gnoboot

XPEnology gnoBoot

Recommended Posts

@GnoBoot

Hello

Received your Google Drive link. THX

But 7zip ask for a passxord. Hox to get it ?

 

Thank You

 

Quote from gnoboot blog

 

gnoboot-alpha10.1

Changelog:

 

Fixed - Cannot delete volumes using disk group after creating it, workaround is to reboot the machine first

Fixed - Xen HVM no disk detected during installation

 

Known Issues:

 

No multimedia drivers and missing legacy wireless drivers

VM performance issues running on ESXi 5.5, need testers and more details

Note:

 

View comment to get the password

 

I can't find the password of the zip,where can i view the comment?

thanks a lot

Share this post


Link to post
Share on other sites

@GnoBoot

Hello

Received your Google Drive link. THX

But 7zip ask for a passxord. Hox to get it ?

 

Thank You

Share this post


Link to post
Share on other sites
@GnoBoot

Hello

Received your Google Drive link. THX

But 7zip ask for a passxord. Hox to get it ?

 

Thank You

 

Quote from gnoboot blog

 

gnoboot-alpha10.1

Changelog:

 

Fixed - Cannot delete volumes using disk group after creating it, workaround is to reboot the machine first

Fixed - Xen HVM no disk detected during installation

 

Known Issues:

 

No multimedia drivers and missing legacy wireless drivers

VM performance issues running on ESXi 5.5, need testers and more details

Note:

 

View comment to get the password

 

I can't find the password of the zip,where can i view the comment?

thanks a lot

---------------------------------

gnoboot.blogspot.com

gno boot said...

I will give the password to those who provide review/feedback and active @XPEnology forum. For now, I will not give the password to users @nas1.cn. You've been warned but someone leak the password w/o linking back to my blog.

 

Check the ADs or email me for donation to continue gnoBoot development:) Enjoy!

Share this post


Link to post
Share on other sites

another issue found.

I have setup a machine using VMWare Workstation.

System sometime hang when starting the system.

Message:

:: Loading module ata_piix [busy]

 

And also all folder is missing when mounting samba folder.

The issue happen in alpha8-10.

Share this post


Link to post
Share on other sites
another issue found.

I have setup a machine using VMWare Workstation.

System sometime hang when starting the system.

Message:

:: Loading module ata_piix [busy]

 

And also all folder is missing when mounting samba folder.

The issue happen in alpha8-10.

 

You have to `rm -f /lib/modules/*.ko` when upgrading to latest version.

Share this post


Link to post
Share on other sites
another issue found.

I have setup a machine using VMWare Workstation.

System sometime hang when starting the system.

Message:

:: Loading module ata_piix [busy]

 

And also all folder is missing when mounting samba folder.

The issue happen in alpha8-10.

 

You have to `rm -f /lib/modules/*.ko` when upgrading to latest version.

 

I'll try to update to 4458,but how can I install 4458 by gnoBoot? Is there any change or the image should be re-complined?

thank you

Share this post


Link to post
Share on other sites

It should be the same unless the vendor put another security checks on DSM... :evil:

 

I'm compiling a dsgpl-5.0 kernel right now, and upload later. But it won't work until someone hexed synobios. :ugeek:

Share this post


Link to post
Share on other sites
It should be the same unless the vendor put another security checks on DSM... :evil:

 

I'm compiling a dsgpl-5.0 kernel right now, and upload later. But it won't work until someone hexed synobios. :ugeek:

 

 

I'll wait for detail on your blog:)

Share this post


Link to post
Share on other sites

Trying to upgrade to 4458 with gnoboot9 but failed. Error message is about "there is a temporary directory access error".

 

Checked the autoupd@te.info file and it has the correct updated pat file. Not sure if it's related to the vendor file change or not.

Share this post


Link to post
Share on other sites
[spoiler=]Click the ADs on my blog or email me for donation;) Enjoy

 

:lol:

 

I hate ADs :sad:

I rather donate to support your effort! :lol:

Share this post


Link to post
Share on other sites

First, you have to setup serial logging in XEN, and then boot to GRUB's debug option and send me the output. If that doesn't work for you, simply send me `dmesg` output or /.gnoboot/debug.log with debug enabled. Take note, you won't be able to see any console messages while doing this, add "console=tty0" at the end of GRUB kernel option to enable it.

 

I booted with debug console=tty0, hope it worked as desired :smile:

 

dmesg

[    0.000000] Linux version 3.2.40 (root@gnoboot) (gcc version 4.2.0) #8 SMP Sun Mar 9 14:04:20 CST 2014
[    0.000000] Command line: debug console=tty0
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fc00000 (usable)
[    0.000000]  BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Xen HVM domU, BIOS 4.1.5 11/28/2013
[    0.000000] Hypervisor detected: Xen HVM
[    0.000000] Xen version 4.1.
[    0.000000] Xen Platform PCI: I/O protocol version 1
[    0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
[    0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
[    0.000000] You might have to change the root device
[    0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]
[    0.000000] in your root= kernel command line option
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x1fc00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-combining
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00F0000000 mask 3FF8000000 uncachable
[    0.000000]   1 base 00F8000000 mask 3FFC000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] found SMP MP-table at [ffff8800000fb730] fb730
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000001fc00000
[    0.000000]  0000000000 - 001fc00000 page 2M
[    0.000000] kernel direct mapping tables up to 1fc00000 @ 1fbfe000-1fc00000
[    0.000000] ACPI: RSDP 00000000000ea020 00024 (v02    Xen)
[    0.000000] ACPI: XSDT 00000000fc00eb80 00044 (v01    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: FACP 00000000fc00e940 000F4 (v04    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: DSDT 00000000fc002c40 0BC75 (v02    Xen      HVM 00000000 INTL 20090123)
[    0.000000] ACPI: FACS 00000000fc002c00 00040
[    0.000000] ACPI: APIC 00000000fc00ea40 000D8 (v02    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: HPET 00000000fc00eb20 00038 (v01    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: WAET 00000000fc00eb58 00028 (v01    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001ea00000-ffff88001f1fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x0001fc00
[    0.000000] On node 0 totalpages: 129934
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1722 pages used for memmap
[    0.000000]   DMA32 zone: 124230 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1f48
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 15 CPUs, 13 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 1fc00000 (gap: 1fc00000:dc400000)
[    0.000000] Booting paravirtualized kernel on Xen HVM
[    0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:15 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88001f800000 s75776 r8192 d22528 u131072
[    0.000000] pcpu-alloc: s75776 r8192 d22528 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 -- 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128151
[    0.000000] Kernel command line: root=/dev/md0 ihd_num=1 netif_num=4 syno_hw_version=DS3612xs debug console=tty0
[    0.000000] Internal HD num: 1
[    0.000000] Internal netif num: 4
[    0.000000] Synology Hardware Version: DS3612xs-j
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 486688k/520192k available (3531k kernel code, 456k absent, 33048k reserved, 2928k data, 14224k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:1208 16
[    0.000000] Xen HVM callback vector for event delivery is enabled
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Detected 1995.067 MHz processor.
[    0.001999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.13 BogoMIPS (lpj=1995067)
[    0.001999] pid_max: default: 32768 minimum: 301
[    0.001999] Mount-cache hash table entries: 256
[    0.001999] mce: CPU supports 0 MCE banks
[    0.010684] ACPI: Core revision 20110623
[    0.016802] Switched APIC routing to physical flat.
[    0.018381] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.029168] CPU0: Intel(R) Xeon(R) CPU            5130  @ 2.00GHz stepping 0b
[    0.029193] Xen: using vcpuop timer interface
[    0.029206] installing Xen timer for CPU 0
[    0.029309] cpu 0 spinlock event irq 69
[    0.029315] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
[    0.031037] cpu 1 spinlock event irq 70
[    0.032051] Booting Node   0, Processors  #1
[    0.032058] smpboot cpu 1: start_ip = 99000
[    0.001999] mce: CPU supports 0 MCE banks
[    0.165083] installing Xen timer for CPU 1
[    0.165116] Brought up 2 CPUs
[    0.165133] Total of 2 processors activated (4636.34 BogoMIPS).
[    0.205024] xor: automatically using best checksumming function: generic_sse
[    0.209998]    generic_sse:   156.000 MB/sec
[    0.210004] xor: using function: generic_sse (156.000 MB/sec)
[    0.210135] NET: Registered protocol family 16
[    0.221003] ACPI: bus type pci registered
[    0.224110] PCI: Using configuration type 1 for base access
[    0.305104] bio: create slab  at 0
[    0.323994] raid6: int64x1    234 MB/s
[    0.341001] raid6: int64x2    316 MB/s
[    0.357989] raid6: int64x4    316 MB/s
[    0.374980] raid6: int64x8    222 MB/s
[    0.391984] raid6: sse2x1     375 MB/s
[    0.408973] raid6: sse2x2     593 MB/s
[    0.425971] raid6: sse2x4     652 MB/s
[    0.425976] raid6: using algorithm sse2x4 (652 MB/s)
[    0.426978] ACPI: Added _OSI(Module Device)
[    0.426985] ACPI: Added _OSI(Processor Device)
[    0.426991] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.426996] ACPI: Added _OSI(Processor Aggregator Device)
[    0.443067] ACPI: EC: Look up EC in DSDT
[    0.489000] ACPI: Interpreter enabled
[    0.489012] ACPI: (supports S0 S5)
[    0.489028] ACPI: Using IOAPIC for interrupt routing
[    0.910982] ACPI: No dock devices found.
[    0.910993] HEST: Table not found.
[    0.911001] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.911937] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.913006] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.913890] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.913897] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.913904] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff]
[    0.914031] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[    0.920023] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[    0.929047] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[    0.935886] pci 0000:00:01.1: reg 20: [io  0xc220-0xc22f]
[    0.939045] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[    0.945029] pci 0000:00:01.2: reg 20: [io  0xc200-0xc21f]
[    0.949946] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[    0.949982] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[    0.949985] * this clock source is slow. Consider trying other clock sources
[    0.958055] pci 0000:00:01.3: quirk: [io  0x1f40-0x1f7f] claimed by PIIX4 ACPI
[    0.960968] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[    0.962882] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
[    0.963948] pci 0000:00:02.0: reg 14: [mem 0xf3000000-0xf3000fff]
[    0.970969] pci 0000:00:03.0: [5853:0001] type 0 class 0x000100
[    0.972881] pci 0000:00:03.0: reg 10: [io  0xc000-0xc0ff]
[    0.973880] pci 0000:00:03.0: reg 14: [mem 0xf2000000-0xf2ffffff pref]
[    0.980049] pci_bus 0000:00: on NUMA node 0
[    0.980883] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.984055]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    1.820894] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[    1.821913] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.822820] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.823007] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[    1.823915] xen/balloon: Initialising balloon driver.
[    1.824830] xen-balloon: Initialising balloon driver.
[    1.825887] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.826756] vgaarb: loaded
[    1.826761] vgaarb: bridge control possible 0000:00:02.0
[    1.827847] SCSI subsystem initialized
[    1.829748] libata version 3.00 loaded.
[    1.831746] PCI: Using ACPI for IRQ routing
[    1.831754] PCI: pci_cache_line_size set to 64 bytes
[    1.832896] reserve RAM buffer: 000000000009e000 - 000000000009ffff 
[    1.832903] reserve RAM buffer: 000000001fc00000 - 000000001fffffff 
[    1.834802] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.834829] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.834838] hpet0: 3 comparators, 64-bit 62.500000 MHz counter
[    1.841922] Switching to clocksource xen
[    1.842083] pnp: PnP ACPI init
[    1.842106] ACPI: bus type pnp registered
[    1.842136] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    1.842352] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    1.842361] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.842460] pnp 00:01: [bus 00-ff]
[    1.842467] pnp 00:01: [io  0x0cf8-0x0cff]
[    1.842473] pnp 00:01: [io  0x0000-0x0cf7 window]
[    1.842479] pnp 00:01: [io  0x0d00-0xffff window]
[    1.842485] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    1.842492] pnp 00:01: [mem 0xf0000000-0xfbffffff window]
[    1.842697] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    1.842715] pnp 00:02: [io  0x10c0-0x1141]
[    1.842721] pnp 00:02: [io  0xb044-0xb047]
[    1.842917] system 00:02: [io  0x10c0-0x1141] has been reserved
[    1.842925] system 00:02: [io  0xb044-0xb047] has been reserved
[    1.842933] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.842969] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.843184] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.843215] pnp 00:04: [io  0x0010-0x001f]
[    1.843222] pnp 00:04: [io  0x0022-0x002d]
[    1.843230] pnp 00:04: [io  0x0030-0x003f]
[    1.843236] pnp 00:04: [io  0x0044-0x005f]
[    1.843241] pnp 00:04: [io  0x0062-0x0063]
[    1.843246] pnp 00:04: [io  0x0065-0x006f]
[    1.843252] pnp 00:04: [io  0x0072-0x007f]
[    1.843257] pnp 00:04: [io  0x0080]
[    1.843263] pnp 00:04: [io  0x0084-0x0086]
[    1.843268] pnp 00:04: [io  0x0088]
[    1.843274] pnp 00:04: [io  0x008c-0x008e]
[    1.843279] pnp 00:04: [io  0x0090-0x009f]
[    1.843285] pnp 00:04: [io  0x00a2-0x00bd]
[    1.843290] pnp 00:04: [io  0x00e0-0x00ef]
[    1.843296] pnp 00:04: [io  0x08a0-0x08a3]
[    1.843301] pnp 00:04: [io  0x0cc0-0x0ccf]
[    1.843307] pnp 00:04: [io  0x04d0-0x04d1]
[    1.843509] system 00:04: [io  0x08a0-0x08a3] has been reserved
[    1.843517] system 00:04: [io  0x0cc0-0x0ccf] has been reserved
[    1.843524] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    1.843531] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.843551] pnp 00:05: [dma 4]
[    1.843557] pnp 00:05: [io  0x0000-0x000f]
[    1.843563] pnp 00:05: [io  0x0081-0x0083]
[    1.843568] pnp 00:05: [io  0x0087]
[    1.843574] pnp 00:05: [io  0x0089-0x008b]
[    1.843579] pnp 00:05: [io  0x008f]
[    1.843584] pnp 00:05: [io  0x00c0-0x00df]
[    1.843590] pnp 00:05: [io  0x0480-0x048f]
[    1.843785] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.843804] pnp 00:06: [io  0x0070-0x0071]
[    1.843825] xen: --> pirq=16 -> irq=8 (gsi=8)
[    1.843832] pnp 00:06: [irq 8]
[    1.844016] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.844034] pnp 00:07: [io  0x0061]
[    1.844265] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.844299] xen: --> pirq=17 -> irq=12 (gsi=12)
[    1.844306] pnp 00:08: [irq 12]
[    1.844490] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.844517] pnp 00:09: [io  0x0060]
[    1.844523] pnp 00:09: [io  0x0064]
[    1.844536] xen: --> pirq=18 -> irq=1 (gsi=1)
[    1.844542] pnp 00:09: [irq 1]
[    1.844741] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.844768] pnp 00:0a: [io  0x03f0-0x03f5]
[    1.844774] pnp 00:0a: [io  0x03f7]
[    1.844787] xen: --> pirq=19 -> irq=6 (gsi=6)
[    1.844793] pnp 00:0a: [irq 6]
[    1.844798] pnp 00:0a: [dma 2]
[    1.844984] pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.845019] pnp 00:0b: [io  0x03f8-0x03ff]
[    1.845033] xen: --> pirq=20 -> irq=4 (gsi=4)
[    1.845039] pnp 00:0b: [irq 4]
[    1.845270] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.845317] pnp 00:0c: [io  0x0378-0x037f]
[    1.845331] xen: --> pirq=21 -> irq=7 (gsi=7)
[    1.845338] pnp 00:0c: [irq 7]
[    1.845526] pnp 00:0c: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.873657] pnp: PnP ACPI: found 13 devices
[    1.873670] ACPI: ACPI bus type pnp unregistered
[    1.887738] PCI: max bus depth: 0 pci_try_num: 1
[    1.887753] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.887760] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.887766] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.887773] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff]
[    1.887946] NET: Registered protocol family 2
[    1.888095] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[    1.888464] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    1.888564] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    1.888658] TCP: Hash tables configured (established 16384 bind 16384)
[    1.888664] TCP reno registered
[    1.888671] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    1.888681] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    1.888826] NET: Registered protocol family 1
[    1.889124] RPC: Registered named UNIX socket transport module.
[    1.889131] RPC: Registered udp transport module.
[    1.889136] RPC: Registered tcp transport module.
[    1.889142] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.889153] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.889224] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.889299] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.889422] xen: --> pirq=22 -> irq=23 (gsi=23)
[    1.889429] pci 0000:00:01.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.889694] pci 0000:00:01.2: PCI INT D disabled
[    1.889788] pci 0000:00:02.0: Boot video device
[    1.889851] PCI: CLS 0 bytes, default 64
[    2.414105] VFS: Disk quotas dquot_6.5.2
[    2.414177] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.414581] Registering the id_resolver key type
[    2.417158] msgmni has been set to 950
[    2.417208] async_tx: api initialized (async)
[    2.419850] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.419861] io scheduler noop registered
[    2.419866] io scheduler deadline registered
[    2.419911] io scheduler cfq registered (default)
[    2.436312] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.450460] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.450472] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    2.456170] acpiphp: Slot [0] registered
[    2.463120] acpiphp: Slot [1] registered
[    2.466624] acpiphp: Slot [2] registered
[    2.474718] acpiphp: Slot [3] registered
[    2.481585] acpiphp: Slot [4] registered
[    2.486310] acpiphp: Slot [5] registered
[    2.491886] acpiphp: Slot [6] registered
[    2.499197] acpiphp: Slot [7] registered
[    2.504459] acpiphp: Slot [8] registered
[    2.510088] acpiphp: Slot [9] registered
[    2.515784] acpiphp: Slot [10] registered
[    2.523865] acpiphp: Slot [11] registered
[    2.529536] acpiphp: Slot [12] registered
[    2.537899] acpiphp: Slot [13] registered
[    2.543485] acpiphp: Slot [14] registered
[    2.549749] acpiphp: Slot [15] registered
[    2.554636] acpiphp: Slot [16] registered
[    2.558844] acpiphp: Slot [17] registered
[    2.566864] acpiphp: Slot [18] registered
[    2.570120] acpiphp: Slot [19] registered
[    2.577045] acpiphp: Slot [20] registered
[    2.582622] acpiphp: Slot [21] registered
[    2.588625] acpiphp: Slot [22] registered
[    2.592767] acpiphp: Slot [23] registered
[    2.599575] acpiphp: Slot [24] registered
[    2.606913] acpiphp: Slot [25] registered
[    2.611904] acpiphp: Slot [26] registered
[    2.620428] acpiphp: Slot [27] registered
[    2.629244] acpiphp: Slot [28] registered
[    2.633191] acpiphp: Slot [29] registered
[    2.635276] acpiphp: Slot [30] registered
[    2.642336] acpiphp: Slot [31] registered
[    2.652945] vesafb: mode is 1024x768x24, linelength=3072, pages=0
[    2.652955] vesafb: scrolling: redraw
[    2.652964] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    2.653202] vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90000080000, using 4096k, total 4096k
[    2.674674] Console: switching to colour frame buffer device 128x48
[    2.680320] fb0: VESA VGA frame buffer device
[    2.689096] intel_idle: does not run on family 6 model 15
[    2.693843] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.693935] ACPI: Power Button [PWRF]
[    2.697238] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[    2.697324] ACPI: Sleep Button [sLPF]
[    2.745683] ERST: Table is not found!
[    2.745742] GHES: HEST is not enabled!
[    2.745901] xen: --> pirq=23 -> irq=30 (gsi=30)
[    2.745949] xen-platform-pci 0000:00:03.0: PCI INT C -> GSI 30 (level, low) -> IRQ 30
[    2.748754] Grant table initialized
[    2.763118] init_memory_mapping: 0000000020000000-0000000028000000
[    2.763253]  0020000000 - 0028000000 page 2M
[    3.272152] Refined TSC clocksource calibration: 1995.062 MHz.
[    5.798389] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    5.853566] serial8250: ttyS1 at I/O 0x3f8 (irq = 4) is a 16550A
[    6.143389] brd: module loaded
[    6.151478] vbd vbd-5696: 19 xenbus_dev_probe on device/vbd/5696
[    6.157371] blkfront: sda: barrier: enabled
[    6.199412]  sda: sda1
[    6.201364] This is not a kind of scsi disk 202
[    6.209294] Loading iSCSI transport class v2.0-870.
[    6.251028] blkfront: sdb: barrier: enabled
[    6.300756]  sdb: sdb1 sdb2
[    6.302763] This is not a kind of scsi disk 202
[    6.304532] This is not a kind of scsi disk 202
[    6.359262] Setting capacity to 65536
[    6.361640] sda: detected capacity change from 0 to 33554432
[    6.415097] rdac: device handler registered
[    6.495890] Initialising Xen virtual ethernet driver.
[    6.560397] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    6.576266] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.578537] serio: i8042 AUX port at 0x60,0x64 irq 12
[    6.600282] rtc_cmos 00:06: RTC can wake from S4
[    6.613295] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    6.615517] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    6.626577] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    6.635914] i2c /dev entries driver
[    6.642246] md: linear personality registered for level -1
[    6.645110] md: raid0 personality registered for level 0
[    6.647195] md: raid1 personality registered for level 1
[    6.650390] md: raid10 personality registered for level 10
[    6.652521] md: raid6 personality registered for level 6
[    6.654466] md: raid5 personality registered for level 5
[    6.656371] md: raid4 personality registered for level 4
[    6.671460] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    6.673761] cpuidle: using governor ladder
[    6.675737] cpuidle: using governor menu
[    6.678018] TCP cubic registered
[    6.679846] NET: Registered protocol family 17
[    6.681811] Registering the dns_resolver key type
[    6.686389] XENBUS: Device with no driver: device/vbd/5696
[    6.689145] rtc_cmos 00:06: setting system clock to 2014-03-09 17:55:32 UTC (1394387732)
[    6.700470] Freeing unused kernel memory: 14224k freed
[    6.712689] Write protecting the kernel read-only data: 6144k
[    6.720007] Freeing unused kernel memory: 548k freed
[    6.723985] Freeing unused kernel memory: 268k freed
[    7.012640] Event-channel device installed.
[    7.045170] virtio_blk: Unknown symbol register_virtio_driver (err 0)
[    7.048698] virtio_blk: Unknown symbol unregister_virtio_driver (err 0)
[    7.050488] virtio_blk: Unknown symbol virtqueue_add_buf_gfp (err 0)
[    7.052282] virtio_blk: Unknown symbol virtqueue_get_buf (err 0)
[    7.054001] virtio_blk: Unknown symbol virtqueue_kick (err 0)
[    7.055685] virtio_blk: Unknown symbol virtio_check_driver_offered_feature (err 0)
[    7.082835] virtio_net: Unknown symbol register_virtio_driver (err 0)
[    7.086809] virtio_net: Unknown symbol virtqueue_enable_cb (err 0)
[    7.089378] virtio_net: Unknown symbol virtqueue_detach_unused_buf (err 0)
[    7.092001] virtio_net: Unknown symbol unregister_virtio_driver (err 0)
[    7.093977] virtio_net: Unknown symbol virtqueue_add_buf_gfp (err 0)
[    7.095798] virtio_net: Unknown symbol virtqueue_get_vring_size (err 0)
[    7.097730] virtio_net: Unknown symbol virtqueue_disable_cb (err 0)
[    7.099549] virtio_net: Unknown symbol virtqueue_get_buf (err 0)
[    7.101249] virtio_net: Unknown symbol virtqueue_kick (err 0)
[    7.102911] virtio_net: Unknown symbol virtio_check_driver_offered_feature (err 0)
[    7.104607] virtio_net: Unknown symbol virtqueue_enable_cb_delayed (err 0)
[    7.129354] virtio_ring: Unknown symbol virtio_check_driver_offered_feature (err 0)
[    7.199768] virtio_balloon: Unknown symbol virtqueue_add_buf_gfp (err 0)
[    7.203522] virtio_balloon: Unknown symbol virtqueue_get_buf (err 0)
[    7.205396] virtio_balloon: Unknown symbol virtqueue_kick (err 0)
[    7.230950] virtio_mmio: Unknown symbol vring_transport_features (err 0)
[    7.234737] virtio_mmio: Unknown symbol vring_interrupt (err 0)
[    7.236644] virtio_mmio: Unknown symbol vring_new_virtqueue (err 0)
[    7.239148] virtio_mmio: Unknown symbol vring_del_virtqueue (err 0)
[    7.262754] virtio_pci: Unknown symbol vring_transport_features (err 0)
[    7.267915] virtio_pci: Unknown symbol vring_interrupt (err 0)
[    7.270011] virtio_pci: Unknown symbol vring_new_virtqueue (err 0)
[    7.272139] virtio_pci: Unknown symbol vring_del_virtqueue (err 0)
[    7.298572] virtio_console: Unknown symbol virtqueue_detach_unused_buf (err 0)
[    7.302588] virtio_console: Unknown symbol virtqueue_add_buf_gfp (err 0)
[    7.304668] virtio_console: Unknown symbol virtqueue_get_buf (err 0)
[    7.306725] virtio_console: Unknown symbol virtqueue_kick (err 0)
[    7.353707] md: Autodetecting RAID arrays.
[    7.356602] This is not a kind of scsi disk 202
[    7.392478] md: deny sdb1.
[    7.394498] md: export_rdev(sdb1)
[    7.396344] This is not a kind of scsi disk 202
[    7.423834] md: deny sdb2.
[    7.426216] md: export_rdev(sdb2)
[    7.428446] md: Scanned 2 and added 0 devices.
[    7.430751] md: autorun ...
[    7.432868] md: ... autorun DONE.
[    7.524669] bromolow_synobios: module license 'Synology Inc.' taints kernel.
[    7.527160] Disabling lock debugging due to kernel taint
[    7.532712] synobios: load, major number 201
[    7.534768] Brand: Synology
[    7.536728] Model: DS-3612xs
[    7.538621] set group disks wakeup number to 4, spinup time deno 7
[    8.103712] synobios: unload
[    8.608616] md: md1 stopped.
[    8.856456] Unable to find swap-space signature
[    8.955418] NET: Registered protocol family 10
[    9.129875] usbcore: registered new interface driver usbfs
[    9.136685] usbcore: registered new interface driver hub
[    9.142745] usbcore: registered new interface driver ethub
[    9.153570] usbcore: registered new device driver usb
[   10.343323] fuse init (API version 7.17)
[   10.377242] dca service started, version 1.12.1
[   10.410490] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[   10.412687] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[   10.458928] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
[   10.460801] Copyright (c) 2007-2011 Intel Corporation.
[   10.523322] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.6.7-k
[   10.526195] ixgbe: Copyright (c) 1999-2011 Intel Corporation.
[   10.688842] Btrfs loaded
[   10.833198] synobios: load, major number 201
[   10.835065] Brand: Synology
[   10.836639] Model: DS-3612xs
[   10.838112] set group disks wakeup number to 4, spinup time deno 7
[   19.603315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   19.636304] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   19.742928] uhci_hcd: USB Universal Host Controller Interface driver
[   19.747116] uhci_hcd 0000:00:01.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[   19.749643] uhci_hcd 0000:00:01.2: setting latency timer to 64
[   19.751812] uhci_hcd 0000:00:01.2: UHCI Host Controller
[   19.754358] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[   19.756835] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200
[   19.760161] hub 1-0:1.0: USB hub found
[   19.762054] hub 1-0:1.0: 2 ports detected
[   19.823173] Initializing USB Mass Storage driver...
[   19.829487] usbcore: registered new interface driver usb-storage
[   19.831539] USB Mass Storage support registered.
[   19.862187] usbcore: registered new interface driver usblp
[   19.936136] usbcore: registered new interface driver usbhid
[   19.940635] usbhid: USB HID core driver
[   20.123171] usb 1-2: new full-speed USB device number 2 using uhci_hcd
[   21.308222] input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input3
[   21.312869] Get empty minor:104
[   21.317872] generic-usb 0003:0627:0001.0001: input,hiddev0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0

 

/.gnoboot/debug

+ gnoBootIsCmdParam gnoboot_upgrade
+ param=gnoboot_upgrade
+ grep -c gnoboot_upgrade /proc/cmdline
+ found=0
+ [ 0 -eq 1 ]
+ echo 0
+ [ 0 -eq 1 ]
+ gnoBootRegen
+ procpart=/proc/partitions
+ grep -cv # /proc/partitions
+ [ 6 -le 1 ]
+ disksec=32098
+ grep 32098 /proc/partitions
+ cut -c 26-
+ diskpre=sda1
+ [ sda1x == x ]
+ diskpre=sda
+ grep sda /proc/partitions
+ cut -c 26-
+ disklist=sda
sda1
+ dsknum=
+ synoboot=/dev/synoboot
+ grep sda$ /proc/partitions
+ dskline= 202        0      32768 sda
+ grep sda$ /proc/partitions
+ cut -c -4
+ dskmaj= 202
+ grep sda$ /proc/partitions
+ cut -c 5-13
+ dskmin=        0
+ dskdev=/dev/sda
+ dsknum=
+ [ -e /dev/sda ]
+ rm -f /dev/sda
+ echo Creating /dev/synoboot...
+ [ -z  ]
+ rm -f /dev/synoboot
+ mknod /dev/synoboot b 202 0
+ dsknum=
+ synoboot=/dev/synoboot
+ grep sda1$ /proc/partitions
+ dskline= 202        1      32098 sda1
+ grep sda1$ /proc/partitions
+ cut -c -4
+ dskmaj= 202
+ cut -c 5-13
+ grep sda1$ /proc/partitions
+ dskmin=        1
+ dskdev=/dev/sda1
+ dsknum=1
+ [ -e /dev/sda1 ]
+ rm -f /dev/sda1
+ echo Creating /dev/synoboot...
+ [ -z 1 ]
+ synoboot=/dev/synoboot1
+ rm -f /dev/synoboot1
+ mknod /dev/synoboot1 b 202 1
+ [ 1 -eq 1 ]
+ ln -sf /dev/synoboot1 /dev/synoboot2
+ [ ppc853x = bromolow ]
+ [ -x /usr/syno/bin/synocfgen ]
+ insmod /lib/modules/synobios.ko
+ /bin/mknod /dev/synobios c 201 0
+ RCMsg Starting /usr/syno/bin/synocfgen /usr/syno/bin/synocfgen
+ echo -n :: Starting /usr/syno/bin/synocfgen
+ shift
+ [ 1 -eq 0 ]
+ [ yes = yes ]
+ MsgBusy
+ [ -n  ]
+ echo -en \e[72G[
+ echo -en \e[0;32m BUSY 
+ echo -en \e[m]
+ /usr/syno/bin/synocfgen
+ local ret=0
+ [ 0 -eq 0 ]
+ MsgDone
+ [ -n  ]
+ echo -en \e[72G[
+ echo -en \e[1;32m  OK  
+ echo -e \e[m]
+ return 0
+ RetCfg=0
+ echo /usr/syno/bin/synocfgen returns 0
+ /bin/grep synobios
+ /usr/bin/cut -f 1 -d  
+ /sbin/lsmod
+ rmmod bromolow_synobios
+ [ ppc853x = bromolow ]
+ /bin/get_key_value /etc/synoinfo.conf supportraid
+ SupportRAID=yes
+ /bin/get_key_value /etc/synoinfo.conf defaultfs
+ DefFS=ext4
+ /bin/get_key_value /etc/synoinfo.conf support_dual_head
+ DualHead=
+ FSCK=/sbin/e2fsck
+ FsckFlag=/tmp/.fsckfail
+ MkfsFlag=/tmp/.mkfsfail
+ /bin/get_key_value /etc.defaults/synoinfo.conf unique
+ grep comcerto2k
+ [ x != x ]
+ /bin/get_key_value /etc.defaults/synoinfo.conf supportsas
+ SupportSAS=
+ [  = yes ]
+ support_emmc_boot
+ local emmc_boot
+ /bin/get_key_value /etc.defaults/synoinfo.conf support_emmc_boot
+ emmc_boot=
+ [ xyes = x ]
+ return 1
+ [  = yes ]
+ [ yes = yes ]
+ RootDevice=/dev/md0
+ /usr/syno/bin/synodiskport -internal
+ ProcDiskList= sda sdb
+ Ret=0
+ [ 0 != 12 -a x = x sda sdb ]
+ [ ! -d /sys/block/md0 -a yes = yes ]
+ [ 0 != 12 ]
+ CheckPartition
+ /usr/syno/bin/synocheckpartition
+ RetPartition=0
+ echo Partition Version=0
+ ExecFsck=1
+ [ 0 -eq 0 ]
+ echo Partition layout is not DiskStation style.
+ echo NOT EXECUTE /sbin/e2fsck.
+ ExecFsck=0
+ [ yes !=  ]
+ CheckRootFs
+ [ -x /sbin/e2fsck -a 0 -eq 1 ]
+ echo Mounting /dev/md0 /tmpRoot
+ /bin/mount /dev/md0 /tmpRoot
mount: lseek failed, msg:Invalid argument
mount: mounting /dev/md0 on /tmpRoot failed: No such device
+ RCMsg mount /dev/md0 fail, returns  touch /tmp/.fsckfail
+ echo -n :: mount /dev/md0 fail, returns 
+ shift
+ [ 2 -eq 0 ]
+ [ yes = yes ]
+ MsgBusy
+ [ -n  ]
+ echo -en \e[72G[
+ echo -en \e[0;32m BUSY 
+ echo -en \e[m]
+ touch /tmp/.fsckfail
+ local ret=0
+ [ 0 -eq 0 ]
+ MsgDone
+ [ -n  ]
+ echo -en \e[72G[
+ echo -en \e[1;32m  OK  
+ echo -e \e[m]
+ return 0
+ echo /tmpRoot/lost+found/#*
+ FileList=/tmpRoot/lost+found/#*
+ [ /tmpRoot/lost+found/#* != /tmpRoot/lost+found/#* ]
+ [ yes =  ]
+ RCMsg Checking upgrade file /bin/sh /etc/upgrade.sh
+ echo -n :: Checking upgrade file
+ shift
+ [ 2 -eq 0 ]
+ [ yes = yes ]
+ MsgBusy
+ [ -n  ]
+ echo -en \e[72G[
+ echo -en \e[0;32m BUSY 
+ echo -en \e[m]
+ /bin/sh /etc/upgrade.sh
+ local ret=0
+ [ 0 -eq 0 ]
+ MsgDone
+ [ -n  ]
+ echo -en \e[72G[
+ echo -en \e[1;32m  OK  
+ echo -e \e[m]
+ return 0
+ /bin/get_key_value /etc.defaults/synoinfo.conf support_ssd_cache
+ SupportSSDCache=yes
+ [ yes = yes -a -d /sys/block/md0 ]
+ WithInternal=0
+ ls /sys/block/md0/md/
+ grep dev-
+ cut -c 5-
+ md0disks=
+ [ -n  -a 0 -eq 0 ]
+ [ ! -d /tmpRoot/etc ]
+ RCMsg Copy default /etc rm -rf /tmpRoot/etc
+ echo -n :: Copy default /etc
+ shift
+ [ 3 -eq 0 ]
+ [ yes = yes ]
+ MsgBusy
+ [ -n  ]
+ echo -en \e[72G[
+ echo -en \e[0;32m BUSY 
+ echo -en \e[m]
+ rm -rf /tmpRoot/etc
+ local ret=0
+ [ 0 -eq 0 ]
+ MsgDone
+ [ -n  ]
+ echo -en \e[72G[
+ echo -en \e[1;32m  OK  
+ echo -e \e[m]
+ return 0
+ cp -R /tmpRoot/etc.defaults /tmpRoot/etc
cp: can't stat '/tmpRoot/etc.defaults': No such file or directory
+ [ ! -d /tmpRoot/usr/syno/etc ]
+ RCMsg Copy default /usr/syno/etc rm -rf /tmpRoot/usr/syno/etc
+ echo -n :: Copy default /usr/syno/etc
+ shift
+ [ 3 -eq 0 ]
+ [ yes = yes ]
+ MsgBusy
+ [ -n  ]
+ echo -en \e[72G[
+ echo -en \e[0;32m BUSY 
+ echo -en \e[m]
+ rm -rf /tmpRoot/usr/syno/etc
+ local ret=0
+ [ 0 -eq 0 ]
+ MsgDone
+ [ -n  ]
+ echo -en \e[72G[
+ echo -en \e[1;32m  OK  
+ echo -e \e[m]
+ return 0
+ cp -R /tmpRoot/usr/syno/etc.defaults /tmpRoot/usr/syno/etc
cp: can't stat '/tmpRoot/usr/syno/etc.defaults': No such file or directory
+ [ ! -d /tmpRoot/var ]
+ RCMsg Copy default /var rm -rf /tmpRoot/var
+ echo -n :: Copy default /var
+ shift
+ [ 3 -eq 0 ]
+ [ yes = yes ]
+ MsgBusy
+ [ -n  ]
+ echo -en \e[72G[
+ echo -en \e[0;32m BUSY 
+ echo -en \e[m]
+ rm -rf /tmpRoot/var
+ local ret=0
+ [ 0 -eq 0 ]
+ MsgDone
+ [ -n  ]
+ echo -en \e[72G[
+ echo -en \e[1;32m  OK  
+ echo -e \e[m]
+ return 0
+ cp -R /tmpRoot/var.defaults /tmpRoot/var
cp: can't stat '/tmpRoot/var.defaults': No such file or directory
+ [ -f /tmpRoot/.noroot ]
+ [ ! -x /tmpRoot/sbin/init ]
+ Exit 3 no init exists
+ [ -n no init exists ]
+ echo Exit on error [3] no init exists...
+ grep -q ^/dev/md0 /proc/mounts
+ grep -q sysfs /proc/mounts
+ /bin/umount /sys
+ grep -q ^/proc /proc/mounts
+ exit 3

Share this post


Link to post
Share on other sites
[spoiler=]Click the ADs on my blog or email me for donation;) Enjoy

 

:lol:

 

 

I use the 10.1 upgrade 4458. Prompt error, can not be upgraded. How do I upgrade?

I walked through the Great Wall to your blog, and click on the ads on the page. If you know who click on the ads?

A lot of people do not know how to cross the Great Wall have your blog up! So some people forwarded your article.

 

MY NAS 主板

Asrock u68-s

 

Guide use IDE DOM 256

Share this post


Link to post
Share on other sites

I hate ADs :sad:

I rather donate to support your effort! :lol:

You can send me Amazon gift card if you want. :wink:

 

I use the 10.1 upgrade 4458. Prompt error, can not be upgraded. How do I upgrade?

I walked through the Great Wall to your blog, and click on the ads on the page. If you know who click on the ads?

A lot of people do not know how to cross the Great Wall have your blog up! So some people forwarded your article.

 

MY NAS 主板

Asrock u68-s

 

Guide use IDE DOM 256

 

Does GW filter by IP or domain name? BTW, have you read my last post :roll:

Share this post


Link to post
Share on other sites

Does GW filter by IP or domain name? BTW, have you read my last post :roll:

 

i think the GW is the firewall filter by keywords, dns and etc.

more info: en.wikipedia.org/wiki/Golden_Shield_Project

 

 

I found a very inconsistent transfer speeds on the cifs. speeds between 10mb ~ 110mb

my test env:

esxi 5.5, DSM 4.3 with A9 boot, vRAM 8GB.

E1230 16GB RAM, 256GB SSD (data storage), WD 4TB disk (VMFS), WD 2TB(RDM),

 

 

again thank you for your awesome job.

Share this post


Link to post
Share on other sites

I hate ADs :sad:

I rather donate to support your effort! :lol:

You can send me Amazon gift card if you want. :wink:

 

I use the 10.1 upgrade 4458. Prompt error, can not be upgraded. How do I upgrade?

I walked through the Great Wall to your blog, and click on the ads on the page. If you know who click on the ads?

A lot of people do not know how to cross the Great Wall have your blog up! So some people forwarded your article.

 

MY NAS 主板

Asrock u68-s

 

Guide use IDE DOM 256

 

Does GW filter by IP or domain name? BTW, have you read my last post :roll:

I've read you last post

yuko it‘s me

Upgrade 4485

Use kernel patch?

Share this post


Link to post
Share on other sites

Does GW filter by IP or domain name? BTW, have you read my last post :roll:

 

i think the GW is the firewall filter by keywords, dns and etc.

more info: en.wikipedia.org/wiki/Golden_Shield_Project

 

 

I found a very inconsistent transfer speeds on the cifs. speeds between 10mb ~ 110mb

my test env:

esxi 5.5, DSM 4.3 with A9 boot, vRAM 8GB.

E1230 16GB RAM, 256GB SSD (data storage), WD 4TB disk (VMFS), WD 2TB(RDM),

 

 

again thank you for your awesome job.

 

Good for you! I'm getting 1mb flat using mpt2sas driver + lsi 9211-8i (IR RAID0) + SSD on alpha10.2. :lol: What version are you using?

Share this post


Link to post
Share on other sites

Good for you! I'm getting 1mb flat using mpt2sas driver + lsi 9211-8i (IR RAID0) + SSD on alpha10.2. :lol: What version are you using?

 

I'll be trying out alpha 10.2 and a lsi 9201-8i (IT mode) via passthrough in the next day or so. Swapping out new disks one by one and repairing array to copy current system to new array. Only 1.5 disks to go. They take like 12 hours each :razz:

Share this post


Link to post
Share on other sites

Lsi 9271-8 and H710p

I just use photo station on the dsm as the front end for the mobile device. The window sever is the main storage as the back end. That is why I prefer to use cifs mount on dsm instead of NSF or ISCSI.

 

I use vmkfstools -z / -v to create the LUN for dsm instead of the raid controller passthrough.

Test env:

Gnoboot alpha 9 - dsm 4.3

Esxi 5.5

Windows 2012 r2 std

Share this post


Link to post
Share on other sites

Does GW filter by IP or domain name? BTW, have you read my last post :roll:

 

i think the GW is the firewall filter by keywords, dns and etc.

more info: en.wikipedia.org/wiki/Golden_Shield_Project

 

 

I found a very inconsistent transfer speeds on the cifs. speeds between 10mb ~ 110mb

my test env:

esxi 5.5, DSM 4.3 with A9 boot, vRAM 8GB.

E1230 16GB RAM, 256GB SSD (data storage), WD 4TB disk (VMFS), WD 2TB(RDM),

 

 

again thank you for your awesome job.

 

Good for you! I'm getting 1mb flat using mpt2sas driver + lsi 9211-8i (IR RAID0) + SSD on alpha10.2. :lol: What version are you using?

 

Dear Gnoboot,

 

Could you show us your configs in esxi (hardware/software)?

I can't found out which 10.2 img in your drive,

i am using N40L, 9261-8i with 16G Ram.

 

Sad to hear you end your project! Wish you have good times. :eek:

Thank you for your work

: >

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.