snoopy78 Posted January 22, 2022 Share #326 Posted January 22, 2022 (edited) gleiches spielchen auch mit meiner PCIe NVMe SSD (welche in einem billigen China Adapter sitzt). hier die Erweiterung mit den PCIe...die NVMe wird als Drive erkannt und kann für Volumes verwendet werden. model.confmodel.conf tc@box:~$ lspci -vtnn -+-[0000:ff]-+-0b.0 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 [8086:6f81] | +-1e.4 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f9c] | +-1f.0 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f88] | \-1f.2 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f8a] \-[0000:00]-+-00.0 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2 [8086:6f00] +-01.0-[01]----00.0 Digital Devices GmbH Octopus DVB Adapter [dd01:0003] +-02.0-[02]--+-00.0 Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 0 [8086:6f50] | +-00.1 Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 1 [8086:6f51] | +-00.2 Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 2 [8086:6f52] | \-00.3 Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 3 [8086:6f53] +-03.0-[03]----00.0 Samsung Electronics Co Ltd Device [144d:a808] +-03.2-[04]----00.0 LSI Logic / Symbios Logic SAS3008 PCI-Express Fusion-MPT SAS-3 [1000:0097] +-05.0 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Map/VTd_Misc/System Management [8086:6f28] was ich noch nicht geschafft habe, ist die DD Karte für meine VM sichtbar zu machen.....ich werde dann mal die PCIe Steckplätze tauschen..und weiterschauen... ach ja....Bootup Time des Systems ca. 15 Min, bis WebGUI accessible... Edited January 22, 2022 by snoopy78 Quote Link to comment Share on other sites More sharing options...
snoopy78 Posted January 22, 2022 Share #327 Posted January 22, 2022 Update ...... nach weiteren Tests wird die NVMe PCIe aktuell nur als Cache erkannt.....ich schau Mal, dass ich ne QM2 Karte bekommen...dann geht es weiter... Leider habe ich es nicht geschafft die DD Cine V6 im Qnap als PCIe Gerät (lspci unter qnap ist ja grausig) zu sehen....kann Sie daher auch nicht an die VM (Win Server 2021) durchreichen...suche jetzt DVB-S2(x) Dual USB Tuner, die sollte ich ja durchreichen können... Quote Link to comment Share on other sites More sharing options...
VauRa Posted January 23, 2022 Share #328 Posted January 23, 2022 Mir ging es mit einer PCIe NVMe genauso. Sie geht dann nur als Cache. Aber die QM2 sollte gehen. Quote Link to comment Share on other sites More sharing options...
snoopy78 Posted January 23, 2022 Share #329 Posted January 23, 2022 4 minutes ago, VauRa said: Mir ging es mit einer PCIe NVMe genauso. Sie geht dann nur als Cache. Aber die QM2 sollte gehen. Ja....habe mir gestern Nacht bei Amazon ne QNAP QM2-4P-384 relativ günstig geschossen....werde es dann am Di/Mi testen... Quote Link to comment Share on other sites More sharing options...
snoopy78 Posted January 25, 2022 Share #330 Posted January 25, 2022 (edited) ok..ich kann bestätigen...mit den QNAP QM2 Karten funktionieren NVMe auch als Volume..^^ (hatte das Glück und den als WHD bei Amazon für unter 150€ bekommen) habe erst mal eine 1TB 970 Evo Plus als ein Volume eingebunden, die 2 TB Evo Plus kommt morgen.. Ich hab schlussendlich die Karte im unteren PCIe3x8 Slot verbaut uns so den PCIe3x16 für GraKa frei (die könnte ich ggfls. in VMs durchreichen)... DD Cine V6 SAT Karten ließen sich leider nicht durchreichen, so dass ich hier auf SAT>USB Boxen von Sundtek ausgewichen bin, da USB problemlos durchreichbar ist. ! Ich hatt als Basisvolume 2x Intenso 256GB m.2 SATA SSDs im RAID 1 genommen (da hier alle Docker Container, APPs und VMs liegen, leider ist die eine heute ausgestiegen. Werde die jetzt gegen WD RED m.2 SATA SSDs austauschen, bekommt Amazon halt den Intenso Schrott zurück... ! Ansonsten kann ich ganz zufrieden sein, der SAS HBA funktioniert ( 18TB HDD wurde erkannt, wird aber erst später, wenn ich fertig bin, eingeschoben) , die m.2 SATA Anschlüssen onBoard funktionieren, PCIe Slots funktionieren beide, USB funktioniert, RAM wird korrekt erkannt und angezeigt, CPU wird korrekt erkannt und angezeigt...einzig die Startzeit von ca. 15Minuten ist etwas lang, aber dieses System soll permanent laufen... Noch einmal Danke @ALL Edited January 25, 2022 by snoopy78 Quote Link to comment Share on other sites More sharing options...
VauRa Posted January 25, 2022 Share #331 Posted January 25, 2022 Der QM2 und Dein Aufbau sieht gut aus. Das läuft dann sicher gut mit den M2's Was hast Du bei dem LSI SAS für eine Config? Ein RAID oder Einzelplatten? Letztes konnte ich bei meinem SAS3108 gar nicht wählen (oder ich war zu blind dafür). Bei mir werden die Platten am SAS nicht erkannt. Es kann aber auch daran liegen das in der Backplane ein Expander sitzt. Von daher würde mich Deine Config im Controller sehr interessieren... Quote Link to comment Share on other sites More sharing options...
snoopy78 Posted January 25, 2022 Share #332 Posted January 25, 2022 (edited) 26 minutes ago, VauRa said: Der QM2 und Dein Aufbau sieht gut aus. Das läuft dann sicher gut mit den M2's Was hast Du bei dem LSI SAS für eine Config? Ein RAID oder Einzelplatten? Letztes konnte ich bei meinem SAS3108 gar nicht wählen (oder ich war zu blind dafür). Bei mir werden die Platten am SAS nicht erkannt. Es kann aber auch daran liegen das in der Backplane ein Expander sitzt. Von daher würde mich Deine Config im Controller sehr interessieren... wie ich schon schrieb, war mein HBA zuerst im IR Mode (Raid) geflasht....habe Ihn dann in den IT Mode (stink normaler HBA) geflasht ...somit sind die Platten ganz normal einzeln ansprechbar..die backplane sollte hier eigentlich egal sein...ich habe auch Systeme mit Backplane...und jetzt habe ich auch eine mini-Backplane drin Ich weiss, dass bei gebrauchten HBAs (HP, Dell,...wie sie alle heißen, aber im original LSI sind) gerne die IR Firmware drauf ist....bei Tante Google findet man viel dazu das habe ich hierzu genutzt.. https://forums.servethehome.com/index.php?threads/supermicro-onboard-lsi3008-from-ir-to-it-mode.19083/ habe das Gehäuse hier.. https://www.amazon.de/gp/product/B07TVTYCTV/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&th=1 das hat sogar Anschlüsse für nen 2. Controller je SAS Backplane..^^ ..habe extra mal für dich ne SSD schnell an den HBA angeklemmt... das steht dazu im DMESG " [ 2870.010878] ==== end ==== [ 3226.447484] mpt3sas_cm0: detecting: handle(0x0009), sas_address(0x44332211020 00000), phy(2) [ 3226.455927] mpt3sas_cm0: REPORT_LUNS: handle(0x0009), retries(0) [ 3226.697096] mpt3sas_cm0: TEST_UNIT_READY: handle(0x0009), lun(0) [ 3227.737680] mpt3sas_cm0: detecting: handle(0x0009), sas_address(0x44332211020 00000), phy(2) [ 3227.746126] mpt3sas_cm0: REPORT_LUNS: handle(0x0009), retries(0) [ 3227.752295] mpt3sas_cm0: TEST_UNIT_READY: handle(0x0009), lun(0) [ 3227.849042] Check proc_name[mpt3sas]. [ 3227.852791] scsi 8:0:0:0: Direct-Access ATA Crucial_CT750MX3 R011 PQ : 0 ANSI: 6 [ 3227.861251] scsi 8:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221102000000), phy(2), device_name(0x500a0751125fb747) [ 3227.871945] scsi 8:0:0:0: enclosure logical id(0x5d0509900005f2c8), slot(0) [ 3227.879061] scsi 8:0:0:0: enclosure level(0x0000), connector name( ) [ 3227.885886] scsi 8:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 3227.894667] scsi 8:0:0:0: serial_number( 1615125FB747) [ 3227.900484] scsi 8:0:0:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) [ 3227.908992] scsi 8:0:0:0: Serial Number: 1615125FB747 [ 3227.914899] Check proc_name[mpt3sas]. [ 3227.914908] Check proc_name[mpt3sas]. [ 3227.918636] Check proc_name[mpt3sas]. [ 3227.922413] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 3227.926087] Check proc_name[mpt3sas]. [ 3227.931526] end_device-8:0: mpt3sas_transport_port_add: added: handle(0x0009 ), sas_addr(0x4433221102000000) [ 3227.937107] sd 8:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 3227.976661] sd 8:0:0:0: [sdc] Write Protect is off [ 3227.981520] sd 8:0:0:0: [sdc] Mode Sense: 9b 00 10 08 [ 3227.982035] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supp orts DPO and FUA [ 3228.001012] sdc: sdc1 [ 3228.007980] sd 8:0:0:0: [sdc] Attached SCSI disk [ 3228.012668] Check proc_name[mpt3sas]. [ 3228.016397] Check proc_name[mpt3sas]. [ 3237.294305] ---- NAS_Disk_Hot_Add(enc_id=0, port_id=6) start. [ 3237.513059] ---- NAS_Disk_Hot_Add(enc_id=0, port_id=6) finished. [~] # " Edited January 25, 2022 by snoopy78 Quote Link to comment Share on other sites More sharing options...
szararsiz Posted January 26, 2022 Share #333 Posted January 26, 2022 (edited) Hallo, Meine Muttersprache ist nicht Deutsch, ich schreibe mit Übersetzung, ich hoffe es ist verständlich. Zuerst habe ich den ganzen Titel gelesen und versucht, ihn zu verstehen. Ich habe Google Translate verwendet, da es nicht meine Muttersprache ist. Ich habe einen Hp Microserver Gen 10 Plus Xeon E-2224 CPU 48GB DDR4 RAM 1x256GB SSD 3x4TB WD Red HDD Server mit 4 SATA Anschlüssen und USB 3.2 Unterstützung. Jemand verwendet es als NAS Installation auf dieser Hardware? Wo soll ich anfangen? Außerdem sind die geteilten Informationen sehr wertvoll, vielen Dank an alle, die sie geteilt haben. Ich habe Google Translate verwendet, um auf Deutsch zu schreiben. Nochmals, ich entschuldige mich, wenn es irgendwelche falschen Aussagen gibt. Edited January 26, 2022 by szararsiz Quote Link to comment Share on other sites More sharing options...
snoopy78 Posted January 26, 2022 Share #334 Posted January 26, 2022 at First create the Boot Stick with the Image Herr in this Forum, then start from it, Switch into tinycore Linux, Check the commands to read out the correct values and then modify the model.conf you created by the script...... The most hard part is to correct read and modify the values... Quote Link to comment Share on other sites More sharing options...
VauRa Posted January 26, 2022 Share #335 Posted January 26, 2022 (edited) @snoopy78Danke für die Infos. Mit dem SAS3108 schein es nicht ganz so einfach zu sein. Er lässt sich wohl nicht mit einer IT-Firmware flashen (sagen die Freaks ). Dafür hat er einen "Personality Mode" mit/ohne JBOD dessen Funktion ich noch nicht voll verstanden habe. Aber in allen Konstellationen sagt my_create_qnap_boot bisher das es keinen Disk-Controller findet. Und auch mit den passenden Einträgen bei den System Disks geht nichts. Ich teste weiter... Edited January 26, 2022 by VauRa Quote Link to comment Share on other sites More sharing options...
snoopy78 Posted January 27, 2022 Share #336 Posted January 27, 2022 @VauRa der HBA sollte eigentlich immer im TINYCORE erkannt werden, solange er mpt3sas verwendet. Naja..JBOD klingt doch schon Mal richtig....hier ist es Just a Bunch Of Disks..also genau das, was du suchst... Ich habe gestern Nacht aber noch ein anderes Verhalten mit den SAS HBA gesehen, was ich später/die Tage verifizieren will.... So wie es aktuell aussieht erkennt das System physisch SSDs an weitern Ports, aber keine HDDs....auf werden erkannte SSD/HDD nicht zwingend in der WebGUI angezeigt... Quote Link to comment Share on other sites More sharing options...
SpencerDONG Posted January 29, 2022 Share #337 Posted January 29, 2022 On 1/27/2022 at 12:05 AM, szararsiz said: Hallo, Meine Muttersprache ist nicht Deutsch, ich schreibe mit Übersetzung, ich hoffe es ist verständlich. Zuerst habe ich den ganzen Titel gelesen und versucht, ihn zu verstehen. Ich habe Google Translate verwendet, da es nicht meine Muttersprache ist. Ich habe einen Hp Microserver Gen 10 Plus Xeon E-2224 CPU 48GB DDR4 RAM 1x256GB SSD 3x4TB WD Red HDD Server mit 4 SATA Anschlüssen und USB 3.2 Unterstützung. Jemand verwendet es als NAS Installation auf dieser Hardware? Wo soll ich anfangen? Außerdem sind die geteilten Informationen sehr wertvoll, vielen Dank an alle, die sie geteilt haben. Ich habe Google Translate verwendet, um auf Deutsch zu schreiben. Nochmals, ich entschuldige mich, wenn es irgendwelche falschen Aussagen gibt. I speak English. Lately I into flashing black qnap on pc. I am interested to learn and flash the boot disk on other platform. If you don't mind, drop me a pm with your telegram. I will guide you step by step sir. Quote Link to comment Share on other sites More sharing options...
snoopy78 Posted January 31, 2022 Share #338 Posted January 31, 2022 soo...habe jetzt ein interessantes Verhalten gefunden.... habe einen 8 Port HBA...und in meiner Model.conf auch die Zuordnung richtig drin.... wenn ich SSD/HDD einstecke, erkennt er jedoch nicht an allen Ports etwas in der WEBGUI....auf der CLI im Kernellog und per fdisk -l jedoch schon.... naja...ich kann noch 3 normale SSD/HDD einstecken + 2 NVMe....sollte also reichen..;) Wenn jemand einen EASY MOUSE card reader verwenden will..!! ACHTUNG !! im Normalzustand rebooted die Qnap, sobald der eingesteckt wird. (einfach mal danach bei goggle suchen, ist nen bekanntes verhalten..) => ich habe das bei mir so gelöst, dass ich bei der ERSTELLUNG des Boot-Images (also da, wo ich auch die model.conf erstelle/bearbeite) in der "create_udev_rule.sh" (glaube unter /etc/init.d/ ) den YEC Eintrag gelöscht habe. Dann kann ich die EasyMouse in Betrieb ohne Probleme einstecken, nur beim Booten sollte die nicht drin sein, da es sonst wieder als USV (status abnormal) erkannt wird und das System herunterfährt. Quote Link to comment Share on other sites More sharing options...
SpencerDONG Posted February 1, 2022 Share #339 Posted February 1, 2022 With the "year of the ox" iso, creating a boot up disk has never been easier. Also, it supports automatic firmware update. Quote Link to comment Share on other sites More sharing options...
snoopy78 Posted February 1, 2022 Share #340 Posted February 1, 2022 6 hours ago, SpencerDONG said: With the "year of the ox" iso, creating a boot up disk has never been easier. Also, it supports automatic firmware update. why you don't post the loader then, so we all can try and see..;) Quote Link to comment Share on other sites More sharing options...
SpencerDONG Posted February 1, 2022 Share #341 Posted February 1, 2022 51 minutes ago, snoopy78 said: why you don't post the loader then, so we all can try and see..;) Should I include a tutorial too? Quote Link to comment Share on other sites More sharing options...
snoopy78 Posted February 1, 2022 Share #342 Posted February 1, 2022 1 hour ago, SpencerDONG said: Should I include a tutorial too? thank you & yes, since we're here in a forum, it would be helpfull to have at least some basic information of how to proceed.....i currently also try to read the orignal post in here chinese forum but can't it's a bit hard to read sometimes..;) but a quick howto would also be nice for me too, since i'm not a programmer.... Quote Link to comment Share on other sites More sharing options...
alpha55 Posted February 1, 2022 Share #343 Posted February 1, 2022 Hello all, i saw this thread and decided to give to a try on installing qnap os on virtual machine (vmware). MODEL_TYPE="QZ601_Q0040_12_11" PATCHED_FIRMWARE="TS-X83XU_20200520-h4.5.0.1308" DOWNLOAD_URL="https://download.qnap.com/Storage/QuTShero/TS-X83XU/" i install all i can logon to web GUI without problems (as admin) but i can't create a pool storage, the system is read-only any suggestion ? Thank you Quote Link to comment Share on other sites More sharing options...
snoopy78 Posted February 1, 2022 Share #344 Posted February 1, 2022 1 minute ago, alpha55 said: Hello all, i saw this thread and decided to give to a try on installing qnap os on virtual machine (vmware). MODEL_TYPE="QZ601_Q0040_12_11" PATCHED_FIRMWARE="TS-X83XU_20200520-h4.5.0.1308" DOWNLOAD_URL="https://download.qnap.com/Storage/QuTShero/TS-X83XU/" i install all i can logon to web GUI without problems (as admin) but i can't create a pool storage, the system is read-only any suggestion ? Thank you try QTS and no QTS Hero....you need a license for QTS Hero...;) as it's written in your error message... check the posts above, there are plenty of different units stated... Quote Link to comment Share on other sites More sharing options...
alpha55 Posted February 1, 2022 Share #345 Posted February 1, 2022 Thank you very much , i reinstall and try with QTS Quote Link to comment Share on other sites More sharing options...
alpha55 Posted February 1, 2022 Share #346 Posted February 1, 2022 Hello again i installed this model QTS MODEL_TYPE="Q04M0_QY580_10_10" PATCHED_FIRMWARE="TS-X53D_20211223-4.5.4.1892" DOWNLOAD_URL="https://download.qnap.com/Storage/TS-X53D/" the problem is the same , the system still read only Quote Link to comment Share on other sites More sharing options...
szararsiz Posted February 1, 2022 Share #347 Posted February 1, 2022 (edited) Hello, as a barematel, I had the same problem when trying to install Microserver Gen10 Plus. I think I need to make some edits in the model.conf file, I'm trying to understand it now. And i'm not a programmer too Edited February 1, 2022 by szararsiz Quote Link to comment Share on other sites More sharing options...
szararsiz Posted February 1, 2022 Share #348 Posted February 1, 2022 9 hours ago, snoopy78 said: thank you & yes, since we're here in a forum, it would be helpfull to have at least some basic information of how to proceed.....i currently also try to read the orignal post in here chinese forum but can't it's a bit hard to read sometimes..;) but a quick howto would also be nice for me too, since i'm not a programmer.... Since it is only open to members, we can read the leaked articles on other platforms. Quote Link to comment Share on other sites More sharing options...
snoopy78 Posted February 1, 2022 Share #349 Posted February 1, 2022 1 hour ago, szararsiz said: Since it is only open to members, we can read the leaked articles on other platforms. You can Register there....i dir it too..you need qq and wechat for that.....for me the issue ist currently i need a baidou acc for downloading the File, since i can't Register @baidou...i'll try these days some more....but it Looks so gar interesting...was more Options to do... Quote Link to comment Share on other sites More sharing options...
snoopy78 Posted February 1, 2022 Share #350 Posted February 1, 2022 1 hour ago, szararsiz said: Hello, as a barematel, I had the same problem when trying to install Microserver Gen10 Plus. I think I need to make some edits in the model.conf file, I'm trying to understand it now. And i'm not a programmer too Yes, you must so some Changes at baremetal....i think i made a quick summarization in one of my entries.... I'm currently running an ASRock D1542U Mobo with 2* m.2 mSATA + 5 (out of 8, since WebGUI won't display these, even they are detected in console ) LSI 9300 das hba HDD/SSD + 2* (out off 4) via QM2 4 Port m.2 nvme PCIe Card. So in total 2*500GB WD Red m.2 SATA SSD in Raid1 1(mirror) as Volume for all Apps, Docker, VM's and Importamt data (8 Docker + 4 VMs) 1*1TB Samsung 970Evo Plus as Volume 1*2TB Samsung 970Evo Plus as Volume 1* 4TB WD Red Pro HDD for IPTV recording aß Volume 1* 18TB Thosiba Enterprise HDD as Volume and for Testing currently 1* 4TB Seagate (Home User) HDD for QVR as recording Volume for CCTVs I've also modified my Initial Scripts as mentioned earlier to prevent a qnap Bug/behavior... Now i only wait for my Sundtek DVB-S2X to USB (2* sag) Box from Taiwan, then my Windows Server DVBViewer for Home IPTV can ein virtualized... Power consumption ist around 100W with Spikes to 150W unser load.. The downside ist, that the Boot time ist ~ 15-20minutes...but i don't Boot this device.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.