Ollie_B_2000 Posted October 3, 2013 Share #26 Posted October 3, 2013 Hi Ollie, OHCI USB support is already included in the repack 4.2 v1.2 Regards! Possible breakthrough I've just found 2 images in my downloads and think I've possibly installed "DS3612xs_4.2-3211_x64_Microserver-20130612.img" instead of the 1.2 repack sitting next to it, is there anyway to check this? If it turns out I haven't installed the 1.2 version is there a way to update to this version or should I follow your instructions for OHCI support you posted towards the start of this thread? Reagards Quote Link to comment Share on other sites More sharing options...
totalnas Posted October 4, 2013 Author Share #27 Posted October 4, 2013 I've just found 2 images in my downloads and think I've possibly installed "DS3612xs_4.2-3211_x64_Microserver-20130612.img" instead of the 1.2 repack sitting next to it, is there anyway to check this? If it turns out I haven't installed the 1.2 version is there a way to update to this version or should I follow your instructions for OHCI support you posted towards the start of this thread? Hi, Change the USB pendrive for another one. Install in the new pendrive the 1.2 repack. After boot, you have the new version with OHCI support. Quote Link to comment Share on other sites More sharing options...
xman Posted October 8, 2013 Share #28 Posted October 8, 2013 Is it possible to replace grub by extlinux ? The goal would be to boot from the HD directly without having to leave a USB key into the PC. Is it similar tags "hw_model" and "vender" exist in extlinux? This version of grub can't boot from ext4 or large partition. extlinux can, but the syno model is not the good one. Quote Link to comment Share on other sites More sharing options...
Ollie_B_2000 Posted October 10, 2013 Share #29 Posted October 10, 2013 I've just found 2 images in my downloads and think I've possibly installed "DS3612xs_4.2-3211_x64_Microserver-20130612.img" instead of the 1.2 repack sitting next to it, is there anyway to check this? If it turns out I haven't installed the 1.2 version is there a way to update to this version or should I follow your instructions for OHCI support you posted towards the start of this thread? Hi, Change the USB pendrive for another one. Install in the new pendrive the 1.2 repack. After boot, you have the new version with OHCI support. So the changes I need take place on the boot USB as opposed to the .pat file or do I have to now do another step as I still don't seem to have OHCI support , is there a command I can run to check if it's working? Quote Link to comment Share on other sites More sharing options...
The Chief Posted April 10, 2023 Share #30 Posted April 10, 2023 В 27.06.2013 в 16:00, totalnas сказал: #3: DM-Mirror support for LVM2 physical relocation One of the most limited functionality in the DSM firmware is the lack of RAID/Volume modification tools. For example, after you create one SHR raid volume you can't move/relocate/decrease/etc. disks. Nevertheless, the Linux kernel has functions to relocate LVM extends. Moreover, you can reduce logical volumes using resize2fs and you have the full power to modify your RAID. All tools are included in the firmware (mdadm, lvm, resize2fs, etc.) except the modules to migrate a LVM extend: dm-mirror.ko Here the modules that you need (for DSM 3.2 kernel 3.2.30 x64): DM-LOG: http://pastebin.com/RaVVpqMb DM-REGION-HASH: http://pastebin.com/Dj1Z69xy DM-MIRROR: http://pastebin.com/Jc32M86g You only need to load them in this order to enable the PVMOVE command in the LVM tool: $ insmod /lib/modules/dm-log.ko $ insmod /lib/modules/dm-region-hash.ko $ insmod /lib/modules/dm-mirror.ko The command is "lvm pvmove", or you can create the symlink with "ln -s lvm /sbin/pvmove" Moreover, if you like to load these modules at boot create a simple script file in "/usr/syno/etc/rc.d/" to load them (for example, "S15LoadModules.sh"). With this great tool I administrate all my RAID/LVM volumes without any limitation! Can anyone provide these modules form DSM7 (7.1.1)? 1 Quote Link to comment Share on other sites More sharing options...
truemanager Posted July 16, 2023 Share #31 Posted July 16, 2023 On 4/10/2023 at 10:20 AM, The Chief said: Can anyone provide these modules form DSM7 (7.1.1)? Hi, You can found modules for 7.2 here And if you need for "other" platform, then ask developers to include my patch in the "stock" loaders. Regards. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.