• 0

QNAP как альтернатива Synology и XPEnology


Question

Всем добрый день!

Есть интересная альтернатива продуктам Synology и называется она QNAP.

Не так давно захотелось проверить есть ли возможность установить QNAP QTS (ОСь с их накопителей, демку которой можно посмотреть тут) на ПК или Виртуалку. XPEmology на vSphere уже крутится, почему бы не попробовать запустить там и QNAP QTS?

Гугление в лоб на наличие готового решения схожего с XPEnology ничего не дало. Покопав немного побольше нашлась инструкция с перепрошивкой QNAP которая позволила добиться некоторых результатов. Забегая в перед скажу, что результаты конечно же не фантан, но уже что-то.

 

Что из себя представляет инструкция по прошивки (в самой инструкции предполагается что все действия проделывается на QNAP NAT)

Нам потребуется:

- образ DSL - миниатурного Linux-дистрибутива, с возможностью загрузки из образа (или флешки, как и предлагается в самой инстукции)

- виртуальная машина с IDE-диском. т.к. scsi и sata DSL видеть отказывается

- образ прошивки. Я успел попробовал два образа, но грузиться стал только F_TS-659_20101118-1.0.9.img (TS-659 Pro, TS-659 Pro+, TS-659 Pro II)

 

Наши действия:

- создаем виртуальную машину

[spoiler=Параметры виртуальной машины].encoding = "windows-1251"

config.version = "8"

virtualHW.version = "10"

vcpu.hotadd = "TRUE"

scsi0.present = "TRUE"

scsi0.virtualDev = "lsilogic"

memsize = "1024"

mem.hotadd = "TRUE"

ide0:0.present = "TRUE"

ide0:0.fileName = "QNAP.vmdk"

ide1:0.present = "TRUE"

ide1:0.fileName = "C:\*путь_к_образу_DSL*\dsl-4.4.10-initrd.iso"

ide1:0.deviceType = "cdrom-image"

ethernet0.present = "TRUE"

ethernet0.connectionType = "nat"

ethernet0.wakeOnPcktRcv = "FALSE"

ethernet0.addressType = "generated"

usb.present = "TRUE"

ehci.present = "TRUE"

ehci.pciSlotNumber = "35"

sound.present = "TRUE"

sound.fileName = "-1"

sound.autodetect = "TRUE"

serial0.present = "TRUE"

serial0.fileType = "thinprint"

pciBridge0.present = "TRUE"

pciBridge4.present = "TRUE"

pciBridge4.virtualDev = "pcieRootPort"

pciBridge4.functions = "8"

pciBridge5.present = "TRUE"

pciBridge5.virtualDev = "pcieRootPort"

pciBridge5.functions = "8"

pciBridge6.present = "TRUE"

pciBridge6.virtualDev = "pcieRootPort"

pciBridge6.functions = "8"

pciBridge7.present = "TRUE"

pciBridge7.virtualDev = "pcieRootPort"

pciBridge7.functions = "8"

vmci0.present = "TRUE"

hpet0.present = "TRUE"

usb.vbluetooth.startConnected = "TRUE"

displayName = "QNAP"

guestOS = "other26xlinux"

nvram = "QNAP.nvram"

virtualHW.productCompatibility = "hosted"

powerType.powerOff = "soft"

powerType.powerOn = "soft"

powerType.suspend = "soft"

powerType.reset = "soft"

extendedConfigFile = "QNAP.vmxf"

floppy0.present = "FALSE"

uuid.bios = "56 4d 64 c6 ad 8b a1 57-83 9e 21 40 9f 23 cb 11"

uuid.location = "56 4d 64 c6 ad 8b a1 57-83 9e 21 40 9f 23 cb 11"

replay.supported = "FALSE"

replay.filename = ""

ide0:0.redo = ""

pciBridge0.pciSlotNumber = "17"

pciBridge4.pciSlotNumber = "21"

pciBridge5.pciSlotNumber = "22"

pciBridge6.pciSlotNumber = "23"

pciBridge7.pciSlotNumber = "24"

scsi0.pciSlotNumber = "16"

usb.pciSlotNumber = "32"

ethernet0.pciSlotNumber = "33"

sound.pciSlotNumber = "34"

vmci0.pciSlotNumber = "36"

ethernet0.generatedAddress = "00:0c:29:23:cb:11"

ethernet0.generatedAddressOffset = "0"

vmci0.id = "-1625044207"

vmotion.checkpointFBSize = "33554432"

cleanShutdown = "TRUE"

softPowerOff = "FALSE"

usb:0.present = "TRUE"

usb:0.deviceType = "hid"

usb:0.port = "0"

usb:0.parent = "-1"

usb:1.speed = "2"

usb:1.present = "TRUE"

usb:1.deviceType = "hub"

usb:1.port = "1"

usb:1.parent = "-1"

tools.syncTime = "FALSE"

 

- грузимся с образа DSL

- копируем образ F_TS-659_20101118-1.0.9.img

- форматируем в ext3 наш виртуальный диск

- переноси содержимое образа на форматированный диск

 

По сути официальная инструкция на этом заканчивается.

Перезагружаем виртуальную машину и видим что начинается загрузка QNAP QTS. Когда запросят ввести логин и пароль можно вписать admin и admin соответственно.

Пробуем найти накопитель через фирменную утилиту Qfinder и ничего не находим!

Посмотрев логи загрузки и список устройств можно обнаружить что есть проблемы с сетевой картой. И тут мои познания в области конфигурирования linux намекнули мне что самостоятельно сдвинутся с этой точки мне не получится.

 

В общем то я и пишу этот пост в надежде найти энтузиастов которых заинтересует работа над портированием QNAP QTS на виртуалки и ПК.

Если же у Вас нет желания в плотную заниматься этим вопросом, то я буду благодарен любой помощи которая заставит сдвинуть работу по портированию QNAP QTS.

 

Понимаю, что данный пост мало соотносится с тематикой форума, но если тема будет интересна и получит развитие, то я готов приобрести домен для создания на нем форума посвященного портированию QNAP QTS.

Link to post
Share on other sites

Recommended Posts

  • 0

а какой образ попробовать можно на gen8 с xeon поставить?

попробовал виртуальный 882 конвертнутый - на MSI nettop запускается, по HDMI даже визард установки появляется, но не видит вcтроенного SSD

На Gen8  загрузчик стартанул, но потом мигающий курсор и тишина

Link to post
Share on other sites
  • 0
11 минуту назад, lio666 сказал:

ща скину  образ снятый  акронисом Ораз Qnap453-A   https://yadi.sk/d/o8WFx5ZQ3RCSUM   снят с официалки

все пошел пинать друга за дрова ....смогет сразу выложу

 

спасибо!:D

//а какой образ попробовать можно на gen8 с xeon поставить?

так 882 вроде самый..

Edited by habibub
Link to post
Share on other sites
  • 0
Только что, habibub сказал:

все пошел пинать друга за дрова ....смогет сразу выложу

 

спасибо!:D

ты его попинай чтобы он дрова напихал в в 882 так как там камеры 72 штуки уже включены

Link to post
Share on other sites
  • 0
2 minutes ago, habibub said:

все пошел пинать друга за дрова ....смогет сразу выложу

 

спасибо!:D

//а какой образ попробовать можно на gen8 с xeon поставить?

так 882 вроде самый..

что то не взлетел, qfinder не находит никого, возможно из за того что сетевухи не интел

Link to post
Share on other sites
  • 0
1 минуту назад, lio666 сказал:

ты его попинай чтобы он дрова напихал в в 882 так как там камеры 72 штуки уже включены

озадачил а в твоем?

за 882 уже пнул)))трудится

  • Thanks 1
Link to post
Share on other sites
  • 0
Только что, -iliya- сказал:

что то не взлетел, qfinder не находит никого, возможно из за того что сетевухи не интел

он у меня и на интел не взлетел на мониторе установка 2 фильма подряд шла ...:lol: а сети нет:o

Link to post
Share on other sites
  • 0
19 минут назад, habibub сказал:

все пошел пинать друга за дрова ....смогет сразу выложу

 

спасибо!:D

//а какой образ попробовать можно на gen8 с xeon поставить?

так 882 вроде самый..

ставь TVS-882ST

Edited by lio666
Link to post
Share on other sites
  • 0
15 минут назад, habibub сказал:

он у меня и на интел не взлетел на мониторе установка 2 фильма подряд шла ...:lol: а сети нет:o

сетевуха не интел поэтому и не увидел  Поэтому и надо туда дрова пихать

Link to post
Share on other sites
  • 0
Только что, lio666 сказал:

сетевуха не интел поэтому и не увидел  Поэтому и надо туда дрова пихать

Lio в принципе  пофиг какой образ  структура ядра одна  x86x64  поэтому  если запихнуть дрова , тем более что в исходниках  они все есть https://sourceforge.net/projects/qosgpl/ то все будет работать , 

Link to post
Share on other sites
  • 0
Log Gen8  
iLO Advanced 2.53 at  May 03 2017
Server Name: NAS
Server Power: On

</>hpiLO-> VSP

Virtual Serial Port Active: COM1

Starting virtual serial port.
Press 'ESC (' to return to the CLI Session.

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.8 (root@BuildServerU15-40) (gcc version 4.9.2 (toolchain config: [gcc-4.9.2 binutils-2.25 glibc-2.21]) ) #1 SMP Mon Nov 28 11:11:41 CST 2016
[    0.000000] Command line: BOOT_IMAGE=/boot/bzImage root=/dev/ram0 rw
[    0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000099800-0x0000000000099bff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007dde3fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007dde4000-0x000000007ddedfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007ddee000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] C2F start from: 00000000ff800000, size: 0000000000800000
[    0.000000] Warning: PCIe ACS overrides enabled; This may allow non-IOMMU protected peer-to-peer DMA
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: user-defined physical RAM map:
[    0.000000] user: [mem 0x000000000000000000000000997ff] usable
[    0.000000] user: [mem 0x0000000000099800-0x0000000000099bff] reserved
[    0.000000] user: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] user: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] user: [mem 0x0000000000100000-0x0000000007ffffff] usable
[    0.000000] user: [mem 0x0000000008000000-0x00000000081fffff] reserved
[    0.000000] user: [mem 0x0000000008200000-0x000000007dde3fff] usable
[    0.000000] user: [mem 0x000000007dde4000-0x000000007ddedfff] ACPI data
[    0.000000] user: [mem 0x000000007ddee000-0x000000007fffffff] reserved
[    0.000000] user: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[    0.000000] user: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
[    0.000000] user: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.7 present.
[    0.000000] e820: last_pfn = 0x7dde4 max_arch_pfn = 0x400000000
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT
[    0.000000] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000] init_memory_mapping: [mem 0x7da00000-0x7dbfffff]
[    0.000000] init_memory_mapping: [mem 0x60000000-0x7d9fffff]
[    0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[    0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff]
[    0.000000] init_memory_mapping: [mem 0x08200000-0x3fffffff]
[    0.000000] init_memory_mapping: [mem 0x7dc00000-0x7dde3fff]
[    0.000000] RAMDISK: [mem 0x349ec000-0x37feffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP    )
[    0.000000] ACPI: XSDT 0x000000007DDE6400 0000AC (v01 HP     ProLiant 00000002 ▒?   0000162E)
[    0.000000] ACPI: FACP 0x000000007DDE6540 0000F4 (v03 HP     ProLiant 00000002 ▒?   0000162E)
[    0.000000] ACPI BIOS Warbug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20150619/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20150619/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150619/tbfadt-704)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20150619/tbfadt-704)
[    0.000000] ACPI: DSDT 0x000000007DDE6640 001C1A (v01 HP     DSDT     00000001 INTL 20030228)
[    0.000000] ACPI: FACS 0x000000007DDE4140 000040
[    0.000000] ACPI: FACS 0x000000007DDE4140 000040
[    0.000000] ACPI: SPCR 0x000000007DDE4180 000050 (v01 HP     SPCRRBSU 00000001 ▒?   0000162E)
[    0.000000] ACPI: MCFG 0x000000007DDE4200 00003C (v01 HP     ProLiant 00000001      00000000)
[    0.000000] ACPI: HPET 0x000000007DDE4240 000038 (v01 HP     ProLiant 00000002 ▒?   0000162E)
[    0.000000] ACPI: FFFF 0x000000007DDE4280 000064 (v02 HP     ProLiant 00000002 ▒?   0000162E)
[    0.000000] ACPI: SPMI 0x000000007DDE4300 000040 (v05 HP     ProLiant 00000001 ▒?   0000162E)
[    0.000000] ACPI: ERST 0x000000007DDE4340 000230 (v01 HP     ProLiant 00000001 ▒?   0000162E)
[    0.000000] ACPI: APIC 0x000000007DDE4580 000252 (v01 HP     ProLiant 00000002      00000000)
[    0.000000] ACPI: FFFF 0x000000007DDE4800 000176 (v01 HP     ProLiant 00000001 ▒?   0000162E)
[    0.000000] ACPI: BERT 0x000000007DDE4980 000030 (v01 HP     ProLiant 00000001 ▒?   0000162E)
[    0.000000] ACPI: HEST 0x000000007DDE49C0 0000BC (v01 HP     ProLiant 00000001 ▒?   0000162E)
[    0.000000] ACPI: DMAR 0x000000007DDE4A80 000378 (v01 HP     ProLiant 00000001 ▒?   0000162E)
[    0.000000] ACPI: FFFF 0x000000007DDE63C0 00002D (v01 HP     ProLiant 00000001      00000000)
[    0.000000] ACPI: SSDT 0x000000007DDE8280 000137 (v03 HP     CRSPCI0  00000002 HP   00000001)
[    0.000000] ACPI: SSDT 0x000000007DDE83C0 000177 (v03 HP     riser0   00000002 INTL 20030228)
[    0.000000] ACPI: x000000007DDE8540 000377 (v01 HP     pmab     00000001 INTL 20090625)
[    0.000000] ACPI: SSDT 0x000000007DDE88C0 002864 (v01 INTEL  PPM RCM  80000001 INTL 20061109)
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007dde3fff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000098fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000007ffffff]
[    0.000000]   node   0: [mem 0x0000000008200000-0x000000007dde3fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007dde3fff]
[    0.000000] ACPI: PM-Timer IO Port: 0x908
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: 64 Processors exceeds NR_CPUS limit of 32
[    0.000000] smpboot: Allowing 32 CPUs, 24 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x08000000-0x081fffff]
[    0.000000] e820: [mem 0x80000000-0xf3ffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:69940391419 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff88007b000000 s89624 r8192 d29160 u131072
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 506863
[    0.000000] Kernel command line: console=ttyS0,115200n8 no_console_suspend=1 consoleblank=0 video=HDMI-A-1:800x600@60 intel_iommu=on,igfx_off iommu=pt i915.force_dp_to_hdmi=1 i915.disable_power_well=0 i915.enable_hd_vgaarb=1 pcie_acs_override=downstream noxsaves memmap=2M$0x8000000 ramoops.mem_address=0x8000000 ramoops.mem_size=0x200000 ramoops.console_size=0x100000 BOOT_IMAGE=/boot/bzImage root=/dev/ram0 rw
[    0.000000] DMAR: IOMMU enabled
[    0.000000] DMAR: Disable GFX device mapping
[    0.000000] Setting dangerous option i915.force_dp_to_hdmi - tainting kernel
[    0.000000] Setting dangerous option i915.disable_power_well - tainting kernel
[    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 126976 bytes
[    0.000000] log_buf_len min size: 131072 bytes
[    0.000000] log_buf_len: 262144 bytes
[    0.000000] early log buf free: 119256(90%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Memory: 1946908K/2059760K available (10067K kernel code, 1313K rwdata, 3464K rodata, 1540K init, 808K bss, 112852K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000] NR_IRQS:4352 nr_irqs:680 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3392.268 MHz processor
[    0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.53 BogoMIPS (lpj=3392268)
[    0.003579] pid_max: default: 32768 minimum: 301
[    0.005183] ACPI: Core revision 20150619
[    0.008040] ACPI: All ACPI Tables successfully acquired
[    0.010062] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.012286] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.014880] Initializing cgroup subsys blkio
[    0.016392] Initializing cgroup subsys memory
[    0.017894] Initializing cgroup subsys devices
[    0.019384] Initializing cgroup subsys freezer
[    0.020900] CPU: Physical Processor ID: 0
[    0.022253] CPU: Processor Core ID: 0
[    0.023498] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.025529] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028204] mce: CPU supports 9 MCE banks
[    0.029587] CPU0: Thermal monitoring enabled (TM1)
[    0.031422] process: using mwait in idle threads
[    0.032974] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.034872] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.037285] Freeing SMP alternatives memory: 40K (ffffffff82005000 - ffffffff8200f000)
[    0.040100] Switched APIC routing to physical flat.
[    0.042110] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.054424] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[    0.057701] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Broken BIOS detected, complain to your hardware vendor.
[    0.062667] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
[    0.065319] Intel PMU driver.
[    0.066322] ... version:                3
[    0.067650] ... bit width:              48
[    0.069043] ... generic registers:      4
[    0.070402] ... value mask:             0000ffffffffffff
[    0.072154] ... max period:             0000ffffffffffff
[    0.073916] ... fixed-purpose events:   3
[    0.075412] ... event mask:             000000070000000f
[    0.078033] x86: Booting SMP configuration:
[    0.079464] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7
[    0.106640] x86: Booted up 1 node, 8 CPUs
[    0.108143] smpboot: Total of 8 processors activated (54276.28 BogoMIPS)
[    0.115664] devtmpfs: initialized
[    0.117178] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.120476] xor: automatically using best checksumming function:
[    0.132573]    avx       : 32688.000 MB/sec
[    0.134034] pinctrl core: initialized pinctrl subsystem
[    0.135853] RTC time: 19:08:30, date: 01/04/18
[    0.137419] NET: Registered protocol family 16
[    0.139090] ramoops: using module parameters
[    0.140937] console [pstore-1] enabled
[    0.142237] pstore: Registered ramoops as persistent store backend
[    0.144740] ramoops: attached 0x200000@0x8000000, ecc: 0/0
[    0.153619] cpuidle: using governor ladder
[    0.160151] cpuidle: using governor menu
[    0.161621] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.164230] ACPI: bus type PCI registered
[    0.165577] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.167712] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.170834] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.173078] PCI: Using configuration type 1 for base access
[    0.175216] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.196945] raid6: sse2x1   gen()  9890 MB/s
[    0.214966] raid6: sse2x1   xor()  7820 MB/s
[    0.232990] raid6: sse2x2   gen() 12292 MB/s
[    0.251011] raid6: sse2x2   xor()  8824 MB/s
[    0.269062] raid6: sse2x4   gen() 14222 MB/s
[    0.287084] raid6: sse2x4   xor() 10654 MB/s
[    0.288570] raid6: using algorithm sse2x4 gen() 14222 MB/s
[    0.290408] raid6: .... xor() 10654 MB/s, rmw enabled
[    0.292077] raid6: using ssse3x2 recovery algorithm
[    0.293791] ACPI: Added _OSI(Module Device)
[    0.295223] ACPI: Added _OSI(Processor Device)
[    0.296696] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.298264] ACPI: Added _OSI(Processor Aggregator Device)
[    0.301603] ACPI: Interpreter enabled
[    0.302873] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    0.306082] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.309523] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
[    0.312635] ACPI: (supports S0 S4 S5)
[    0.313862] ACPI: Using IOAPIC for interrupt routing
[    0.315745] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.320680] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-14])
[    0.322769] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.325625] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
[    0.328537] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.331723] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.334362] acpi PNP0A08:00: _OSC: platform willing to grant []
[    0.336332] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.338458] acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff window]; [mem 0xfed00000-0xfed44fff window] ignored
[    0.342528] PCI host bridge to bus 0000:00
[    0.343924] pci_bus 0000:00: root bus resource [bus 00-14]
[    0.345779] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff window]
[    0.348305] pci_bus 0000:00: root bus resource [io  0x1000-0xffff window]
[    0.350908] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.353142] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.355483] pci_bus 0000:00: root bus resource [io  0x0d00-0x0fff window]
[    0.357714] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff window]
[    0.360176] pci_bus 0000:00: root bus resource [io  0x03b0-0x03bb window]
[    0.362407] pci_bus 0000:00: root bus resource [io  0x03c0-0xf window]
[    0.464886] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.467908] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    0.469516] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    0.471850] pci 0000:00:1c.4: Enabling MPC IRBNCE
[    0.473463] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[    0.475937] pci 0000:00:1c.6: Enabling MPC IRBNCE
[    0.477756] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled
[    0.480286] pci 0000:00:1c.7: Enabling MPC IRBNCE
[    0.481848] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[    0.484665] pci 0000:00:01.0: PCI bridge to [bus 07]
[    0.486409] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.488105] pci 0000:00:1c.0: PCI bridge to [bus 0d]
[    0.491851] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.495606] pci 0000:00:1c.6: PCI bridge to [bus 04]
[    0.500298] pci 0000:00:1c.7: PCI bridge to [bus 01]
[    0.502026] pci 0000:00:1e.0: PCI bridge to [bus 14] (subtractive decode)
[    0.504587] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
[    0.506780] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
[    0.509263] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 *11)
[    0.511580] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[    0.513849] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
[    0.516155] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *3
[    0.518158] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
[    0.520820] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
[    0.523325] SCSI subsystem initialized
[    0.524747] ACPI: bus type USB registered
[    0.526090] usbcore: registered new interface driver usbfs
[    0.527903] usbcore: registered new interface driver hub
[    0.529717] usbcore: registered new device driver usb
[    0.531413] Linux video capture interface: v2.00
[    0.532949] pps_core: LinuxPPS API ver. 1 registered
[    0.534665] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.537712] PTP clock support registered
[    0.539203] vgaarb: setting as boot device: PCI:0000:01:00.1
[    0.541195] vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
[    0.544402] vgaarb: loaded
[    0.545384] vgaarb: bridge control possible 0000:01:00.1
[    0.547153] Advanced Linux Sound Architecture Driver Initialized.
[    0.549166] PCI: Using ACPI for IRQ routing
[    0.551992] Bluetooth: Core ver 2.20
[    0.553221] NET: Registered protocol family 31
[    0.554796] Bluetooth: HCI device and connection manager initialized
[    0.557017] Bluetooth: HCI socket layer initialized
[    0.558652] Bluetooth: L2CAP socket layer initialized
[    0.560335] Bluetooth: SCO socket layer initialized
[    0.561987] cfg80211: World regulatory domain updated:
[    0.563733] cfg80211:  DFS Master region: unset
[    0.5652 cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    0.668633] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.671500] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.674143] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    0.676818] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    0.679904] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    0.682986] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    0.685844] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.688483] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    0.691475] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.693917] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.697924] clocksource: Switched to clocksource hpet
[    0.704241] FS-Cache: Loaded
[    0.705290] CacheFiles: Loaded
[    0.706357] pnp: PnP ACPI init
[    0.707534] system 00:00: [io  0x0408-0x040f] has been reserved
[    0.709517] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.711465] system 00:00: [io  0x0310-0x0313] has been reserved
[    0.713435] system 00:00: [io  0x0316-0x0317] has been reserved
[    0.715568] system 00:00: [io  0x0700-0x071f] has been reserved
[    0.717538] system 00:00: [io  0x0880-0x08ff] has been reserved
[    0.719494] system 00:00: [io  0x0900-0x097f] has been reserved
[    0.721435] system 00:00: [io  0x0cd4-0x0cd7] has been reserved
[    0.723374] system 00:00: [io  0x0cd0-0x0cd3] has been reserved
[    0.725352] system 00:00: [io  0x0f50-0x0f58] has been reserved
[    0.727316] system 00:00: [io  0x0ca0-0x0ca1] has been reserved
[    0.729284] system 00:00: [io  0x0ca4-0x0ca5] has been reserved
[    0.731227] system 00:00: [io  0x03f8-0x03ff] has been reserved
[    0.733293] system 00:00: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.735721] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.737901] system 00:00: [mem 0xfed90000-0xfed91fff] has been reserved
[    0.740266] pnp: PnP ACPI: found 5 devices
[    0.747528] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.750526] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8000000-0xf80fffff]
[    0.752784] pci 0000:00:01.0: PCI bridge to [bus 07]
[    0.754532] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.756171] pci 0000:00:1c.0: PCI bridge to [bus 0d]
[    0.758039] pci 0000:03:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
[    0.760392] pci 0000:03:00.1: BAR 6: assigned [mem 0xf8020000-0xf803ffff pref]
[    0.762722] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.764547] pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf80fffff]
[    0.766990] pci 0000:00:1c.4:   bridge window [mem 0xfab00000-0xfabfffff 64bit pref]
[    0.769542] pci 0000:00:1c.6: PCI bridge to [bus 04]
[    0.771142] pci 0000:00:1c.6:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.773384] pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref]
[    0.775850] pci 0000:00:1c.7: PCI bridge to [bus 01]
[    0.777501] pci 0000:00:1c.7:   bridge window [io  0x3000-0x3fff]
[    0.779599] pci 0000:00:1c.7:   bridge window [mem 0xfad00000-0xfbefffff]
[    0.781843] pci 0000:00:1c.7:   bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
[    0.784475] pci 0000:00:1e.0: PCI bridge to [bus 14]
[    0.786221] NET: Registered protocol family 2
[    0.787843] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.790260] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.792719] TCP: Hash tables configured (established 16384 bind 16384)
[    0.794995] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.797080] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.799504] NET: Registered protocol family 1
[    0.801044] RPC: Registered named UNIX socket transport module.
[    0.803021] RPC: Registered udp transport module.
[    0.804691] RPC: Registered tcp transport module.
[    0.806243] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.830360] Trying to unpack rootfs image as initramfs...
[    8.064471] Freeing initrd memory: 55312K (ffff8800349ec000 - ffff880037ff0000)
[    8.066935] DMAR: Host address width 39
[    8.068326] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    8.070123] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f010da
[    8.072710] DMAR: RMRR base: 0x0000007dffd000 end: 0x0000007dffffff
[    8.074785] DMAR: RMRR base: 0x0000007dff6000 end: 0x0000007dffcfff
[    8.076836] DMAR: RMRR base: 0x0000007df93000 end: 0x0000007df94fff
[    8.079000] DMAR: RMRR base: 0x0000007df8f000 end: 0x0000007df92fff
[    8.081062] DMAR: RMRR base: 0x0000007df7f000 end: 0x0000007df8efff
[    8.083179] DMAR: RMRR base: 0x0000007df7e000 end: 0x0000007df7efff
[    8.085239] DMAR: RMRR base: 0x000000000f4000 end: 0x000000000f4fff
[    8.087322] DMAR: RMRR base: 0x000000000e8000 end: 0x000000000e8fff
[    8.089436] DMAR: RMRR base: 0x0000007ddee000 end: 0x0000007ddeefff
[    8.091516] DMAR: No ATSR found
[    8.092663] DMAR: dmar0: Using Queued invalidation
[    8.094375] DMAR: Hardware identity mapping for device 0000:00:00.0
[    8.096451] DMAR: Hardware identity mapping for device 0000:00:01.0
[    8.098613] DMAR: Hardware identity mapping for device 0000:00:06.0
[    8.100675] DMAR: Hardware identity mapping for device 0000:00:1a.0
[    8.102735] DMAR: Hardware identity mapping for device 0000:00:1c.0
[    8.104800] DMAR: Hardware identity mapping for device 0000:00:1c.4
[    8.106850] DMAR: Hardware identity mapping for device 0000:00:1c.6
[    8.108971] DMAR: Hardware identity mapping for device 0000:00:1c.7
[    8.110994] DMAR: Hardware identity mapping for device 0000:00:1d.0
[    8.113004] DMAR: Hardware identity mapping for device 0000:00:1f.0
[    8.115015] DMAR: Hardware identity mapping for device 0000:04:00.0
[    8.117036] DMAR: Hardware identity mapping for device 0000:01:00.1
[    8.119167] DMAR: Hardware identity mapping for device 0000:01:00.4
[    8.121237] DMAR: Setting RMRR:
[    8.122293] DMAR: Setting identity map for device 0001:00.0 [0x7ddee000 - 0x7ddeefff]
[    8.225021] DMAR: Setting identity map for device 0000:01:00.2 [0x7ddee000 - 0x7ddeefff]
[    8.227711] DMAR: Ignoring identity map for HW passthrough device 0000:01:00.4 [0x7ddee000 - 0x7ddeefff]
[    8.230917] DMAR: Setting identity map for device 0000:00:1f.2 [0xe8000 - 0xe8fff]
[    8.233430] DMAR: Setting identity map for device 0000:03:00.0 [0xe8000 - 0xe8fff]
[    8.235909] DMAR: Setting identity map for device 0000:03:00.1 [0xe8000 - 0xe8fff]
[    8.238489] DMAR: Ignoring identity map for HW passthrough device 0000:04:00.0 [0xe8000 - 0xe8fff]
[    8.241444] DMAR: Setting identity map for device 0000:01:00.0 [0xe8000 - 0xe8fff]
[    8.243909] DMAR: Setting identity map for device 0000:01:00.2 [0xe8000 - 0xe8fff]
[    8.246406] DMAR: Setting identity map for device 0000:00:1f.2 [0xf4000 - 0xf4fff]
[    8.248939] DMAR: Setting identity map for device 0000:03:00.0 [0xf4000 - 0xf4fff]
[    8.251432] DMAR: Setting identity map for device 0000:03:00.1 [0xf4000 - 0xf4fff]
[    8.253917] DMAR: Ignoring identity map for HW passthrough device 0000:04:00.0 [0xf4000 - 0xf4fff]
[    8.256822] DMAR: Setting identity map for device 0000:01:00.0 [0xf4000 - 0xf4fff]
[    8.259391] DMAR: Setting identity map for device 0000:01:00.2 [0xf4000 - 0xf4fff]
[    8.262138] DMAR: Setting identity map for device 0000:00:1f.2 [0x7df7e000 - 0x7df7efff]
[    8.264778] DMAR: Setting identity map for device 0000:03:00.0 [0x7df7e000 - 0x7df7efff]
[    8.267525] DMAR: Setting identity map for device 0000:03:00.1 [0x7df7e000 - 0x7df7efff]
[    8.270393] DMAR: Ignoring identity map for HW passthrough device 0000:04:00.0 [0x7df7e000 - 0x7df7efff]
[    8.273484] DMAR: Setting identity map for device 0000:01:00.0 [0x7df7e000 - 0x7df7efff]
[    8.276088] DMAR: Setting identity map for device 0000:01:00.2 [0x7df7e000 - 0x7df7efff]
[    8.278733] DMAR: Setting identity map for device 0000:00:1f.2 [0x7df7f000 - 0x7df8efff]
[    8.281353] DMAR: Setting identity map for device 0000:03:00.0 [0f7f000 - 0x7df8efff]
[    8.384077] DMAR: Setting identity map for device 0000:03:00.1 [0x7df7f000 - 0x7df8efff]
[    8.386948] DMAR: Ignoring identity map for HW passthrough device 0000:04:00.0 [0x7df7f000 - 0x7df8efff]
[    8.390154] DMAR: Setting identity map for device 0000:01:00.0 [0x7df7f000 - 0x7df8efff]
[    8.392791] DMAR: Setting identity map for device 0000:01:00.2 [0x7df7f000 - 0x7df8efff]
[    8.395473] DMAR: Setting identity map for device 0000:00:1f.2 [0x7df8f000 - 0x7df92fff]
[    8.398235] DMAR: Setting identity map for device 0000:03:00.0 [0x7df8f000 - 0x7df92fff]
[    8.400884] DMAR: Setting identity map for device 0000:03:00.1 [0x7df8f000 - 0x7df92fff]
[    8.403544] DMAR: Ignoring identity map for HW passthrough device 0000:04:00.0 [0x7df8f000 - 0x7df92fff]
[    8.406640] DMAR: Setting identity map for device 0000:01:00.0 [0x7df8f000 - 0x7df92fff]
[    8.409372] DMAR: Setting identity map for device 0000:01:00.2 [0x7df8f000 - 0x7df92fff]
[    8.412003] DMAR: Setting identity map for device 0000:00:1f.2 [0x7df93000 - 0x7df94fff]
[    8.414646] DMAR: Setting identity map for device 0000:03:00.0 [0x7df93000 - 0x7df94fff]
[    8.417322] DMAR: Setting identity map for device 0000:03:00.1 [0x7df93000 - 0x7df94fff]
[    8.420006] DMAR: Ignoring identity map for HW passthrough device 0000:04:00.0 [0x7df93000 - 0x7df94fff]
[    8.423102] DMAR: Setting identity map for device 0000:01:00.0 [0x7df93000 - 0x7df94fff]
[    8.425701] DMAR: Setting identity map for device 0000:01:00.2 [0x7df93000 - 0x7df94fff]
[    8.428398] DMAR: Setting identity map for device 0000:01:00.0 [0x7dff6000 - 0x7dffcfff]
[    8.431030] DMAR: Setting identity map for device 0000:01:00.2 [0x7dff6000 - 0x7dffcfff]
[    8.433714] DMAR: Ignoring identity map for HW passthrough device 0000:01:00.4 [0x7dff6000 - 0x7dffcfff]
[    8.436810] DMAR: Ignoring identity map for HW passthrough device 0000:00:1a.0 [0x7dffd000 - 0x7dffffff]
[    8.439991] DMAR: Ignoring identity map for HW passthrough device 0000:00:1d.0 [0xfd000 - 0x7dffffff]
[    8.543190] DMAR: Prepare 0-16MiB unity mapping for LPC
[    8.544923] DMAR: Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff]
[    8.547848] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    8.550034] iommu: Adding device 0000:00:00.0 to group 0
[    8.551824] iommu: Adding device 0000:00:01.0 to group 1
[    8.553581] iommu: Adding device 0000:00:06.0 to group 2
[    8.555342] iommu: Adding device 0000:00:1a.0 to group 3
[    8.557067] iommu: Adding device 0000:00:1c.0 to group 4
[    8.558915] iommu: Adding device 0000:00:1c.4 to group 5
[    8.560723] iommu: Adding device 0000:00:1c.6 to group 6
[    8.562484] iommu: Adding device 0000:00:1c.7 to group 7
[    8.564244] iommu: Adding device 0000:00:1d.0 to group 8
[    8.565975] iommu: Adding device 0000:00:1e.0 to group 9
[    8.567778] iommu: Adding device 0000:00:1f.0 to group 10
[    8.569667] iommu: Adding device 0000:00:1f.2 to group 10
[    8.571497] iommu: Adding device 0000:03:00.0 to group 11
[    8.573321] iommu: Adding device 0000:03:00.1 to group 11
[    8.575074] iommu: Adding device 0000:04:00.0 to group 12
[    8.576884] iommu: Adding device 0000:01:00.0 to group 13
[    8.578752] iommu: Adding device 0000:01:00.1 to group 13
[    8.580552] iommu: Adding device 0000:01:00.2 to group 13
[    8.582328] iommu: Adding device 0000:01:00.4 to group 13
[    8.584207] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    8.587120] hw unit of domain pp0-core 2^-16 Joules
[    8.588843] hw unit of domain package 2^-16 Joules
[    8.590443] hw unit of domain pp1-gpu 2^-16 Joules
[    8.592025] Machine check injector initialized
[    8.593549] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1c
[    8.595491] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1c
[    8.597443] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1c
[    8.599431] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1c
[    8.601353] microcode: CPU4 sig=0x306 pf=0x2, revision=0x1c
[    8.703431] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1c
[    8.705348] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1c
[    8.707467] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1c
[    8.709487] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    8.712553] Scanning for low memory corruption every 60 seconds
[    8.715009] futex hash table entries: 8192 (order: 7, 524288 bytes)
[    8.717489] audit: initializing netlink subsys (disabled)
[    8.719318] audit: type=2000 audit(1515092917.649:1): initialized
[    8.721475] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    8.723718] VFS: Disk quotas dquot_6.6.0
[    8.725066] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    8.727711] FS-Cache: Netfs 'nfs' registered for caching
[    8.729645] NFS: Registering the id_resolver key type
[    8.731358] Key type id_resolver registered
[    8.732742] Key type id_legacy registered
[    8.734068] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    8.736325] Key type cifs.spnego registered
[    8.737774] fuse init (API version 7.23)
[    8.739875] bounce: pool size: 64 pages
[    8.741471] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    8.743946] io scheduler noop registered
[    8.745297] io scheduler deadline registered
[    8.746729] io scheduler cfq registered (default)
[    8.748948] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    8.750848] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    8.753067] ipmi message handler version 39.2
[    8.754530] ipmi device interface
[    8.755669] IPMI System Interface driver.
[    8.757003] ipmi_si: probing via ACPI
[    8.758325] ipmi_si 00:01: [io  0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
[    8.760547] ipmi_si: Adding ACPI-specified kcs state machine
[    8.762683] ipmi_si: probing via SMBIOS
[    8.763937] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[    8.765856] ipmi_si: Adg SMBIOS-specified kcs state machine duplicate interface
[    8.868442] ipmi_si: probing via SPMI
[    8.869622] ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
[    8.871478] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
[    8.873846] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[    8.999946] ipmi_si 00:01: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
[    9.002745] ipmi_si 00:01: IPMI kcs interface initialized
[    9.004691] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    9.007130] ACPI: Power Button [PWRF]
[    9.009015] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
▒[    9.276030] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    9.279301] Non-volatile memory driver v1.3
[    9.280947] Linux agpgart interface v0.103
[    9.282478] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    9.284537] AMD IOMMUv2 functionality not available on this system
[    9.288321] brd: module loaded
[    9.311982] loop: module loaded
[    9.313351] nbd: registered device at major 43
[    9.315909] ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092F conflicts with OpRegion 0x0000000000000920-0x000000000000092F (\SGPE) (20150619/utaddress-254)
[    9.321312] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.324734] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.326886] rdac: device handler registered
[    9.328382] SCSI Media Changer driver v0.25
[    9.330024] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    9.333376] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    9.336128] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems apst
[    9.349517] scsi host0: ahci
[    9.350703] scsi host1: ahci
[    9.351843] scsi host2: ahci
[    9.352951] scsi host3: ahci
[    9.354126] scsi host4: ahci
[    9.355291] scsi host5: ahci
[    9.356372] ata1: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0100 irq 27
[    9.358968] ata2: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0180 irq 27
[    9.361481] ata3: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0200 irq 27
[    9.364099] ata4: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0280 irq 27
[    9.366554] ata5: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0300 irq 27
[    9.369100] ata6: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0380 irq 27
[    9.371704] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[    9.376312] serio: i8042 KBD port at 0x60,0x64 irq 1
[    9.378032] serio: i8042 AUX port at 0x60,0x64 irq 12
[    9.379955] mousedev: PS/2 mouse device common for all mice
[    9.382184] rtc_cmos 00:02: RTC can wake from S4
[    9.383913] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    9.386012] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
[    9.388755] i2c /dev entries driver
[    9.390022] [i2c-mv9235.ko]: Module init
[    9.391397] [i2c-mv9235.ko]:i2c_mv9235_init(1122) enable list
[    9.393416] lirc_dev: IR Remote Control driver registered, major 247
[    9.395627] IR RC6 protocol handler initialized
[    9.397182] IR MCE Keyboard/mouse protocol handler initialized
[    9.399238] IR LIRC bridge handler initialized
[    9.400804] md: linear personality registered for level -1
[    9.402923] md: raid0 personality registered for level 0
[    9.404718] md: raid1 personality registered for level 1
[    9.406521] md: raid10 personality registered for level 10
[    9.408503] md: raid6 personality registered for level 6
[    9.410291] md: raid5 personality registered for level 5
[    9.412124] md: raid4 personality registered for level 4
[    9.413890] md: multipath personality registered for level -4
[    9.416472] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    9.419773] device-mapper: multipath: version 1.9.0 loaded
[    9.421669] device-mapper: multipath round-robin: version 1.0.0 loaded
[    9.423891] device-mapper: multipath queue-length: version 0.1.0 loaded
[    9.426131]vice-mapper: multipath service-time: version 0.2.0 loaded
[    9.528559] usbcore: registered new interface driver btusb
[    9.530438] sdhci: Secure Digital Host Controller Interface driver
[    9.532576] sdhci: Copyright(c) Pierre Ossman
[    9.534342] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    9.536448] wbsd: Copyright(c) Pierre Ossman
[    9.538088] usbcore: registered new interface driver usbhid
[    9.540038] usbhid: USB HID core driver
[    9.541360] [drm] Initialized drm 1.1.0 20060810
[    9.543359] drop_monitor: Initializing network drop monitor service
[    9.545696] Netfilter messages via NETLINK v0.30.
[    9.547323] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    9.549522] ctnetlink v0.93: registering with nfnetlink.
[    9.551446] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.553263] Initializing XFRM netlink socket
[    9.554725] NET: Registered protocol family 17
[    9.556239] NET: Registered protocol family 5
[    9.557723] Key type dns_resolver registered
[    9.559758] registered taskstats version 1
[    9.561660]   Magic number: 2:349:141
[    9.563040] block ram6: hash matches
[    9.564341] acpi device:12: hash matches
[    9.566738] ALSA device list:
[    9.567803]   No soundcards found.
[    9.584048] tsc: Refined TSC clocksource calibration: 3392.293 MHz
[    9.613152] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5de2a436, max_idle_ns: 440795285127 ns
[    9.833167] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[    9.864349] ata1.00: ATA-8: HGST HDN724040ALE640, MJAOA5E0, max UDMA/133
[    9.895828] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    9.931707] ata1.00: configured for UDMA/133
[    9.952029] Check proc_name[ahci].
[    9.968096] scsi 0:0:0:0: Direct-Access     HGST     HDN724040ALE640  MJAO PQ: 0 ANSI: 5
[   10.006308] ata1.00: set queue depth = 31
[   10.025415] Check proc_name[ahci].
[   10.041609] Check proc_name[ahci].
[   10.057612] Check proc_name[ahci].
[   10.073852] Check proc_name[ahci].
[   10.073990] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[   10.073991] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   10.074178] sd 0:0:0:0: [sda] Write Protect is off
[   10.074237] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   10.217070] Check proc_name[ahci].
[   10.233144] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.280690]  sda: sda1 sda2
[   10.294150] sd 0:0:0:0: [sda] Attached SCSI disk
[   10.315892] Check proc_name[ahci].
[   10.565507] ata2: SATA link down (SStatus 0 SControl 330)
[   10.660742] clocksource: Switched to clocksource tsc
[   10.897658] ata3: SATA link down (SStatus 0 SControl 330)
[   11.227809] ata4: SATA link down (SStatus 0 SControl 330)
[   11.713031] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[   11.754213] ata5.00: ATA-8: ADATA SP900, 5.6.0, max UDMA/133
[   11.781172] ata5.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[   11.826828] ata5.00: configured for UDMA/133
[   11.847938] Check proc_name[ahci].
[   11.864030] scsi 4:0:0:0: Direct-Access     ADATA    SP900            5.6. PQ: 0 ANSI: 5
[   11.902406] ata5.00: set queue depth = 31
[   11.921308] Check proc_name[ahci].
[   11.937261] Check proc_name[ahci].
[   11.953276] Check proc_name[ahci].
[   11.969242] Check proc_name[ahci].
[   11.969360] sd 4:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[   11.969595] sd 4:0:0:0: [sdb] Write Protect is off
[   11.969651] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   11.971336]  sdb:
[   11.971540] sd 4:0:0:0: [sdb] Attached SCSI disk
[   11.971541] Check proc_name[ahci].
[   12.133199] Check proc_name[ahci].
[   12.149413] sd 4:0:0:0: Attached scsi generic sg1 type 0
[   12.479387] ata6: SATA link down (SStatus 0 SControl 330)
[   12.505139] Freeing unused kernel memory: 1540K (ffffffff81e84000 - ffffffff82005000)
[   12.725184] RTC_TIME:Thu Jan  4 19:08:43 2018  0.000000 seconds
[   12.755262] has_svm: not amd
[   12.768829] kvm: no hardware support
[   12.801227] tun: Universal TUN/TAP device driver, 1.6
[   12.825208] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   12.857292] NET: Registered protocol family 10
[   12.880635] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   12.946301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   12.977549] ehci-pci: EHCI PCI platform driver
[   12.998745] ehci-pci 0000:00:1a.0: EHCI Host Controller
[   13.023599] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   13.058641] ehci-pci 0000:00:1a.0: debug port 2
[   13.083949] ehci-pci 0000:00:1a.0: irq 21, io mem 0xfacf0000
[   13.116671] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[   13.143942] hub 1-0:1.0: USB hub found
[   13.161741] hub 1-0:1.0: 2 ports detected
[   13.180769] ehci-pci 0000:00:1d.0: EHCI Host Controller
[   13.205463] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   13.240351] ehci-pci 0000:00:1d.0: debug port 2
[   13.265645] ehci-pci 0000:00:1d.0: irq 20, io mem 0xface0000
[   13.297759] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[   13.325142] hub 2-0:1.0: USB hub found
[   13.342951] hub 2-0:1.0: 2 ports detected
[   13.362588] uhci_hcd: USB Universal Host Controller Interface driver
[   13.392957] uhci_hcd 0000:01:00.4: UHCI Host Controller
[   13.417840] uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
[   13.452857] uhci_hcd 0000:01:00.4: detected 8 ports
[   13.475924] uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
[   13.495827] usb 1-1: new high-speed USB device number 2 using ehci-pci
[   13.540730] uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
[   13.568205] hub 3-0:1.0: USB hub found
[   13.586035] hub 3-0:1.0: 2 ports detected
[   13.605546] usbcore: registered new interface driver usblp
[   13.632629] hub 1-1:1.0: USB hub found
[   13.633759] xhci_hcd 0000:04:00.0: xHCI Host Controller
[   13.633762] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[   13.639191] xhci_hcd 0000:04:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000010
[   13.639536] hub 4-0:1.0: USB hub found
[   13.639554] hub 4-0:1.0: 2 ports detected
[   13.639651] xhci_hcd 0000:04:00.0: xHCI Host Controller
[   13.639654] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
[   13.642599] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[   13.642721] hub 5-0:1.0: USB hub found
[   13.642737] hub 5-0:1.0: 2 ports detected
[   13.643687] usbcore: registered new interface driver usb-storage
[   13.646294] mpt2sas version 20.100.00.00 loaded
[   13.647335] mpt3sas version 13.00.00.00 loaded
[   13.648369] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.1-NAPI
[   13.648370] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   13.649160] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
[   13.649160] igb: Copyright (c) 2007-2014 Intel Corporation.
[   13.650857] usbcore: registered new interface driver r8152
[   13.909020] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[   14.177641] usb 2-1: new high-speed USB device number 2 using ehci-pci
[   14.177755] hub 1-1:1.0: 6 ports detected
[   14.192558] input: BMC Virtual Keyboard  as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.0/0003:03F0:7029.0001/input/input3
[   14.228323] hid-generic 0003:03F0:7029.0001: input: USB HID v1.01 Keyboard [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input0
[   14.232572] input: BMC Virtual Keyboard  as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.1/0003:03F0:7029.0002/input/input4
[   14.232836] hid-generic 0003:03F0:7029.0002: input: USB HID v1.01 Mouse [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input1
[   14.405881] hub 2-1:1.0: USB hub found
[   14.405949] hub 2-1:1.0: 6 ports detected
[   14.508300] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[   14.510128] device-mapper: tier-algo: dm_tier_algo_register: algorithm btier registration success
[   14.511167] flashcache: flashcache-3.1.1-7.2 initialized
[   14.541162] drbd: initialized. Version: 8.4.5 (api:1/proto:86-101)
[   14.541162] drbd: GIT-hash: 1d360bde0e095d495786eaeb2a1ac76888e4db96 build by @BuildServerU15-40, 2016-11-28 11:57:00
[   14.541162] drbd: registered as block device major 147
[   14.542852] usbcore: registered new interface driver usbserial
[   14.543390] usbcore: registered new interface driver pl2303
[   14.543396] usbserial: USB Serial support registered for pl2303
[   14.543966] jnl: driver (UFSD_HEAD QNAP, LBD=OFF) loaded at ffffffffa0445000
[   14.583473] ufsd: module license 'Commercial product' taints kernel.
[   14.583474] Disabling lock debugging due to kernel taint
[   14.583930] ufsd: driver (UFSD_HEAD QNAP, acl, ioctl, sd2(5), car) loaded at ffffffffa0451000
[   14.583930] NTFSJ support included
[   14.583930] exFAT support included
[   14.583930] Hfs+ support included
[   14.583930] Build_for__QNAP_TS-451_k4.2.6_2015-12-23_lke_9.4.3_b151
[   15.026368] udevd (1894): /proc/1894/oom_adj is deprecated, please use /proc/1894/oom_score_adj instead.
[   15.071843] udev: starting version 140
[   15.077576] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[   15.122867] FAT-fs (sda1): Unrecognized mount option "data=ordered" or missing value
[   15.160229] FAT-fs (sda1): Unrecognized mount option "data=ordered" or missing value
[   15.197209] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[   15.241230] hub 2-1.3:1.0: USB hub found
[   15.260097] hub 2-1.3:1.0: 2 ports detected
[   15.343806] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[   15.374099] scsi host6: usb-storage 1-1.3:1.0
[   16.395997] Check proc_name[usb-storage].
[   16.415181] scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer Edge      1.26 PQ: 0 ANSI: 6
[   16.453995] Check proc_name[usb-storage].
[   16.473019] Check proc_name[usb-storage].
[   16.492203] Check proc_name[usb-storage].
[   16.511457] Check proc_name[usb-storage].
[   16.530762] Check proc_name[usb-storage].
[   16.549964] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   16.575941] sd 6:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[   16.612107] Check proc_name[usb-storage].
[   16.632236] sd 6:0:0:0: [sdc] Write Protect is off
[   16.655996] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   16.705143]  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
[   16.732270] sd 6:0:0:0: [sdc] Attached SCSI disk
[   16.754391] Check proc_name[usb-storage].
[   18.154998] usb 1-1.5: new low-speed USB device number 5 using ehci-pci
[   18.356685] hid-generic 0003:0D9F:0004.0003: hiddev0: USB HID v1.00 Device [POWERCOM Co.,LTD HID UPS Battery] on usb-0000:00:1a.0-1.5/input0
[   77.993077] random: pvscan urandom read with 127 bits of entropy available
[   81.508660] random: nonblocking pool is initialized
[   89.988749] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   90.015310] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[   90.057829] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   90.093991] fnotify: Load file notify kernel module.
[   90.117997] fnotify: Launch the fnotify thread: 18446612134366307136
[   91.167154] snd_usb_audio: unknown parameter 'qnap_start_index' ignored
[   91.199140] usbcore: registered new interface driver snd-usb-audio
[   91.229534] usbcore: registered new interface driver snd-usb-caiaq
[   91.261550] usbcore: registered new interface driver uvcvideo
[   91.288765] USB Video Class driver (1.1.1)
[   91.327758] 8021q: 802.1Q VLAN Support v1.8
acpid: starting up with netlink and the input layer
acpid: skipping conf file /etc/acpi/events/acpi_hal.conf
acpid: skipping conf file /etc/acpi/events/acpi.conf
acpid: skipping conf file /etc/acpi/events/acpi_qnap.conf
acpid: 2 rules loaded
acpid: waiting for events: event logging is off
[  116.650365] Bridge firewalling registered
[  132.348810] Fail to find system_bus_socket... Restart dbus!
[  133.695388] Fail to find system_bus_socket... Restart dbus!
[  135.016663] Fail to find system_bus_socket... Restart dbus!
[  136.371523] Fail to find system_bus_socket... Restart dbus!
[  137.740352] Fail to find system_bus_socket... Restart dbus!
[  156.274154] Fail to find system_bus_socket... Restart dbus!
[  156.286529] Fail to find system_bus_socket... Restart dbus!
[  157.599047] Fail to find system_bus_socket... Restart dbus!
[  157.654810] Fail to find system_bus_socket... Restart dbus!
daemon_mgr PID 5525/5524


Welcome to use the QNAP's products.

NAS login: [  187.935922] Fail to find system_bus_socket... Restart dbus!
Hide  

Вот снял лог с моего Gen8 при загрузке 882

далее постоянно выдает Fail to find system_bus_socket... Restart dbus!

 

 

Link to post
Share on other sites
  • 0
21 минуту назад, lio666 сказал:

ждем результатов

 

23 минуты назад, habibub сказал:

озадачил а в твоем?

за 882 уже пнул)))трудится

в моем 4

Link to post
Share on other sites
  • 0
2 минуты назад, zloytazik сказал:

Lio в принципе  пофиг какой образ  структура ядра одна  x86x64  поэтому  если запихнуть дрова , тем более что в исходниках  они все есть https://sourceforge.net/projects/qosgpl/ то все будет работать , 

ключевое слово запихнуть дрова и я о том же

Link to post
Share on other sites
  • 0
1 минуту назад, lio666 сказал:

ключевое слово запихнуть дрова и я о том же

трабла в другом что при разборке initrd.boot  и сборке его обратно  даже без изменений  перестает видится по сети  вот это непонятно !!! 

Link to post
Share on other sites
  • 0
1 минуту назад, zloytazik сказал:

прицепляйся к нам в скайп  а то руки  говорить устали и будем пытаться все вместе  

ну нету пока скайпа у мну и образ отправил мучаю товарища чтоб не спал :lol: а дрова пихал

  • Thanks 1
Link to post
Share on other sites
  • 0
1 минуту назад, zloytazik сказал:

прицепляйся к нам в скайп  а то руки  говорить устали и будем пытаться все вместе  

и я про тоже самое вперед в скайп

Link to post
Share on other sites
  • 0
Только что, habibub сказал:

ну нету пока скайпа у мну и образ отправил мучаю товарища чтоб не спал :lol: а дрова пихал

дрова на 882  бери  из исходников там kernel 4.2.8

Link to post
Share on other sites
  • 0
Только что, zloytazik сказал:

дрова на 882  бери  из исходников там kernel 4.2.8

Кстати  насчет скайпа  только сегодня и только сейчас  причем совершенно безвозмездно  можно найти на оф странице скайпа 

Link to post
Share on other sites
  • 0
1 минуту назад, zloytazik сказал:

Кстати  насчет скайпа  только сегодня и только сейчас  причем совершенно безвозмездно  можно найти на оф странице скайпа 

:lol:уже ищу:lol:

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.