Shawn Posted May 11, 2019 Share #1 Posted May 11, 2019 (edited) Dear Community, I am new to PVE or KVM, but I did install xpenology on ESXi with success. However, after I install xpenology on PVE, the web assistant shows “No Hard Disk Found on DS3617xs” error. The mod I use is "with Jun's Mod v1.03b". I have changed the SATA port from 0 to 1. I also changed SATA to SCSI or IDE with no luck. I have attached the settings on PVE as the screenshot below. Is it not possible to install 6.2 on PVE? What's the lastest version that PVE supports? Please help! Edited May 11, 2019 by Shawn Quote Link to comment Share on other sites More sharing options...
prad Posted September 9, 2019 Share #2 Posted September 9, 2019 I have no problem with the DS3615+ und DS3617+ I have al maschines on a proxmox 5.4 and now i have upgraded to proxmox 6.0 Maybe you have a problem with the storage controller of the hardware? IDE isn't working anymore with the new loader! SATA or USB I have the loader on a virtual usb: "args: --drive if=none,id=usbdisk,file=/var/lib/vz/images/101/synoboot.raw,size=50M,format=raw -device nec-usb-xhci,id=xhci,addr=0x9 -device usb-storage,drive=usbdisk,id=usbdisk,bootindex=99" and the the other hard-disks are vm or routed directly to the xpenology by-id May you can add the serial port with socket and read out the problem with the serial-console regards PRad Quote Link to comment Share on other sites More sharing options...
wenlez Posted September 10, 2019 Share #3 Posted September 10, 2019 @prad That USE ARGS didn't work for me. Is that from the DS3617+ ( 1.03b ) loader? Hard drives were recognized by DSM, and so does the 50MB USB image. Quote Link to comment Share on other sites More sharing options...
prad Posted September 13, 2019 Share #4 Posted September 13, 2019 Hi Wenlez! Did you change the path of the file and the filename in the args? The args could be used for every maschine. I use it in 3617 and 3615. regards PRad Quote Link to comment Share on other sites More sharing options...
wenlez Posted September 19, 2019 Share #5 Posted September 19, 2019 I am using DS918+. The path to the file in correctly referenced. Though I haven't try it with the 3617/3615 loader. Quote Link to comment Share on other sites More sharing options...
prad Posted September 24, 2019 Share #6 Posted September 24, 2019 The DS918+ is not running correctly on my proxmox But it is long time ago i have tested this. regards PRad Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.