dedmsk Posted June 26, 2019 Share #1 Posted June 26, 2019 Hi all. GIGABYTE GA-J3455N-D3H Jun's Loader v1.04b DS918+ DSM 6.2.1-23824 Update 6 Very slow boot Power on Xpenology, on screen I see boot screen, then 5-8 minutes freeze and only after that loading DSM There is any opportunity to see exactly what the problem is? Quote Link to comment Share on other sites More sharing options...
v_shurygin Posted June 26, 2019 Share #2 Posted June 26, 2019 I suspect there is the same problem. The configuration is the same, the launch time takes 6 minutes. Quote Link to comment Share on other sites More sharing options...
real3x Posted June 26, 2019 Share #3 Posted June 26, 2019 Nothing to worry, it take some times since 1.04b but nothing wrong in the boot log, try to attach a serial port and look your boot log. Quote Link to comment Share on other sites More sharing options...
dedmsk Posted June 26, 2019 Author Share #4 Posted June 26, 2019 4 hours ago, real3x said: Nothing to worry, it take some times since 1.04b but nothing wrong in the boot log, try to attach a serial port and look your boot log. Connect to serial console. But I see only garbage... Setting correct 1150200/8n Quote Link to comment Share on other sites More sharing options...
dedmsk Posted June 27, 2019 Author Share #5 Posted June 27, 2019 Are there options to write a boot log to a file, without connecting to the console? Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 27, 2019 Share #6 Posted June 27, 2019 On baremetal no. Serial is the only way. Your serial settings must be wrong if you are getting garbage like that. Quote Link to comment Share on other sites More sharing options...
dedmsk Posted June 27, 2019 Author Share #7 Posted June 27, 2019 13 hours ago, dedmsk said: But I see only garbage... Any idea about this? Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 27, 2019 Share #8 Posted June 27, 2019 Read above. Quote Link to comment Share on other sites More sharing options...
dedmsk Posted June 27, 2019 Author Share #9 Posted June 27, 2019 2 hours ago, Polanskiman said: Read above. I checked the settings several times Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 27, 2019 Share #10 Posted June 27, 2019 16 hours ago, dedmsk said: Setting correct 1150200/8n 115200 not 1150200 Quote Link to comment Share on other sites More sharing options...
real3x Posted June 27, 2019 Share #11 Posted June 27, 2019 tip : you can remove the boot arg quiet in grub.cfg for more log Quote Link to comment Share on other sites More sharing options...
dedmsk Posted June 27, 2019 Author Share #12 Posted June 27, 2019 9 hours ago, real3x said: tip : you can remove the boot arg quiet in grub.cfg for more log It's not work 😒 Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 28, 2019 Share #13 Posted June 28, 2019 19 hours ago, real3x said: tip : you can remove the boot arg quiet in grub.cfg for more log 9 hours ago, dedmsk said: It's not work 😒 That was not meant to make it work. It was meant to increase the amount of logs during boot. You need to make the serial connection work first. Did you correct the speed as I suggested? Quote Link to comment Share on other sites More sharing options...
dedmsk Posted June 28, 2019 Author Share #14 Posted June 28, 2019 35 minutes ago, Polanskiman said: That was not meant to make it work. It was meant to increase the amount of logs during boot. You need to make the serial connection work first. Did you correct the speed as I suggested? Yes. Check connection. Check all settings. In garbage I see error words. But can’t see normal log. In settings change fonts and encoding. Check other port speed. Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 28, 2019 Share #15 Posted June 28, 2019 Have you tried another serial consol? Quote Link to comment Share on other sites More sharing options...
dedmsk Posted June 28, 2019 Author Share #16 Posted June 28, 2019 1 hour ago, Polanskiman said: Have you tried another serial consol? Yes on Mac on Win Maybe i am using the wrong cable? Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 28, 2019 Share #17 Posted June 28, 2019 It's a possibility although I think you wouldn't be getting anything if you had the wrong cable but who knows. I use a consol called "Serial" on MAC. Try downloading that and try again. Quote Link to comment Share on other sites More sharing options...
dedmsk Posted June 28, 2019 Author Share #18 Posted June 28, 2019 1 minute ago, Polanskiman said: It's a possibility although I think you wouldn't be getting anything if you had the wrong cable but who knows. I use a consol called "Serial" on MAC. Try downloading that and try again. I use this usb https://static.chipdip.ru/lib/036/DOC001036112.pdf and connect to 2,3 and 5 pin on com port Quote Link to comment Share on other sites More sharing options...
dedmsk Posted June 28, 2019 Author Share #19 Posted June 28, 2019 10 minutes ago, Polanskiman said: It's a possibility although I think you wouldn't be getting anything if you had the wrong cable but who knows. I use a consol called "Serial" on MAC. Try downloading that and try again. please tell me which cable do you use? Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 28, 2019 Share #20 Posted June 28, 2019 Have a read at this post I made: Quote Link to comment Share on other sites More sharing options...
dedmsk Posted June 28, 2019 Author Share #21 Posted June 28, 2019 And I'm going to need DB9f-DB9f adapter. Right ? Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted June 28, 2019 Share #22 Posted June 28, 2019 Possibly yes. I use an old mouse cable. Quote Link to comment Share on other sites More sharing options...
Olegin Posted June 28, 2019 Share #23 Posted June 28, 2019 2 часа назад, dedmsk сказал: I use this usb https://static.chipdip.ru/lib/036/DOC001036112.pdf and connect to 2,3 and 5 pin on com port In this case you need 2 adapters: USB to UART and UART to COM or use adapter like this. Quote Link to comment Share on other sites More sharing options...
dedmsk Posted June 28, 2019 Author Share #24 Posted June 28, 2019 Today I buy USB-RS232 cable and change male connector to female. In 2 hours I will try the cable in action Quote Link to comment Share on other sites More sharing options...
dedmsk Posted June 28, 2019 Author Share #25 Posted June 28, 2019 (edited) dancing dancing I figured out the console. successfully received a log file I also changed the BIOS settings to uefi boot 4 minutes to full launch before 8 minutes in log file.... [ 96.850748] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 101.176259] EXT4-fs (md0): re-mounted. Opts: (null) [ 161.161400] sd 0:0:0:0: Attached scsi generic sg0 type 0 60 seconds it's normal? Full boot 230 seconds CoolTerm Capture 2019-06-28 20-58-07.txt Edited June 28, 2019 by dedmsk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.