Spats Posted May 9, 2022 Share #26 Posted May 9, 2022 Guys / gals got an Asus Prime Z270-P m/b i5 processor intel X520-2 10gbe intel 1gbe I am using tcrp 0.4.6 img tried with eufi img as well, but I cannot get an ip when trying to setup with empty drives for testing on baremetal. I have 6.2.3 working on same machine its working great. (baremetal) when i type ifconfig i get no ip address at all, any ideas guys cheers Quote Link to comment Share on other sites More sharing options...
0 Peter Suh Posted May 11, 2022 Share #27 Posted May 11, 2022 1 minute ago, Spats said: router does not give an ip when the 10gb nic is in mate By the way, did the build work success? Quote Link to comment Share on other sites More sharing options...
0 Peter Suh Posted May 11, 2022 Share #28 Posted May 11, 2022 At first, they said there was an intel 1gb nic Eventually, you can see RealTek 1gb nic Which of the two is correct? Quote Link to comment Share on other sites More sharing options...
0 Spats Posted May 11, 2022 Author Share #29 Posted May 11, 2022 i haven't tested when you gave the commands mate Quote Link to comment Share on other sites More sharing options...
0 Spats Posted May 11, 2022 Author Share #30 Posted May 11, 2022 1 minute ago, Peter Suh said: At first, they said there was an intel 1gb nic Eventually, you can see RealTek 1gb nic Which of the two is correct? yes its an intel 1gb internal nic for pc. the intel 10gb nic is an addon hence the reason for the 3 macs in the grub.cfg in 6.2.3 Quote Link to comment Share on other sites More sharing options...
0 Peter Suh Posted May 11, 2022 Share #31 Posted May 11, 2022 RealTek must be a built-in NIC Anyway, it is fortunate that igb ext was not added automatically. If igb is added in duplicate with ixgbe, igb interferes with ixgbe ext's operation. Quote Link to comment Share on other sites More sharing options...
0 Peter Suh Posted May 11, 2022 Share #32 Posted May 11, 2022 Then, RealTek may be an ext that was added separately for your other test or other reasons. Anyway, I'll forget about RealTek from now on. Quote Link to comment Share on other sites More sharing options...
0 Peter Suh Posted May 11, 2022 Share #33 Posted May 11, 2022 I will share the issue of my friend who experienced a similar phenomenon with you. Read it once. https://github.com/pocopico/rp-ext/issues/103 Quote Link to comment Share on other sites More sharing options...
0 Spats Posted May 11, 2022 Author Share #34 Posted May 11, 2022 1 minute ago, Peter Suh said: Then, RealTek may be an ext that was added separately for your other test or other reasons. Anyway, I'll forget about RealTek from now on. so your saying that the 10gb nic will not function with 7.1 Quote Link to comment Share on other sites More sharing options...
0 Peter Suh Posted May 11, 2022 Share #35 Posted May 11, 2022 (edited) 3 minutes ago, Spats said: so your saying that the 10gb nic will not function with 7.1 If you look at the issue right above, the igb and ixgbe collide. At first, IP seemed to be being caught, but later, IP disappeared. Edited May 11, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
0 Peter Suh Posted May 11, 2022 Share #36 Posted May 11, 2022 That is not to say that it does not work in 7.1. Intel x520 10GB NICs should add ext properly and well to avoid collisions with existing 1GB LAN cards. I'm still guiding that part. Quote Link to comment Share on other sites More sharing options...
0 Spats Posted May 11, 2022 Author Share #37 Posted May 11, 2022 2 minutes ago, Peter Suh said: If you look at the issue right above, the igb and ixgbe collide. At first, IP seemed to be being caught, but later, IP disappeared. what i can do is disable the onboard lan and see if it picks up the 10gb nic Quote Link to comment Share on other sites More sharing options...
0 Peter Suh Posted May 11, 2022 Share #38 Posted May 11, 2022 1 minute ago, Spats said: what i can do is disable the onboard lan and see if it picks up the 10gb nic The igb driver is not added, so I don't think it will cause any problems That could be a good way, too. Quote Link to comment Share on other sites More sharing options...
0 Spats Posted May 11, 2022 Author Share #39 Posted May 11, 2022 1 minute ago, Peter Suh said: That is not to say that it does not work in 7.1. Intel x520 10GB NICs should add ext properly and well to avoid collisions with existing 1GB LAN cards. I'm still guiding that part. I know it takes time mate and thanks goes to you and the guys working behind the scenes to get things going, but i will perceiver and test myself as well mate Quote Link to comment Share on other sites More sharing options...
0 Peter Suh Posted May 11, 2022 Share #40 Posted May 11, 2022 Friend, it is 1 a.m. in Korea. I also have to go to work tomorrow, so I want to keep checking the rest of the problems during the day tomorrow. OK? Quote Link to comment Share on other sites More sharing options...
0 Spats Posted May 11, 2022 Author Share #41 Posted May 11, 2022 ok Peter thanks again for trying to get this to work much appreciated. give me a shout if you need to test anything. Quote Link to comment Share on other sites More sharing options...
0 pocopico Posted May 11, 2022 Share #42 Posted May 11, 2022 (edited) 1 hour ago, Peter Suh said: If you look at the issue right above, the igb and ixgbe collide. At first, IP seemed to be being caught, but later, IP disappeared. Well like i said many times before @Peter Suh, when you use my redpill-load repo on custom_config.json you should not have the module dependencies overlapping issue. In 918+ there is no vanilla DSM ixgbe module included. You will have to add the ixgbe and ixgbevf extensions. The reason that you dont get an IP for these interfaces is not certain that is an installation issue, we need to check some things. 1. DHCP server is running on your network. 2. Once you build the loader with the recommended extensions, make sure you have at least IP on 1Gb interfaces and boot DSM to check the logs : cat /var/log/jun* cat /var/log/linu* and check if modules are loaded. lsmod |grep -i ixg lsmod |grep -i ig then do : ip a If you get more that one network interface you are good to move to second step. (PM me) Edited May 11, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
0 Spats Posted May 11, 2022 Author Share #43 Posted May 11, 2022 (edited) login as: Spats Spats@192.168.1.xxx's password: Synology strongly advises you not to run commands as the root user, who has the highest privileges on the system. Doing so may cause major damages to the system. Please note that if you choose to proceed, all consequences are at your own risk. Spats@Andy:~$ cat /var/log/jun* cat: '/var/log/jun*': No such file or directory Spats@Andy:~$ sudo cat /var/log/jun* We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. Password: cat: '/var/log/jun*': No such file or directory Spats@Andy:~$ cat /var/log/linu* cat: '/var/log/linu*': No such file or directory Spats@Andy:~$ lsmod |grep -i ixg ixgbevf 60183 0 ixgbe 280488 0 vxlan 32687 1 ixgbe Spats@Andy:~$ lsmod |grep -i ig backlight 6155 2 i915,video igb 176108 0 Spats@Andy:~$ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:11:32:8f:b5:40 brd ff:ff:ff:ff:ff:ff inet 192.168.1.68/24 brd 192.168.1.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::211:32ff:fe8f:b540/64 scope link valid_lft forever preferred_lft forever 3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 link/sit 0.0.0.0 brd 0.0.0.0 Spats@Andy:~$ I dont have the 10gb card in yet, as i will not get an ip, will try again tho. Edited May 11, 2022 by Spats Quote Link to comment Share on other sites More sharing options...
0 Spats Posted May 11, 2022 Author Share #44 Posted May 11, 2022 This is the full build with the 10gb Nic card installed. cheers guys TCRP_10gb build.txt Quote Link to comment Share on other sites More sharing options...
0 pocopico Posted May 11, 2022 Share #45 Posted May 11, 2022 (edited) 2 hours ago, Spats said: Spats@Andy:~$ lsmod |grep -i ixg ixgbevf 60183 0 ixgbe 280488 0 vxlan 32687 1 ixgbe Spats@Andy:~$ lsmod |grep -i ig backlight 6155 2 i915,video igb 176108 0 So ok, looks OK the modules were loaded even without rebuilding the loader. What happens when you boot ? also you dont have to rebuild the loader when you add or remove the 10G card, you can try with or without Edited May 11, 2022 by pocopico Quote Link to comment Share on other sites More sharing options...
0 Spats Posted May 11, 2022 Author Share #46 Posted May 11, 2022 21 minutes ago, pocopico said: So ok, looks OK the modules were loaded even without rebuilding the loader. What happens when you boot ? also you dont have to rebuild the loader when you add or remove the 10G card, you can try with or without When I boot without 10gb nic card installed I get an ip. When i boot with card installed I get no ip, even in the router. I rebuilt the loader with card installed in case there was something missing mate Quote Link to comment Share on other sites More sharing options...
0 pocopico Posted May 11, 2022 Share #47 Posted May 11, 2022 Do you have any serial console ? I think you might get kernel panic because of the ixgbe modules. Do you get any disk activity ? Quote Link to comment Share on other sites More sharing options...
0 Spats Posted May 11, 2022 Author Share #48 Posted May 11, 2022 5 minutes ago, pocopico said: Do you have any serial console ? I think you might get kernel panic because of the ixgbe modules. Do you get any disk activity ? No serial console, disk activity yes I get noise from hdd as its trying to boot, if that's what you mean mate Quote Link to comment Share on other sites More sharing options...
0 Spats Posted May 12, 2022 Author Share #49 Posted May 12, 2022 Waited for a good 30mins for an IP still nothing. is it possible to go the DS920+ route guys cheers Quote Link to comment Share on other sites More sharing options...
0 Spats Posted May 13, 2022 Author Share #50 Posted May 13, 2022 (edited) Thanks goes to @IG-88 for getting this sorted for me in the 6.2 build as the DS918+ only has 2 lan ports. edit synoinfo.conf located in /etc.defaults/synoinfo.conf maxlanport="2" I changed it to 8. Also edit /etc/synoinfo.conf maxlanport="2" I changed it to 8 Reboot you now have all mac addresses showing Thanks goes to Pocopico and Peter Suh for helping me trying to get this sorted. Edit: Now I got my 10gb NIC working. Edited May 13, 2022 by Spats Added more info. 2 Quote Link to comment Share on other sites More sharing options...
Question
Spats
Guys / gals
got an Asus Prime Z270-P m/b
i5 processor
intel X520-2 10gbe
intel 1gbe
I am using tcrp 0.4.6 img tried with eufi img as well, but I cannot get an ip when trying to setup with empty drives for testing on baremetal.
I have 6.2.3 working on same machine its working great. (baremetal)
when i type ifconfig i get no ip address at all, any ideas guys
cheers
Link to comment
Share on other sites
49 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.