_slot@2: node has a unit name, but no reg or ranges property
'model_r2.dtb' -> '/etc.defaults/model.dtb'
'model_r2.dtb' -> '/var/run/model.dtb'
Ran "install_rd.sh" for redpill-dtb->on_boot - exit=0
Running "install_rd.sh" for redpill-misc->on_boot
Starting ttyd, listening on port: 7681
Ran "install_rd.sh" for redpill-misc->on_boot - exit=0
:: Executing "on_boot" custom scripts ... [  OK  ]
Extensions processed
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
Insert synorbd kernel module
Insert synofsbd kernel module
Insert sha256 kernel module
Assemble args: -u 44051026:eaf47c34:05d949f7:b0bbaec7 /dev/sata1p1 /dev/sata2p1
mdadm: /dev/md0 has been started with 2 drives (out of 16).
Partition Version=8
 /sbin/e2fsck exists, checking /dev/md0... 
e2fsck 1.44.1 (24-Mar-2018)
/sbin/e2fsck -yvf returns 0
Mounting /dev/md0 /tmpRoot
------------upgrade
Begin upgrade procedure
Failed to found any patch
No upgrade file found
============upgrade
------------bootup-smallupdate
Failed to AssertFileKeyValueEqual
  value1: /etc.defaults/VERSION:smallfixnumber -> 0
  value2: /tmpRoot/.syno/patch/VERSION:smallfixnumber => 2
Skip bootup smallupdate, because root is not matched to junior
============bootup-smallupdate
Failed to AssertFileKeyValueEqual
  value1: /etc.defaults/VERSION:smallfixnumber -> 0
  value2: /tmpRoot/.syno/patch/VERSION:smallfixnumber => 2
Exit on error [7] root not matched with junior...
Thu Jun  2 14:39:06 UTC 2022
/dev/md0 /tmpRoot ext4 rw,relatime,prjquota,rootprjquota,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
SynologyNAS> ls -l /sys/block
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 loop0 -> ../devices/virtual/block/loop0
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 loop1 -> ../devices/virtual/block/loop1
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 loop2 -> ../devices/virtual/block/loop2
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 loop3 -> ../devices/virtual/block/loop3
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 loop4 -> ../devices/virtual/block/loop4
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 loop5 -> ../devices/virtual/block/loop5
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 loop6 -> ../devices/virtual/block/loop6
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 loop7 -> ../devices/virtual/block/loop7
lrwxrwxrwx    1 root     root             0 Jun  2 14:39 md0 -> ../devices/virtual/block/md0
lrwxrwxrwx    1 root     root             0 Jun  2 14:39 md1 -> ../devices/virtual/block/md1
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram0 -> ../devices/virtual/block/ram0
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram1 -> ../devices/virtual/block/ram1
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram10 -> ../devices/virtual/block/ram10
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram11 -> ../devices/virtual/block/ram11
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram12 -> ../devices/virtual/block/ram12
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram13 -> ../devices/virtual/block/ram13
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram14 -> ../devices/virtual/block/ram14
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram15 -> ../devices/virtual/block/ram15
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram2 -> ../devices/virtual/block/ram2
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram3 -> ../devices/virtual/block/ram3
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram4 -> ../devices/virtual/block/ram4
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram5 -> ../devices/virtual/block/ram5
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram6 -> ../devices/virtual/block/ram6
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram7 -> ../devices/virtual/block/ram7
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram8 -> ../devices/virtual/block/ram8
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 ram9 -> ../devices/virtual/block/ram9
lrwxrwxrwx    1 root     root             0 Jun  2 14:39 sata1 -> ../devices/pci0000:00/0000:00:12.0/ata1/host0/target0:0:0/0:0:0:0/block/sata1
lrwxrwxrwx    1 root     root             0 Jun  2 14:39 sata2 -> ../devices/pci0000:00/0000:00:12.0/ata2/host1/target1:0:0/1:0:0:0/block/sata2
lrwxrwxrwx    1 root     root             0 Jun  2 14:41 synoboot -> ../devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7:1.0/host4/target4:0:0/4:0:0:0/block/synoboot
SynologyNAS> 

the log from the diskstation

 

 

Link to comment
Share on other sites

------------bootup-smallupdate
Failed to AssertFileKeyValueEqual
  value1: /etc.defaults/VERSION:smallfixnumber -> 0
  value2: /tmpRoot/.syno/patch/VERSION:smallfixnumber => 2
Skip bootup smallupdate, because root is not matched to junior
============bootup-smallupdate

@Doerk32 It looks that at some point you performed an update from 7.1 u1 -> 7.1 u2 ?  

 

the /tmpRoot (root that is on your DISKS includes smallfixnumber 2 (update2) and the junior (loader ramdisk) has smallfixnumber 0 (  7.1 42661)

 

You will have to perform a series of steps through tinycore ... 

Link to comment
Share on other sites

29 minutes ago, pocopico said:

------------bootup-smallupdate
Failed to AssertFileKeyValueEqual
  value1: /etc.defaults/VERSION:smallfixnumber -> 0
  value2: /tmpRoot/.syno/patch/VERSION:smallfixnumber => 2
Skip bootup smallupdate, because root is not matched to junior
============bootup-smallupdate

@Doerk32 It looks that at some point you performed an update from 7.1 u1 -> 7.1 u2 ?  

 

the /tmpRoot (root that is on your DISKS includes smallfixnumber 2 (update2) and the junior (loader ramdisk) has smallfixnumber 0 (  7.1 42661)

 

You will have to perform a series of steps through tinycore ... 

 i don`t know what can i do now how can i don

Link to comment
Share on other sites

1 minute ago, Doerk32 said:

 i don`t know what can i do now how can i don

 

if your smallfixnumber of rd.gz does not match the one on your root of the disks you will loop in recovery mode.

 

Dont panic though, I need to verify a few things and i'll get back to you.

  • Thanks 1
Link to comment
Share on other sites

As analyzed by @pocopico, recovery mode will be repeated indefinitely with only the loader for DSM 7.1.0-42661 update1 prepared in the build above.
It seems that your HDD's system partition has already applied DSM 7.1.0-42661 update2, and @pocopico will give you a solution to solve this.
Please wait a little.

  • Like 1
Link to comment
Share on other sites

11 час назад, pocopico сказал:

You will have to perform a series of steps through tinycore ... 

write a solution to the problem in this topic. I have the same problem. Thank you very much.

Link to comment
Share on other sites

Posted (edited)

OK, i've performed exactly the same on my testbed VM and i ended up in the same situation. But there is a solution ->

 

image.thumb.png.da5c902e22ab795bd43d6f578ebe539c.png

 

The temporary fix for that would be to select tinycore boot option again and boot into TCRP.

 

then copy paste the following in a terminal : 

 

#!/bin/bash

#

# Temp fix for update2

 

loaderdisk="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)"

 

cd /home/tc

 

mkdir /home/tc/ramdisk

 

sudo mount /dev/${loaderdisk}1

sudo mount /dev/${loaderdisk}2

 

cd ramdisk

 

unlzma -c /mnt/${loaderdisk}2/rd.gz | cpio -idm

cat /mnt/${loaderdisk}1/rd.gz | cpio -idm

 

find . 2>/dev/null | cpio -o -H newc -R root:root | xz -9 --format=lzma >../rd.gz

 

cd ..

 

# add fake sign

dd if=/dev/zero of=rd.gz bs=68 count=1 conv=notrunc oflag=append

 

sudo cp -f rd.gz /mnt/${loaderdisk}1/rd.gz

 

rm -rf ramdisk

 

echo "Done"


 


###################################################

 

 

The update2 pat file payload includes also a kernel image but we are OK without it.

 

Edited by pocopico
  • Like 2
Link to comment
Share on other sites

32 minutes ago, pocopico said:

OK, i've performed exactly the same on my testbed VM and i ended up in the same situation. But there is a solution ->

 

image.thumb.png.da5c902e22ab795bd43d6f578ebe539c.png

 

The temporary fix for that would be to select tinycore boot option again and boot into TCRP.

 

then copy paste the following in a terminal : 

 

#!/bin/bash

#

# Temp fix for update2

 

loaderdisk="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)"

 

cd /home/tc

 

mkdir /home/tc/ramdisk

 

sudo mount /dev/${loaderdisk}1

sudo mount /dev/${loaderdisk}2

 

cd ramdisk

 

unlzma -c /mnt/${loaderdisk}2/rd.gz | cpio -idm

cat /mnt/${loaderdisk}1/rd.gz | cpio -idm

 

find . 2>/dev/null | cpio -o -H newc -R root:root | xz -9 --format=lzma >../rd.gz

 

cd ..

 

# add fake sign

dd if=/dev/zero of=rd.gz bs=68 count=1 conv=notrunc oflag=append

 

sudo cp -f rd.gz /mnt/${loaderdisk}1/rd.gz

 

rm -rf ramdisk

 

echo "Done"


 


###################################################

 

 

The update2 pat file payload includes also a kernel image but we are OK without it.

 

it work on my tesssystem

thank you very much

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...