ruffpl Posted February 6, 2016 #1 Posted February 6, 2016 Hi. Is there some aplication that can monitor S.M.A.R.T. or disk activity? I have hdds connected by pci sata controller (that support S.M.A.R.T.) but in DSM storage menagement it shows status of not supported/ only for 2 disks that are attached directly to mainboard I can view the S.M.A.R.T info.
brantje Posted February 6, 2016 #2 Posted February 6, 2016 Are the disks attached as normal disks? Posted via MyXpenology
pastrychef Posted February 6, 2016 #3 Posted February 6, 2016 I can see SMART status all the drives in my 8 drive array with my build.
ruffpl Posted February 6, 2016 Author #4 Posted February 6, 2016 Are the disks attached as normal disks? Posted via MyXpenology Yes. All of them as single volume ( non raid/shr)
sbv3000 Posted February 7, 2016 #5 Posted February 7, 2016 what brand/chipset is the add on controller?
ruffpl Posted February 9, 2016 Author #6 Posted February 9, 2016 It is IBM m1015 ( LSI SAS2008 6 Gbps RAID on Chip (ROC) controller)
sbv3000 Posted February 9, 2016 #7 Posted February 9, 2016 have you set the raid mode to 'IT (initiator target)/jbod/dumb etc (ie no hardware raid?), that generally allows 'pass through' of disk information.
ruffpl Posted February 11, 2016 Author #8 Posted February 11, 2016 How to do that ? I didnt create any volumes by controller OS ( everything is default) / only by DSM
ruffpl Posted February 11, 2016 Author #9 Posted February 11, 2016 I found some info but I have no idea how to get it work http://www.servethehome.com/ibm-serveraid-m1015-part-3-smart-passthrough-lsi-92208i/
sbv3000 Posted February 11, 2016 #10 Posted February 11, 2016 have a look at this on the same site, flashing to LSI firmware might help http://www.servethehome.com/ibm-serveraid-m1015-part-4/
Recommended Posts