o0kawa0o

New Members
  • Content count

    3
  • Joined

  • Last visited

Community Reputation

0 Neutral

About o0kawa0o

  • Rank
    Newbie
  1. DSM 6.1.4-15217 Update 1

    Updated from the UI to DSM 6.1.4-15217 Update 1 All working fine on Dell R710 bare metal using Jun 1.02b with driver extensions
  2. Iv'e tried version 3.2 with the MBR_Genesys boot loader on my R710, and it works !!!! Even updated to 6.1.3 update 4. Thank you so much! For those interested in the full dmesg output: dmesg output [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.102 (root@build1) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #15152 SMP Fri Sep 1 11:15:28 CST 2017 [ 0.000000] Command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=C7LWN09761 mac1=0024E84B993C mac2=0024E84B993E mac3=0024E84B9940 mac4=0024E84B9942 netif_num=4 vid=0x058f pid=0x6387 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf378fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf379000-0x00000000bf38efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf38f000-0x00000000bf3cdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf3ce000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000183fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R710/0HYPX2, BIOS 6.4.0 07/23/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x1840000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 0100000000 mask FF00000000 write-back [ 0.000000] 3 base 0200000000 mask FE00000000 write-back [ 0.000000] 4 base 0400000000 mask FC00000000 write-back [ 0.000000] 5 base 0800000000 mask F800000000 write-back [ 0.000000] 6 base 1000000000 mask F800000000 write-back [ 0.000000] 7 base 1800000000 mask FFC0000000 write-back [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf379 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01ab6000, 0x01ab6fff] PGTABLE [ 0.000000] BRK [0x01ab7000, 0x01ab7fff] PGTABLE [ 0.000000] BRK [0x01ab8000, 0x01ab8fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x183fe00000-0x183fffffff] [ 0.000000] [mem 0x183fe00000-0x183fffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x183c000000-0x183fdfffff] [ 0.000000] [mem 0x183c000000-0x183fdfffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x1800000000-0x183bffffff] [ 0.000000] [mem 0x1800000000-0x183bffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x1000000000-0x17ffffffff] [ 0.000000] [mem 0x1000000000-0x17ffffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf378fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xbf1fffff] page 2M [ 0.000000] [mem 0xbf200000-0xbf378fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0xfffffffff] [ 0.000000] [mem 0x100000000-0xfffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x36e92000-0x37740fff] [ 0.000000] ACPI: RSDP 0x00000000000F1150 00024 (v02 DELL ) [ 0.000000] ACPI Warning: BIOS XSDT has NULL entry, using RSDT (20130328/tbutils-678) [ 0.000000] ACPI: RSDT 0x00000000000F1174 00060 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: FACP 0x00000000BF3B3400 00074 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: DSDT 0x00000000BF38F000 03DD0 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.000000] ACPI: FACS 0x00000000BF3B6000 00040 [ 0.000000] ACPI: APIC 0x00000000BF3B3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SPCR 0x00000000BF3B35D8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HPET 0x00000000BF3B362C 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: DMAR 0x00000000BF3B3668 001B0 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: MCFG 0x00000000BF3B38C4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: WD__ 0x00000000BF3B3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SLIC 0x00000000BF3B3A3C 00024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: ERST 0x00000000BF392F70 00270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HEST 0x00000000BF3931E0 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: BERT 0x00000000BF392DD0 00030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: EINJ 0x00000000BF392E00 00170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI Error: Null physical address for ACPI table [(null)] (20130328/tbutils-464) [ 0.000000] ACPI: TCPA 0x00000000BF3B3BC0 00064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SSDT 0x00000000BF3B7000 062C4 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0054dfffff] PMD -> [ffff8817df600000-ffff8818335fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x183fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbf378fff] [ 0.000000] node 0: [mem 0x100000000-0x183fffffff] [ 0.000000] On node 0 totalpages: 25162519 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10653 pages used for memmap [ 0.000000] DMA32 zone: 779129 pages, LIFO batch:31 [ 0.000000] Normal zone: 333312 pages used for memmap [ 0.000000] Normal zone: 24379392 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x30] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x32] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 8/0x32 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 9/0x12 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 10/0x34 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 11/0x14 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x21] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 12/0x21 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 13/0x1 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x23] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 14/0x23 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x03] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 15/0x3 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x25] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 16/0x25 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x05] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 17/0x5 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x31] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 18/0x31 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x11] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 19/0x11 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x33] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 20/0x33 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x13] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 21/0x13 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x35] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 22/0x35 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x15] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 23/0x15 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32]) [ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: 32 Processors exceeds NR_CPUS limit of 8 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf379000 - 00000000bf38f000 [ 0.000000] PM: Registered nosave memory: 00000000bf38f000 - 00000000bf3ce000 [ 0.000000] PM: Registered nosave memory: 00000000bf3ce000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000 [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000 [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff88183fc00000 s69376 r8192 d20736 u262144 [ 0.000000] pcpu-alloc: s69376 r8192 d20736 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 24818477 [ 0.000000] Kernel command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=C7LWN09761 mac1=0024E84B993C mac2=0024E84B993E mac3=0024E84B9940 mac4=0024E84B9942 netif_num=4 vid=0x058f pid=0x6387 [ 0.000000] Power on seq num: 0 [ 0.000000] Synology Hardware Version: DS3615xs-j [ 0.000000] Vender format version: 2 [ 0.000000] Serial Number: C7LWN09761 [ 0.000000] Mac1: 0024E84B993C [ 0.000000] Mac2: 0024E84B993E [ 0.000000] Mac3: 0024E84B9940 [ 0.000000] Mac4: 0024E84B9942 [ 0.000000] Internal netif num: 4 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes) [ 0.000000] Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 0.000000] Memory: 98990232k/101711872k available (4806k kernel code, 1061796k absent, 1659844k reserved, 3800k data, 760k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:1288 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 402653184 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2260.944 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.88 BogoMIPS (lpj=2260944) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000040] Security Framework initialized [ 0.000046] AppArmor: AppArmor initialized [ 0.000056] Mount-cache hash table entries: 256 [ 0.000240] Initializing cgroup subsys memory [ 0.000251] Initializing cgroup subsys devices [ 0.000253] Initializing cgroup subsys freezer [ 0.000254] Initializing cgroup subsys blkio [ 0.000277] CPU: Physical Processor ID: 1 [ 0.000278] CPU: Processor Core ID: 0 [ 0.000282] mce: CPU supports 9 MCE banks [ 0.000292] CPU0: Thermal monitoring enabled (TM1) [ 0.000302] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 6 [ 0.000374] Freeing SMP alternatives: 24k freed [ 0.000381] ACPI: Core revision 20130328 [ 0.001704] ACPI: All ACPI Tables successfully acquired [ 0.001869] dmar: Host address width 40 [ 0.001870] dmar: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.001877] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020f6 [ 0.001879] dmar: RMRR base: 0x000000bf4c8000 end: 0x000000bf4dffff [ 0.001881] dmar: RMRR base: 0x000000bf4b1000 end: 0x000000bf4bffff [ 0.001882] dmar: RMRR base: 0x000000bf4a1000 end: 0x000000bf4a1fff [ 0.001883] dmar: RMRR base: 0x000000bf4a3000 end: 0x000000bf4a3fff [ 0.001884] dmar: RMRR base: 0x000000bf4a5000 end: 0x000000bf4a5fff [ 0.001885] dmar: RMRR base: 0x000000bf4a7000 end: 0x000000bf4a7fff [ 0.001887] dmar: RMRR base: 0x000000bf4c0000 end: 0x000000bf4c0fff [ 0.001888] dmar: RMRR base: 0x000000bf4c2000 end: 0x000000bf4c2fff [ 0.001889] dmar: ATSR flags: 0x0 [ 0.001994] This system BIOS has enabled interrupt remapping on a chipset that contains an erratum making that feature unstable. To maintain system stability interrupt remapping is being disabled. Please contact your BIOS vendor for an update [ 0.002607] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.012611] smpboot: CPU0: Intel(R) Xeon(R) CPU L5640 @ 2.27GHz (fam: 06, model: 2c, stepping: 02) [ 0.114113] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver. [ 0.114120] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.114122] ... version: 3 [ 0.114123] ... bit width: 48 [ 0.114124] ... generic registers: 4 [ 0.114125] ... value mask: 0000ffffffffffff [ 0.114126] ... max period: 000000007fffffff [ 0.114127] ... fixed-purpose events: 3 [ 0.114127] ... event mask: 000000070000000f [ 0.114372] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK [ 0.285225] Brought up 8 CPUs [ 0.285229] smpboot: Total of 8 processors activated (36174.91 BogoMIPS) [ 0.296065] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.296420] devtmpfs: initialized [ 0.296858] xor: measuring software checksum speed [ 0.306141] prefetch64-sse: 10640.000 MB/sec [ 0.316143] generic_sse: 9340.000 MB/sec [ 0.316144] xor: using function: prefetch64-sse (10640.000 MB/sec) [ 0.316206] NET: Registered protocol family 16 [ 0.316696] ACPI: bus type PCI registered [ 0.316843] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.316847] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.317096] PCI: Using configuration type 1 for base access [ 0.322929] bio: create slab <bio-0> at 0 [ 0.339155] raid6: sse2x1 gen() 6156 MB/s [ 0.356152] raid6: sse2x1 xor() 4841 MB/s [ 0.373156] raid6: sse2x2 gen() 7250 MB/s [ 0.390158] raid6: sse2x2 xor() 5611 MB/s [ 0.407163] raid6: sse2x4 gen() 8156 MB/s [ 0.424165] raid6: sse2x4 xor() 6171 MB/s [ 0.424166] raid6: using algorithm sse2x4 gen() (8156 MB/s) [ 0.424167] raid6: .... xor() 6171 MB/s, rmw enabled [ 0.424168] raid6: using ssse3x2 recovery algorithm [ 0.424208] ACPI: Added _OSI(Module Device) [ 0.424209] ACPI: Added _OSI(Processor Device) [ 0.424210] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.424212] ACPI: Added _OSI(Processor Aggregator Device) [ 0.424704] ACPI: EC: Look up EC in DSDT [ 0.425422] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.426386] ACPI: Interpreter enabled [ 0.426396] ACPI: (supports S0 S4 S5) [ 0.426397] ACPI: Using IOAPIC for interrupt routing [ 0.426451] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.426503] ACPI: No dock devices found. [ 0.433668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.433907] PCI host bridge to bus 0000:00 [ 0.433914] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.433917] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.433920] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.433923] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.433925] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff] [ 0.433928] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.433944] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000 [ 0.433997] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.434087] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 0.434145] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.434229] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 0.434286] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.434367] pci 0000:00:04.0: [8086:340b] type 01 class 0x060400 [ 0.434425] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.434505] pci 0000:00:05.0: [8086:340c] type 01 class 0x060400 [ 0.434567] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.434648] pci 0000:00:06.0: [8086:340d] type 01 class 0x060400 [ 0.434706] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.434787] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 0.434845] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.434921] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400 [ 0.434971] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.435056] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 0.435172] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 0.435311] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 0.435438] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.435484] pci 0000:00:1a.0: reg 20: [io 0xec40-0xec5f] [ 0.435582] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.435622] pci 0000:00:1a.1: reg 20: [io 0xec60-0xec7f] [ 0.435735] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.435760] pci 0000:00:1a.7: reg 10: [mem 0xdf0fe000-0xdf0fe3ff] [ 0.435845] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.435925] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.435971] pci 0000:00:1d.0: reg 20: [io 0xec80-0xec9f] [ 0.436072] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.436118] pci 0000:00:1d.1: reg 20: [io 0xeca0-0xecbf] [ 0.436229] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.436255] pci 0000:00:1d.7: reg 10: [mem 0xdf0ff000-0xdf0ff3ff] [ 0.436340] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.436419] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.436540] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.436624] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000800-0x00000803 flags 0x80000000] [ 0.436629] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO [ 0.436632] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) [ 0.436635] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) [ 0.436637] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f) [ 0.436737] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f [ 0.436755] pci 0000:00:1f.2: reg 10: [io 0xec10-0xec17] [ 0.436766] pci 0000:00:1f.2: reg 14: [io 0xec08-0xec0b] [ 0.436773] pci 0000:00:1f.2: reg 18: [io 0xec18-0xec1f] [ 0.436780] pci 0000:00:1f.2: reg 1c: [io 0xec0c-0xec0f] [ 0.436788] pci 0000:00:1f.2: reg 20: [io 0xec20-0xec2f] [ 0.436795] pci 0000:00:1f.2: reg 24: [io 0xec30-0xec3f] [ 0.436975] pci 0000:01:00.0: [14e4:1639] type 00 class 0x020000 [ 0.436990] pci 0000:01:00.0: reg 10: [mem 0xd6000000-0xd7ffffff 64bit] [ 0.437068] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.437148] pci 0000:01:00.1: [14e4:1639] type 00 class 0x020000 [ 0.437166] pci 0000:01:00.1: reg 10: [mem 0xd8000000-0xd9ffffff 64bit] [ 0.437248] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.439579] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.439585] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff] [ 0.439712] pci 0000:02:00.0: [14e4:1639] type 00 class 0x020000 [ 0.439731] pci 0000:02:00.0: reg 10: [mem 0xda000000-0xdbffffff 64bit] [ 0.439809] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.439890] pci 0000:02:00.1: [14e4:1639] type 00 class 0x020000 [ 0.439911] pci 0000:02:00.1: reg 10: [mem 0xdc000000-0xddffffff 64bit] [ 0.439988] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.441578] pci 0000:00:03.0: PCI bridge to [bus 02] [ 0.441584] pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff] [ 0.441688] pci 0000:00:04.0: PCI bridge to [bus 03] [ 0.441780] pci 0000:04:00.0: [1000:0072] type 00 class 0x010700 [ 0.441792] pci 0000:04:00.0: reg 10: [io 0xfc00-0xfcff] [ 0.441806] pci 0000:04:00.0: reg 14: [mem 0xdf1bc000-0xdf1bffff 64bit] [ 0.441815] pci 0000:04:00.0: reg 1c: [mem 0xdf1c0000-0xdf1fffff 64bit] [ 0.441827] pci 0000:04:00.0: reg 30: [mem 0xdf100000-0xdf17ffff pref] [ 0.441862] pci 0000:04:00.0: supports D1 D2 [ 0.441884] pci 0000:04:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit] [ 0.441892] pci 0000:04:00.0: reg 17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.443576] pci 0000:00:05.0: PCI bridge to [bus 04] [ 0.443581] pci 0000:00:05.0: bridge window [io 0xf000-0xffff] [ 0.443585] pci 0000:00:05.0: bridge window [mem 0xdf100000-0xdf1fffff] [ 0.443681] pci 0000:00:06.0: PCI bridge to [bus 05] [ 0.443762] pci 0000:00:07.0: PCI bridge to [bus 06] [ 0.443828] pci 0000:00:09.0: PCI bridge to [bus 07] [ 0.443905] pci 0000:08:03.0: [102b:0532] type 00 class 0x030000 [ 0.443924] pci 0000:08:03.0: reg 10: [mem 0xd5800000-0xd5ffffff pref] [ 0.443936] pci 0000:08:03.0: reg 14: [mem 0xde7fc000-0xde7fffff] [ 0.443945] pci 0000:08:03.0: reg 18: [mem 0xde800000-0xdeffffff] [ 0.443975] pci 0000:08:03.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.444082] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode) [ 0.444091] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff] [ 0.444096] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref] [ 0.444098] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.444100] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.444101] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.444103] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfdffffff] (subtractive decode) [ 0.444105] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 0.444129] pci_bus 0000:00: on NUMA node 0 [ 0.444218] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.444380] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted [ 0.445701] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.445760] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.445817] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.445874] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.445930] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.445987] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.446044] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.446101] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.446183] ACPI: Enabled 1 GPEs in block 00 to 3F [ 0.446197] acpi root: \_SB_.PCI0 notify handler is installed [ 0.446216] Found 1 acpi root devices [ 0.446401] vgaarb: device added: PCI:0000:08:03.0,decodes=io+mem,owns=io+mem,locks=none [ 0.446402] vgaarb: loaded [ 0.446403] vgaarb: bridge control possible 0000:08:03.0 [ 0.446573] SCSI subsystem initialized [ 0.446576] ACPI: bus type ATA registered [ 0.446698] libata version 3.00 loaded. [ 0.446842] pps_core: LinuxPPS API ver. 1 registered [ 0.446843] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.446869] PTP clock support registered [ 0.446975] PCI: Using ACPI for IRQ routing [ 0.452714] PCI: Discovered peer bus fe [ 0.452716] PCI: root bus fe: using default resources [ 0.452717] PCI: Probing PCI hardware (bus fe) [ 0.452754] PCI host bridge to bus 0000:fe [ 0.452756] pci_bus 0000:fe: root bus resource [io 0x0000-0xffff] [ 0.452758] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff] [ 0.452763] pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff] [ 0.452771] pci 0000:fe:00.0: [8086:2c70] type 00 class 0x060000 [ 0.452837] pci 0000:fe:00.1: [8086:2d81] type 00 class 0x060000 [ 0.452891] pci 0000:fe:02.0: [8086:2d90] type 00 class 0x060000 [ 0.452962] pci 0000:fe:02.1: [8086:2d91] type 00 class 0x060000 [ 0.453026] pci 0000:fe:02.2: [8086:2d92] type 00 class 0x060000 [ 0.453099] pci 0000:fe:02.3: [8086:2d93] type 00 class 0x060000 [ 0.453163] pci 0000:fe:02.4: [8086:2d94] type 00 class 0x060000 [ 0.453214] pci 0000:fe:02.5: [8086:2d95] type 00 class 0x060000 [ 0.453284] pci 0000:fe:03.0: [8086:2d98] type 00 class 0x060000 [ 0.453335] pci 0000:fe:03.1: [8086:2d99] type 00 class 0x060000 [ 0.453407] pci 0000:fe:03.2: [8086:2d9a] type 00 class 0x060000 [ 0.453474] pci 0000:fe:03.4: [8086:2d9c] type 00 class 0x060000 [ 0.453542] pci 0000:fe:04.0: [8086:2da0] type 00 class 0x060000 [ 0.453658] pci 0000:fe:04.1: [8086:2da1] type 00 class 0x060000 [ 0.453709] pci 0000:fe:04.2: [8086:2da2] type 00 class 0x060000 [ 0.453765] pci 0000:fe:04.3: [8086:2da3] type 00 class 0x060000 [ 0.453843] pci 0000:fe:05.0: [8086:2da8] type 00 class 0x060000 [ 0.453906] pci 0000:fe:05.1: [8086:2da9] type 00 class 0x060000 [ 0.453978] pci 0000:fe:05.2: [8086:2daa] type 00 class 0x060000 [ 0.454044] pci 0000:fe:05.3: [8086:2dab] type 00 class 0x060000 [ 0.454100] pci 0000:fe:06.0: [8086:2db0] type 00 class 0x060000 [ 0.454169] pci 0000:fe:06.1: [8086:2db1] type 00 class 0x060000 [ 0.454242] pci 0000:fe:06.2: [8086:2db2] type 00 class 0x060000 [ 0.454310] pci 0000:fe:06.3: [8086:2db3] type 00 class 0x060000 [ 0.454385] pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe [ 0.454389] PCI: Discovered peer bus ff [ 0.454390] PCI: root bus ff: using default resources [ 0.454391] PCI: Probing PCI hardware (bus ff) [ 0.454424] PCI host bridge to bus 0000:ff [ 0.454426] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] [ 0.454428] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff] [ 0.454430] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff] [ 0.454435] pci 0000:ff:00.0: [8086:2c70] type 00 class 0x060000 [ 0.454492] pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000 [ 0.454561] pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000 [ 0.454621] pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000 [ 0.454687] pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000 [ 0.454745] pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000 [ 0.454809] pci 0000:ff:02.4: [8086:2d94] type 00 class 0x060000 [ 0.454863] pci 0000:ff:02.5: [8086:2d95] type 00 class 0x060000 [ 0.454937] pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000 [ 0.455011] pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000 [ 0.455076] pci 0000:ff:03.2: [8086:2d9a] type 00 class 0x060000 [ 0.455129] pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000 [ 0.455204] pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000 [ 0.455263] pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000 [ 0.455332] pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000 [ 0.455403] pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000 [ 0.455462] pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000 [ 0.455515] pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000 [ 0.455585] pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000 [ 0.455658] pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000 [ 0.455720] pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000 [ 0.455775] pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000 [ 0.455843] pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000 [ 0.455915] pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000 [ 0.455990] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff [ 0.455995] PCI: pci_cache_line_size set to 64 bytes [ 0.456086] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.456087] e820: reserve RAM buffer [mem 0xbf379000-0xbfffffff] [ 0.456361] Switching to clocksource hpet [ 0.456507] AppArmor: AppArmor Filesystem Enabled [ 0.456585] pnp: PnP ACPI init [ 0.456600] ACPI: bus type PNP registered [ 0.456714] pnp 00:00: [dma 4] [ 0.456782] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.456874] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.457000] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.457091] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.457464] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.457794] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.458923] system 00:06: [io 0x0800-0x087f] could not be reserved [ 0.458928] system 00:06: [io 0x0880-0x08ff] could not be reserved [ 0.458931] system 00:06: [io 0x0900-0x091f] has been reserved [ 0.458934] system 00:06: [io 0x0920-0x0923] has been reserved [ 0.458937] system 00:06: [io 0x0924] has been reserved [ 0.458940] system 00:06: [io 0x0c00-0x0c7f] has been reserved [ 0.458943] system 00:06: [io 0x0ca0-0x0ca7] has been reserved [ 0.458946] system 00:06: [io 0x0ca9-0x0cab] has been reserved [ 0.458948] system 00:06: [io 0x0cad-0x0caf] has been reserved [ 0.458952] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.459011] pnp 00:07: [irq 0 disabled] [ 0.459099] system 00:07: [io 0x0ca8] has been reserved [ 0.459103] system 00:07: [io 0x0cac] has been reserved [ 0.459107] system 00:07: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.460003] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.460008] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.460126] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.460232] system 00:0a: [mem 0xfed90000-0xfed91fff] could not be reserved [ 0.460237] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.460460] pnp: PnP ACPI: found 11 devices [ 0.460462] ACPI: bus type PNP unregistered [ 0.471021] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment [ 0.471027] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.471033] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff] [ 0.471040] pci 0000:00:03.0: PCI bridge to [bus 02] [ 0.471045] pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff] [ 0.471052] pci 0000:00:04.0: PCI bridge to [bus 03] [ 0.471070] pci 0000:04:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit] [ 0.471080] pci 0000:04:00.0: reg 17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.471089] pci 0000:04:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit] [ 0.471099] pci 0000:04:00.0: reg 17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.471104] pci 0000:04:00.0: BAR 9: can't assign mem (size 0x400000) [ 0.471114] pci 0000:04:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit] [ 0.471117] pci 0000:04:00.0: BAR 7: can't assign mem (size 0x40000) [ 0.471119] pci 0000:00:05.0: PCI bridge to [bus 04] [ 0.471123] pci 0000:00:05.0: bridge window [io 0xf000-0xffff] [ 0.471128] pci 0000:00:05.0: bridge window [mem 0xdf100000-0xdf1fffff] [ 0.471135] pci 0000:00:06.0: PCI bridge to [bus 05] [ 0.471144] pci 0000:00:07.0: PCI bridge to [bus 06] [ 0.471153] pci 0000:00:09.0: PCI bridge to [bus 07] [ 0.471165] pci 0000:08:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref] [ 0.471167] pci 0000:00:1e.0: PCI bridge to [bus 08] [ 0.471173] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff] [ 0.471177] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref] [ 0.471184] Some PCI device resources are unassigned, try booting with pci=realloc [ 0.473279] pci 0000:00:1e.0: setting latency timer to 64 [ 0.473286] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.473289] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.473291] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.473294] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfdffffff] [ 0.473297] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.473299] pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd9ffffff] [ 0.473302] pci_bus 0000:02: resource 1 [mem 0xda000000-0xddffffff] [ 0.473305] pci_bus 0000:04: resource 0 [io 0xf000-0xffff] [ 0.473308] pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf1fffff] [ 0.473311] pci_bus 0000:08: resource 1 [mem 0xde000000-0xdeffffff] [ 0.473314] pci_bus 0000:08: resource 2 [mem 0xd5800000-0xd5ffffff 64bit pref] [ 0.473316] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] [ 0.473319] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] [ 0.473321] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] [ 0.473324] pci_bus 0000:08: resource 7 [mem 0xc0000000-0xfdffffff] [ 0.473326] pci_bus 0000:08: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.473329] pci_bus 0000:fe: resource 4 [io 0x0000-0xffff] [ 0.473332] pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff] [ 0.473335] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff] [ 0.473338] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff] [ 0.473425] NET: Registered protocol family 2 [ 0.473737] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.474689] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.474907] TCP: Hash tables configured (established 262144 bind 65536) [ 0.474936] TCP: reno registered [ 0.474948] UDP hash table entries: 65536 (order: 9, 2097152 bytes) [ 0.475513] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes) [ 0.476159] NET: Registered protocol family 1 [ 0.476288] RPC: Registered named UNIX socket transport module. [ 0.476290] RPC: Registered udp transport module. [ 0.476291] RPC: Registered tcp transport module. [ 0.476293] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.490523] pci 0000:08:03.0: Boot video device [ 0.490611] PCI: CLS 64 bytes, default 64 [ 0.490664] Trying to unpack rootfs image as initramfs... [ 2.586064] Freeing initrd memory: 8892k freed [ 2.609199] IOMMU 0 0xfed90000: using Queued invalidation [ 2.609202] IOMMU passthrough mode = 1 [ 2.609231] IOMMU: hardware identity mapping for device 0000:00:00.0 [ 2.609234] IOMMU: hardware identity mapping for device 0000:00:01.0 [ 2.609237] IOMMU: hardware identity mapping for device 0000:00:03.0 [ 2.609239] IOMMU: hardware identity mapping for device 0000:00:04.0 [ 2.609242] IOMMU: hardware identity mapping for device 0000:00:05.0 [ 2.609244] IOMMU: hardware identity mapping for device 0000:00:06.0 [ 2.609246] IOMMU: hardware identity mapping for device 0000:00:07.0 [ 2.609249] IOMMU: hardware identity mapping for device 0000:00:09.0 [ 2.609251] IOMMU: hardware identity mapping for device 0000:00:14.0 [ 2.609254] IOMMU: hardware identity mapping for device 0000:00:14.1 [ 2.609256] IOMMU: hardware identity mapping for device 0000:00:14.2 [ 2.609258] IOMMU: hardware identity mapping for device 0000:00:1a.0 [ 2.609261] IOMMU: hardware identity mapping for device 0000:00:1a.1 [ 2.609263] IOMMU: hardware identity mapping for device 0000:00:1a.7 [ 2.609265] IOMMU: hardware identity mapping for device 0000:00:1d.0 [ 2.609268] IOMMU: hardware identity mapping for device 0000:00:1d.1 [ 2.609270] IOMMU: hardware identity mapping for device 0000:00:1d.7 [ 2.609273] IOMMU: hardware identity mapping for device 0000:00:1f.0 [ 2.609275] IOMMU: hardware identity mapping for device 0000:00:1f.2 [ 2.609286] IOMMU: hardware identity mapping for device 0000:01:00.0 [ 2.609289] IOMMU: hardware identity mapping for device 0000:01:00.1 [ 2.609299] IOMMU: hardware identity mapping for device 0000:02:00.0 [ 2.609302] IOMMU: hardware identity mapping for device 0000:02:00.1 [ 2.609312] IOMMU: hardware identity mapping for device 0000:04:00.0 [ 2.609323] IOMMU: hardware identity mapping for device 0000:fe:00.0 [ 2.609326] IOMMU: hardware identity mapping for device 0000:fe:00.1 [ 2.609328] IOMMU: hardware identity mapping for device 0000:fe:02.0 [ 2.609330] IOMMU: hardware identity mapping for device 0000:fe:02.1 [ 2.609333] IOMMU: hardware identity mapping for device 0000:fe:02.2 [ 2.609335] IOMMU: hardware identity mapping for device 0000:fe:02.3 [ 2.609338] IOMMU: hardware identity mapping for device 0000:fe:02.4 [ 2.609340] IOMMU: hardware identity mapping for device 0000:fe:02.5 [ 2.609342] IOMMU: hardware identity mapping for device 0000:fe:03.0 [ 2.609345] IOMMU: hardware identity mapping for device 0000:fe:03.1 [ 2.609347] IOMMU: hardware identity mapping for device 0000:fe:03.2 [ 2.609349] IOMMU: hardware identity mapping for device 0000:fe:03.4 [ 2.609352] IOMMU: hardware identity mapping for device 0000:fe:04.0 [ 2.609354] IOMMU: hardware identity mapping for device 0000:fe:04.1 [ 2.609356] IOMMU: hardware identity mapping for device 0000:fe:04.2 [ 2.609359] IOMMU: hardware identity mapping for device 0000:fe:04.3 [ 2.609361] IOMMU: hardware identity mapping for device 0000:fe:05.0 [ 2.609364] IOMMU: hardware identity mapping for device 0000:fe:05.1 [ 2.609366] IOMMU: hardware identity mapping for device 0000:fe:05.2 [ 2.609369] IOMMU: hardware identity mapping for device 0000:fe:05.3 [ 2.609371] IOMMU: hardware identity mapping for device 0000:fe:06.0 [ 2.609373] IOMMU: hardware identity mapping for device 0000:fe:06.1 [ 2.609376] IOMMU: hardware identity mapping for device 0000:fe:06.2 [ 2.609378] IOMMU: hardware identity mapping for device 0000:fe:06.3 [ 2.609389] IOMMU: hardware identity mapping for device 0000:ff:00.0 [ 2.609391] IOMMU: hardware identity mapping for device 0000:ff:00.1 [ 2.609393] IOMMU: hardware identity mapping for device 0000:ff:02.0 [ 2.609396] IOMMU: hardware identity mapping for device 0000:ff:02.1 [ 2.609398] IOMMU: hardware identity mapping for device 0000:ff:02.2 [ 2.609401] IOMMU: hardware identity mapping for device 0000:ff:02.3 [ 2.609403] IOMMU: hardware identity mapping for device 0000:ff:02.4 [ 2.609405] IOMMU: hardware identity mapping for device 0000:ff:02.5 [ 2.609407] IOMMU: hardware identity mapping for device 0000:ff:03.0 [ 2.609410] IOMMU: hardware identity mapping for device 0000:ff:03.1 [ 2.609412] IOMMU: hardware identity mapping for device 0000:ff:03.2 [ 2.609415] IOMMU: hardware identity mapping for device 0000:ff:03.4 [ 2.609418] IOMMU: hardware identity mapping for device 0000:ff:04.0 [ 2.609420] IOMMU: hardware identity mapping for device 0000:ff:04.1 [ 2.609422] IOMMU: hardware identity mapping for device 0000:ff:04.2 [ 2.609425] IOMMU: hardware identity mapping for device 0000:ff:04.3 [ 2.609427] IOMMU: hardware identity mapping for device 0000:ff:05.0 [ 2.609430] IOMMU: hardware identity mapping for device 0000:ff:05.1 [ 2.609432] IOMMU: hardware identity mapping for device 0000:ff:05.2 [ 2.609434] IOMMU: hardware identity mapping for device 0000:ff:05.3 [ 2.609437] IOMMU: hardware identity mapping for device 0000:ff:06.0 [ 2.609439] IOMMU: hardware identity mapping for device 0000:ff:06.1 [ 2.609442] IOMMU: hardware identity mapping for device 0000:ff:06.2 [ 2.609444] IOMMU: hardware identity mapping for device 0000:ff:06.3 [ 2.609446] IOMMU: Setting RMRR: [ 2.609448] Ignoring identity map for HW passthrough device 0000:00:1d.7 [0xbf4c2000 - 0xbf4c2fff] [ 2.609450] Ignoring identity map for HW passthrough device 0000:00:1a.7 [0xbf4c0000 - 0xbf4c0fff] [ 2.609451] Ignoring identity map for HW passthrough device 0000:00:1d.1 [0xbf4a7000 - 0xbf4a7fff] [ 2.609453] Ignoring identity map for HW passthrough device 0000:00:1d.0 [0xbf4a5000 - 0xbf4a5fff] [ 2.609455] Ignoring identity map for HW passthrough device 0000:00:1a.1 [0xbf4a3000 - 0xbf4a3fff] [ 2.609457] Ignoring identity map for HW passthrough device 0000:00:1a.0 [0xbf4a1000 - 0xbf4a1fff] [ 2.609458] Ignoring identity map for HW passthrough device 0000:00:1a.0 [0xbf4b1000 - 0xbf4bffff] [ 2.609460] Ignoring identity map for HW passthrough device 0000:00:1a.1 [0xbf4b1000 - 0xbf4bffff] [ 2.609462] Ignoring identity map for HW passthrough device 0000:00:1d.0 [0xbf4b1000 - 0xbf4bffff] [ 2.609464] Ignoring identity map for HW passthrough device 0000:00:1d.1 [0xbf4b1000 - 0xbf4bffff] [ 2.609465] Ignoring identity map for HW passthrough device 0000:00:1a.7 [0xbf4c8000 - 0xbf4dffff] [ 2.609467] Ignoring identity map for HW passthrough device 0000:00:1d.7 [0xbf4c8000 - 0xbf4dffff] [ 2.609470] IOMMU: Prepare 0-16MiB unity mapping for LPC [ 2.609471] Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff] [ 2.609508] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O [ 2.624245] audit: initializing netlink socket (disabled) [ 2.624266] type=2000 audit(1505957585.488:1): initialized [ 2.627525] bounce pool size: 64 pages [ 2.627853] VFS: Disk quotas dquot_6.5.2 [ 2.627917] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.628257] NFS: Registering the id_resolver key type [ 2.628268] Key type id_resolver registered [ 2.628269] Key type id_legacy registered [ 2.628283] msgmni has been set to 32768 [ 2.628936] async_tx: api initialized (async) [ 2.629044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.629047] io scheduler noop registered [ 2.629049] io scheduler deadline registered [ 2.629069] io scheduler cfq registered (default) [ 2.629315] pcieport 0000:00:01.0: irq 73 for MSI/MSI-X [ 2.630199] pcieport 0000:00:03.0: irq 74 for MSI/MSI-X [ 2.630778] pcieport 0000:00:04.0: irq 75 for MSI/MSI-X [ 2.631368] pcieport 0000:00:05.0: irq 76 for MSI/MSI-X [ 2.631682] pcieport 0000:00:06.0: irq 77 for MSI/MSI-X [ 2.632726] pcieport 0000:00:07.0: irq 78 for MSI/MSI-X [ 2.633253] pcieport 0000:00:09.0: irq 79 for MSI/MSI-X [ 2.635269] aer 0000:00:01.0:pcie02: service driver aer loaded [ 2.635296] aer 0000:00:03.0:pcie02: service driver aer loaded [ 2.635323] aer 0000:00:04.0:pcie02: service driver aer loaded [ 2.635349] aer 0000:00:05.0:pcie02: service driver aer loaded [ 2.635376] aer 0000:00:06.0:pcie02: service driver aer loaded [ 2.635402] aer 0000:00:07.0:pcie02: service driver aer loaded [ 2.635427] aer 0000:00:09.0:pcie02: service driver aer loaded [ 2.899474] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.920473] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.920639] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250 [ 2.946534] brd: module loaded [ 2.947411] Unknown LPC device 2918 [ 2.950261] Loading iSCSI transport class v2.0-870. [ 2.960865] rdac: device handler registered [ 2.968911] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.972107] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.972114] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.972253] rtc_cmos 00:03: RTC can wake from S4 [ 2.972495] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.972525] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 2.972621] i2c /dev entries driver [ 2.975592] md: linear personality registered for level -1 [ 2.975596] md: raid0 personality registered for level 0 [ 2.975598] md: raid1 personality registered for level 1 [ 2.975600] md: raid10 personality registered for level 10 [ 2.976370] md: raid6 personality registered for level 6 [ 2.976373] md: raid5 personality registered for level 5 [ 2.976375] md: raid4 personality registered for level 4 [ 2.976376] md: raidF1 personality registered for level 45 [ 2.977345] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 2.977350] cpuidle: using governor ladder [ 2.977352] cpuidle: using governor menu [ 2.977483] TCP: cubic registered [ 2.977486] NET: Registered protocol family 17 [ 2.977514] Key type dns_resolver registered [ 2.983604] registered taskstats version 1 [ 2.984844] rtc_cmos 00:03: setting system clock to 2017-09-21 01:33:06 UTC (1505957586) [ 2.985622] Freeing unused kernel memory: 760k freed [ 2.985827] Write protecting the kernel read-only data: 8192k [ 2.986032] Freeing unused kernel memory: 1328k freed [ 2.987699] Freeing unused kernel memory: 500k freed [ 3.060206] ACPI: bus type USB registered [ 3.060411] usbcore: registered new interface driver usbfs [ 3.060513] usbcore: registered new interface driver hub [ 3.060650] usbcore: registered new interface driver ethub [ 3.060781] usbcore: registered new device driver usb [ 3.073090] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.078755] ehci-pci: EHCI PCI platform driver [ 3.079147] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 3.079174] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 3.079184] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.079199] ehci-pci 0000:00:1a.7: debug port 1 [ 3.079218] 32bit 0000:00:1a.7 uses non-identity mapping [ 3.083160] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 3.083182] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdf0fe000 [ 3.088996] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.089317] hub 1-0:1.0: USB hub found [ 3.089323] hub 1-0:1.0: 4 ports detected [ 3.089722] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 3.089739] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 3.089746] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.089758] ehci-pci 0000:00:1d.7: debug port 1 [ 3.089774] 32bit 0000:00:1d.7 uses non-identity mapping [ 3.093720] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 3.093743] ehci-pci 0000:00:1d.7: irq 21, io mem 0xdf0ff000 [ 3.098995] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.099300] hub 2-0:1.0: USB hub found [ 3.099306] hub 2-0:1.0: 4 ports detected [ 3.106958] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.112992] uhci_hcd: USB Universal Host Controller Interface driver [ 3.113374] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.113379] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.113387] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.113428] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40 [ 3.113442] 32bit 0000:00:1a.0 uses non-identity mapping [ 3.113828] hub 3-0:1.0: USB hub found [ 3.113836] hub 3-0:1.0: 2 ports detected [ 3.114245] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3.114249] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.114256] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.114292] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60 [ 3.114304] 32bit 0000:00:1a.1 uses non-identity mapping [ 3.114693] hub 4-0:1.0: USB hub found [ 3.114699] hub 4-0:1.0: 2 ports detected [ 3.115097] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.115101] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.115108] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 3.115135] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80 [ 3.115146] 32bit 0000:00:1d.0 uses non-identity mapping [ 3.115501] hub 5-0:1.0: USB hub found [ 3.115514] hub 5-0:1.0: 2 ports detected [ 3.115902] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.115906] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.115913] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 3.115950] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0 [ 3.115961] 32bit 0000:00:1d.1 uses non-identity mapping [ 3.116344] hub 6-0:1.0: USB hub found [ 3.116351] hub 6-0:1.0: 2 ports detected [ 3.150037] usbcore: registered new interface driver usb-storage [ 3.169007] VMware PVSCSI driver - version 1.0.2.0-k [ 3.174892] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 3.180908] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 3.198982] Fusion MPT base driver 3.04.20 [ 3.198985] Copyright (c) 1999-2008 LSI Corporation [ 3.210418] Fusion MPT SPI Host driver 3.04.20 [ 3.216510] Fusion MPT SAS Host driver 3.04.20 [ 3.222490] Fusion MPT misc device (ioctl) driver 3.04.20 [ 3.222628] mptctl: Registered with Fusion MPT base driver [ 3.222631] mptctl: /dev/mptctl @ (major,minor=10,220) [ 3.228521] ata_piix 0000:00:1f.2: version 2.13 [ 3.228883] ata_piix 0000:00:1f.2: MAP [ [ 3.228886] P0 -- P1 -- ] [ 3.379073] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 3.379093] 32bit 0000:00:1f.2 uses non-identity mapping [ 3.379833] scsi0 : ata_piix [ 3.380098] scsi1 : ata_piix [ 3.380490] ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23 [ 3.380495] ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 23 [ 3.412069] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 3.547463] Got empty serial number. Generate serial number from product. [ 3.547836] hub 1-3:1.0: USB hub found [ 3.547961] hub 1-3:1.0: 3 ports detected [ 3.616110] tsc: Refined TSC clocksource calibration: 2260.999 MHz [ 3.616116] Switching to clocksource tsc [ 3.836196] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.836488] ata1.00: ATA-9: SATA SSD, SAFM12.2, max UDMA/133 [ 3.836491] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 3.836872] ata1.00: configured for UDMA/133 [ 3.836889] ata1.00: Find SSD disks. [SATA SSD] [ 3.837250] scsi 0:0:0:0: Direct-Access SATA SSD SAFM PQ: 0 ANSI: 5 [ 3.837613] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 3.837715] sd 0:0:0:0: [sda] Write Protect is off [ 3.837718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.837747] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.838321] sda: sda1 sda2 sda3 [ 3.839398] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.965187] usb 2-3: new high-speed USB device number 3 using ehci-pci [ 4.126891] usb-storage 2-3:1.0: USB Mass Storage device detected [ 4.126947] scsi2 : usb-storage 2-3:1.0 [ 4.127374] usb-storage 2-3:1.1: USB Mass Storage device detected [ 4.127426] scsi3 : usb-storage 2-3:1.1 [ 4.354273] usb 5-2: new full-speed USB device number 2 using uhci_hcd [ 4.387283] ata2: failed to resume link (SControl 0) [ 4.398086] ata2: SATA link down (SStatus 4 SControl 0) [ 4.404106] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013 [ 4.410868] mpt2sas version 20.00.00.00 loaded [ 4.411034] scsi4 : Fusion MPT SAS Host [ 4.411642] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (99067688 kB) [ 4.483313] mpt2sas0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 4.483337] mpt2sas 0000:04:00.0: irq 80 for MSI/MSI-X [ 4.483364] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 80 [ 4.483367] mpt2sas0: iomem(0x00000000df1bc000), mapped(0xffffc90010208000), size(16384) [ 4.483369] mpt2sas0: ioport(0x000000000000fc00), size(256) [ 4.526554] drivers/usb/core/hub.c (2679) Same device found. Change serial to 20120430 [ 4.526558] drivers/usb/core/hub.c (2679) Same device found. Change serial to 20120431 [ 4.555320] mpt2sas0: sending message unit reset !! [ 4.557320] mpt2sas0: message unit reset: SUCCESS [ 4.607723] mpt2sas0: Allocated physical memory: size(7445 kB) [ 4.607726] mpt2sas0: Current Controller Queue Depth(3307), Max Controller Queue Depth(3432) [ 4.607728] mpt2sas0: Scatter Gather Elements per IO(128) [ 4.666856] mpt2sas0: LSISAS2008: FWVersion(20.00.07.00), ChipRevision(0x03), BiosVersion(07.39.00.00) [ 4.666859] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ) [ 4.666982] mpt2sas0: sending port enable !! [ 4.733483] usb 1-3.1: new high-speed USB device number 3 using ehci-pci [ 4.836896] usb-storage 1-3.1:1.0: USB Mass Storage device detected [ 4.836955] scsi5 : usb-storage 1-3.1:1.0 [ 4.920527] usb 1-3.3: new high-speed USB device number 4 using ehci-pci [ 5.016549] usb-storage 1-3.3:1.0: USB Mass Storage device detected [ 5.016602] scsi6 : usb-storage 1-3.3:1.0 [ 5.130138] scsi 2:0:0:0: Direct-Access iDRAC LCDRIVE 0323 PQ: 0 ANSI: 0 CCS [ 5.133516] scsi 3:0:0:0: CD-ROM iDRAC Virtual CD 0323 PQ: 0 ANSI: 0 [ 5.134277] sd 2:0:0:0: [sdu] Attached SCSI removable disk [ 5.135900] scsi 3:0:0:1: Direct-Access iDRAC Virtual Floppy 0323 PQ: 0 ANSI: 0 CCS [ 5.139141] sd 3:0:0:1: [sdv] Attached SCSI removable disk [ 5.843743] scsi 5:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [ 5.845245] sd 5:0:0:0: [synoboot] 7987200 512-byte logical blocks: (4.08 GB/3.80 GiB) [ 5.846243] sd 5:0:0:0: [synoboot] Write Protect is off [ 5.846248] sd 5:0:0:0: [synoboot] Mode Sense: 23 00 00 00 [ 5.847374] sd 5:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.851998] synoboot: synoboot1 synoboot2 [ 5.855245] sd 5:0:0:0: [synoboot] Attached SCSI removable disk [ 6.021785] scsi 6:0:0:0: Direct-Access Generic USB Flash Disk 0.00 PQ: 0 ANSI: 2 [ 6.022914] sd 6:0:0:0: [sdw] 503808 512-byte logical blocks: (257 MB/246 MiB) [ 6.023665] sd 6:0:0:0: [sdw] Write Protect is off [ 6.023669] sd 6:0:0:0: [sdw] Mode Sense: 00 00 00 00 [ 6.024412] sd 6:0:0:0: [sdw] Asking for cache data failed [ 6.029900] sd 6:0:0:0: [sdw] Assuming drive cache: write through [ 6.039410] sd 6:0:0:0: [sdw] Asking for cache data failed [ 6.044894] sd 6:0:0:0: [sdw] Assuming drive cache: write through [ 6.186332] mpt2sas0: host_add: handle(0x0001), sas_addr(0x500605b002c8b2af), phys(8) [ 6.217354] sdw: sdw1 sdw2 sdw3 [ 6.220453] sd 6:0:0:0: [sdw] Asking for cache data failed [ 6.225935] sd 6:0:0:0: [sdw] Assuming drive cache: write through [ 6.232019] sd 6:0:0:0: [sdw] Attached SCSI removable disk [ 12.313079] mpt2sas0: port enable: SUCCESS [ 12.437059] scsi 4:0:0:0: Direct-Access ATA ST2000DM001-1ER164 CC25 PQ: 0 ANSI: 6 [ 12.437448] scsi 4:0:0:0: SATA: handle(0x000c), sas_addr(0x4433221102000000), phy(2), device_name(0x0000000000000000) [ 12.437452] scsi 4:0:0:0: SATA: enclosure_logical_id(0x500605b002c8b2af), slot(1) [ 12.437552] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 12.437933] scsi 4:0:0:0: serial_number( Z4Z29WPC) [ 12.437939] scsi 4:0:0:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ 12.438836] sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 12.438840] sd 4:0:0:0: [sde] 4096-byte physical blocks [ 12.507826] sd 4:0:0:0: [sde] Write Protect is off [ 12.507832] sd 4:0:0:0: [sde] Mode Sense: 7f 00 10 08 [ 12.508746] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 12.595736] sde: sde1 sde2 sde3 < sde5 > [ 12.667889] sd 4:0:0:0: [sde] Attached SCSI disk [ 12.686726] scsi 4:0:1:0: Direct-Access ATA ST2000DM001-1ER164 CC25 PQ: 0 ANSI: 6 [ 12.687108] scsi 4:0:1:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x0000000000000000) [ 12.687113] scsi 4:0:1:0: SATA: enclosure_logical_id(0x500605b002c8b2af), slot(3) [ 12.687213] scsi 4:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 12.687597] scsi 4:0:1:0: serial_number( Z4Z2A8N0) [ 12.687603] scsi 4:0:1:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ 12.688502] sd 4:0:1:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 12.688506] sd 4:0:1:0: [sdf] 4096-byte physical blocks [ 12.754639] sd 4:0:1:0: [sdf] Write Protect is off [ 12.754645] sd 4:0:1:0: [sdf] Mode Sense: 7f 00 10 08 [ 12.755553] sd 4:0:1:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 12.835067] sdf: sdf1 sdf2 sdf3 < sdf5 > [ 12.906342] sd 4:0:1:0: [sdf] Attached SCSI disk [ 12.936733] scsi 4:0:2:0: Direct-Access ATA ST2000DM001-1ER164 CC25 PQ: 0 ANSI: 6 [ 12.937112] scsi 4:0:2:0: SATA: handle(0x000a), sas_addr(0x4433221101000000), phy(1), device_name(0x0000000000000000) [ 12.937116] scsi 4:0:2:0: SATA: enclosure_logical_id(0x500605b002c8b2af), slot(2) [ 12.937221] scsi 4:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 12.937597] scsi 4:0:2:0: serial_number( Z4Z2A8VC) [ 12.937603] scsi 4:0:2:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ 12.938509] sd 4:0:2:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 12.938513] sd 4:0:2:0: [sdg] 4096-byte physical blocks [ 13.005165] sd 4:0:2:0: [sdg] Write Protect is off [ 13.005170] sd 4:0:2:0: [sdg] Mode Sense: 7f 00 10 08 [ 13.006076] sd 4:0:2:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 13.087230] sdg: sdg1 sdg2 sdg3 < sdg5 > [ 13.165195] sd 4:0:2:0: [sdg] Attached SCSI disk [ 13.185634] scsi 4:0:3:0: Direct-Access HGST HDN728080ALE604 W91X PQ: 0 ANSI: 6 [ 13.185790] scsi 4:0:3:0: SATA: handle(0x000b), sas_addr(0x4433221106000000), phy(6), device_name(0x0000000000000000) [ 13.185795] scsi 4:0:3:0: SATA: enclosure_logical_id(0x500605b002c8b2af), slot(5) [ 13.185895] scsi 4:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 13.186060] scsi 4:0:3:0: serial_number(R6G12MZY ) [ 13.186066] scsi 4:0:3:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ 13.186753] sd 4:0:3:0: [sdh] 15628053168 512-byte logical blocks: (8.00 TB/7.27 TiB) [ 13.186757] sd 4:0:3:0: [sdh] 4096-byte physical blocks [ 13.190597] sd 4:0:3:0: [sdh] Write Protect is off [ 13.190602] sd 4:0:3:0: [sdh] Mode Sense: 7f 00 10 08 [ 13.190936] sd 4:0:3:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 13.234492] sdh: sdh1 sdh2 sdh5 sdh6 [ 13.240699] sd 4:0:3:0: [sdh] Attached SCSI disk [ 13.435723] scsi 4:0:4:0: Direct-Access HGST HDN728080ALE604 W91X PQ: 0 ANSI: 6 [ 13.435882] scsi 4:0:4:0: SATA: handle(0x000d), sas_addr(0x4433221107000000), phy(7), device_name(0x0000000000000000) [ 13.435887] scsi 4:0:4:0: SATA: enclosure_logical_id(0x500605b002c8b2af), slot(4) [ 13.435989] scsi 4:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 13.436155] scsi 4:0:4:0: serial_number(R6G0WTDY ) [ 13.436161] scsi 4:0:4:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ 13.436836] sd 4:0:4:0: [sdi] 15628053168 512-byte logical blocks: (8.00 TB/7.27 TiB) [ 13.436840] sd 4:0:4:0: [sdi] 4096-byte physical blocks [ 13.440666] sd 4:0:4:0: [sdi] Write Protect is off [ 13.440671] sd 4:0:4:0: [sdi] Mode Sense: 7f 00 10 08 [ 13.440996] sd 4:0:4:0: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 13.486121] sdi: sdi1 sdi2 sdi5 sdi6 [ 13.492276] sd 4:0:4:0: [sdi] Attached SCSI disk [ 13.498660] mpt3sas version 01.100.01.00 loaded [ 13.511048] Adaptec aacraid driver 1.2-0[30200]-ms [ 13.517261] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 13.523279] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 13.529261] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 13.553370] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 13.559640] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0 [ 13.576951] bromolow_synobios: module license 'Synology Inc.' taints kernel. [ 13.576955] Disabling lock debugging due to kernel taint [ 13.577406] 2017-9-21 1:33:16 UTC [ 13.577410] synobios: load, major number 201 [ 13.577414] Brand: Synology [ 13.577416] Model: DS-3615xs [ 13.577419] set group disks wakeup number to 4, spinup time deno 7 [ 14.078494] synobios cpu_arch proc entry initialized [ 14.078498] synobios crypto_hw proc entry initialized [ 14.078502] synobios syno_platform proc entry initialized [ 14.089505] synobios: unload [ 19.102230] md: Autodetecting RAID arrays. [ 19.111575] md: invalid raid superblock magic on sda3 [ 19.116624] md: sda3 does not have a valid v0.90 superblock, not importing! [ 19.161143] md: invalid raid superblock magic on sde5 [ 19.166189] md: sde5 does not have a valid v0.90 superblock, not importing! [ 19.212043] md: invalid raid superblock magic on sdf5 [ 19.217090] md: sdf5 does not have a valid v0.90 superblock, not importing! [ 19.263218] md: invalid raid superblock magic on sdg5 [ 19.268267] md: sdg5 does not have a valid v0.90 superblock, not importing! [ 19.305056] md: invalid raid superblock magic on sdh5 [ 19.310103] md: sdh5 does not have a valid v0.90 superblock, not importing! [ 19.324367] md: invalid raid superblock magic on sdh6 [ 19.329411] md: sdh6 does not have a valid v0.90 superblock, not importing! [ 19.369031] md: invalid raid superblock magic on sdi5 [ 19.374078] md: sdi5 does not have a valid v0.90 superblock, not importing! [ 19.391618] md: invalid raid superblock magic on sdi6 [ 19.396664] md: sdi6 does not have a valid v0.90 superblock, not importing! [ 19.396672] md: Scanned 20 and added 12 devices. [ 19.396674] md: autorun ... [ 19.396676] md: considering sda1 ... [ 19.396688] md: adding sda1 ... [ 19.396692] md: sda2 has different UUID to sda1 [ 19.396696] md: adding sde1 ... [ 19.396699] md: sde2 has different UUID to sda1 [ 19.396703] md: adding sdf1 ... [ 19.396706] md: sdf2 has different UUID to sda1 [ 19.396710] md: adding sdg1 ... [ 19.396713] md: sdg2 has different UUID to sda1 [ 19.396717] md: adding sdh1 ... [ 19.396720] md: sdh2 has different UUID to sda1 [ 19.396724] md: adding sdi1 ... [ 19.396727] md: sdi2 has different UUID to sda1 [ 19.396742] md: created md0 [ 19.396745] md: bind<sdi1> [ 19.396759] md: bind<sdh1> [ 19.396767] md: bind<sdg1> [ 19.396775] md: bind<sdf1> [ 19.396783] md: bind<sde1> [ 19.396791] md: bind<sda1> [ 19.396799] md: running: <sda1><sde1><sdf1><sdg1><sdh1><sdi1> [ 19.397034] md/raid1:md0: active with 6 out of 12 mirrors [ 19.397059] md0: detected capacity change from 0 to 2549940224 [ 19.397149] md: considering sda2 ... [ 19.397154] md: adding sda2 ... [ 19.397158] md: adding sde2 ... [ 19.397162] md: adding sdf2 ... [ 19.397166] md: adding sdg2 ... [ 19.397169] md: adding sdh2 ... [ 19.397173] md: adding sdi2 ... [ 19.397452] md: created md1 [ 19.397455] md: bind<sdi2> [ 19.397463] md: bind<sdh2> [ 19.397472] md: bind<sdg2> [ 19.397480] md: bind<sdf2> [ 19.397489] md: bind<sde2> [ 19.397497] md: bind<sda2> [ 19.397505] md: running: <sda2><sde2><sdf2><sdg2><sdh2><sdi2> [ 19.397723] md/raid1:md1: active with 6 out of 12 mirrors [ 19.397746] md1: detected capacity change from 0 to 2147418112 [ 19.397833] md: ... autorun DONE. [ 19.442505] md0: unknown partition table [ 20.612224] EXT4-fs (md0): barriers disabled [ 20.620234] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [ 24.830183] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 25.989159] EXT4-fs (md0): re-mounted. Opts: (null) [ 28.807144] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 28.807224] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 28.807297] scsi 3:0:0:0: Attached scsi generic sg2 type 5 [ 28.807367] sd 3:0:0:1: Attached scsi generic sg3 type 0 [ 28.807442] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 28.807515] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 28.807586] sd 4:0:0:0: Attached scsi generic sg6 type 0 [ 28.807656] sd 4:0:1:0: Attached scsi generic sg7 type 0 [ 28.807727] sd 4:0:2:0: Attached scsi generic sg8 type 0 [ 28.807801] sd 4:0:3:0: Attached scsi generic sg9 type 0 [ 28.807887] sd 4:0:4:0: Attached scsi generic sg10 type 0 [ 29.197575] md1: unknown partition table [ 29.308544] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k [ 29.592222] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 29.593103] zram: Created 4 device(s) ... [ 29.628018] Adding 14860284k swap on /dev/zram0. Priority:1 extents:1 across:14860284k SS [ 29.656355] Adding 14860284k swap on /dev/zram1. Priority:1 extents:1 across:14860284k SS [ 29.685502] Adding 14860284k swap on /dev/zram2. Priority:1 extents:1 across:14860284k SS [ 29.713752] Adding 14860284k swap on /dev/zram3. Priority:1 extents:1 across:14860284k SS [ 30.842026] NET: Registered protocol family 10 [ 30.881636] sit: IPv6 over IPv4 tunneling driver [ 30.939857] init: syno-auth-check main process (6782) killed by TERM signal [ 31.113368] Monitor-Mwait will be used to enter C-1 state [ 31.113387] Monitor-Mwait will be used to enter C-3 state [ 31.113407] ACPI: acpi_idle registered with cpuidle [ 31.562346] fuse init (API version 7.22) [ 31.567380] dca service started, version 1.12.1 [ 31.572057] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI [ 31.572061] e1000e: Copyright(c) 1999 - 2016 Intel Corporation. [ 31.584537] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3 [ 31.584540] Copyright (c) 2007-2015 Intel Corporation. [ 31.595099] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.4.6 [ 31.595103] Copyright(c) 1999 - 2016 Intel Corporation. [ 31.595145] ixgbe unsupported_sfp_notify proc entry initialized [ 31.601177] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 1.5.19 [ 31.601181] i40e: Copyright(c) 2013 - 2016 Intel Corporation. [ 31.629362] tn40xx low_mem_msg proc entry initialized [ 31.629367] tn40xx low_mem_counter proc entry initialized [ 31.629370] tn40xx debug_msg proc entry initialized [ 31.629372] tn40xx: Tehuti Network Driver, 0.3.6.12.3 [ 31.644148] Loading modules backported from Linux version v3.18.1-0-g39ca484 [ 31.644152] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c [ 31.662243] Compat-mlnx-ofed backport release: cd30181 [ 31.662246] Backport based on mlnx_ofed/mlnx_rdma.git cd30181 [ 31.662248] compat.git: mlnx_ofed/mlnx_rdma.git [ 31.918131] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.00 ($DateTime: 2015/07/28 00:13:30 $) [ 31.995323] bio: create slab <bio-1> at 1 [ 31.995517] Btrfs loaded [ 32.038263] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 32.047169] sky2: driver version 1.30 [ 32.056180] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01 [ 32.065439] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42 [ 32.074647] QLogic/NetXen Network Driver v4.0.80 [ 32.079461] Solarflare NET driver v3.2 [ 32.084144] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 32.084148] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 32.088633] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 32.093103] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI [ 32.097660] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012) [ 32.098967] bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr xx:xx:xx:xx:xx:xx [ 32.100213] bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr xx:xx:xx:xx:xx:xx [ 32.101437] bnx2 0000:02:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr xx:xx:xx:xx:xx:xx [ 32.102651] bnx2 0000:02:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr xx:xx:xx:xx:xx:xx [ 32.112078] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012) [ 32.112087] bnx2 0000:01:00.0 eth0: Added CNIC device [ 32.112091] bnx2 0000:01:00.1 eth1: Added CNIC device [ 32.112095] bnx2 0000:02:00.0 eth2: Added CNIC device [ 32.112098] bnx2 0000:02:00.1 eth3: Added CNIC device [ 32.143109] usbcore: registered new interface driver ax88179_178a [ 32.147561] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 32.147568] ACPI: Power Button [PWRF] [ 32.158964] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 32.158968] Copyright (c) 2007 Atheros Corporation. [ 32.163523] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 32.163526] e100: Copyright(c) 1999-2006 Intel Corporation [ 32.167874] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k [ 32.167877] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 32.172344] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 32.172348] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 32.176696] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.7.12-k [ 32.176700] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. [ 32.190026] usbcore: registered new interface driver rtl8150 [ 32.194756] usbcore: registered new interface driver r8152 [ 32.201942] usbcore: registered new interface driver asix [ 32.206293] usbcore: registered new interface driver plusb [ 32.256046] 2017-9-21 1:33:35 UTC [ 32.256051] synobios: load, major number 201 [ 32.256055] Brand: Synology [ 32.256058] Model: DS-3615xs [ 32.256061] set group disks wakeup number to 4, spinup time deno 7 [ 32.756733] synobios cpu_arch proc entry initialized [ 32.756737] synobios crypto_hw proc entry initialized [ 32.756740] synobios syno_platform proc entry initialized [ 32.887284] systemd-udevd[7787]: starting version 204 [ 33.663908] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 33.692217] gre: GRE over IPv4 demultiplexor driver [ 33.737334] openvswitch: Open vSwitch switching datapath 2.4.1 [ 35.314728] device ovs-system entered promiscuous mode [ 35.318804] device ovs_eth2 entered promiscuous mode [ 35.319012] device eth2 entered promiscuous mode [ 35.319205] device eth1 entered promiscuous mode [ 35.319391] device eth0 entered promiscuous mode [ 35.320915] device ovs_bond0 entered promiscuous mode [ 35.321102] device eth3 entered promiscuous mode [ 35.322655] device ovs_eth3 entered promiscuous mode [ 35.323709] openvswitch: syno_ovs_store_bonds: is not a valid name of net_device [ 37.084392] device ovs_bond0 left promiscuous mode [ 37.094859] device eth1 left promiscuous mode [ 37.094997] device eth0 left promiscuous mode [ 37.104210] device ovs_bond0 entered promiscuous mode [ 37.123285] bnx2 0000:01:00.0: irq 81 for MSI/MSI-X [ 37.123294] bnx2 0000:01:00.0: irq 82 for MSI/MSI-X [ 37.123301] bnx2 0000:01:00.0: irq 83 for MSI/MSI-X [ 37.123308] bnx2 0000:01:00.0: irq 84 for MSI/MSI-X [ 37.123314] bnx2 0000:01:00.0: irq 85 for MSI/MSI-X [ 37.123320] bnx2 0000:01:00.0: irq 86 for MSI/MSI-X [ 37.123327] bnx2 0000:01:00.0: irq 87 for MSI/MSI-X [ 37.123334] bnx2 0000:01:00.0: irq 88 for MSI/MSI-X [ 37.123340] bnx2 0000:01:00.0: irq 89 for MSI/MSI-X [ 37.167283] bnx2 0000:01:00.0 eth0: using MSIX [ 37.167453] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.187222] bnx2 0000:01:00.1: irq 90 for MSI/MSI-X [ 37.187232] bnx2 0000:01:00.1: irq 91 for MSI/MSI-X [ 37.187238] bnx2 0000:01:00.1: irq 92 for MSI/MSI-X [ 37.187245] bnx2 0000:01:00.1: irq 93 for MSI/MSI-X [ 37.187251] bnx2 0000:01:00.1: irq 94 for MSI/MSI-X [ 37.187257] bnx2 0000:01:00.1: irq 95 for MSI/MSI-X [ 37.187264] bnx2 0000:01:00.1: irq 96 for MSI/MSI-X [ 37.187270] bnx2 0000:01:00.1: irq 97 for MSI/MSI-X [ 37.187276] bnx2 0000:01:00.1: irq 98 for MSI/MSI-X [ 37.231308] bnx2 0000:01:00.1 eth1: using MSIX [ 37.231472] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 37.242158] device eth0 entered promiscuous mode [ 37.242350] device eth1 entered promiscuous mode [ 37.242619] openvswitch: syno_ovs_store_bonds: is not a valid name of net_device [ 37.314295] device ovs_eth2 left promiscuous mode [ 37.325908] device eth2 left promiscuous mode [ 37.326628] openvswitch: syno_ovs_store_bonds: is not a valid name of net_device [ 37.342749] device ovs_eth2 entered promiscuous mode [ 37.343631] openvswitch: syno_ovs_store_bonds: is not a valid name of net_device [ 37.368171] bnx2 0000:02:00.0: irq 99 for MSI/MSI-X [ 37.368180] bnx2 0000:02:00.0: irq 100 for MSI/MSI-X [ 37.368186] bnx2 0000:02:00.0: irq 101 for MSI/MSI-X [ 37.368193] bnx2 0000:02:00.0: irq 102 for MSI/MSI-X [ 37.368199] bnx2 0000:02:00.0: irq 103 for MSI/MSI-X [ 37.368206] bnx2 0000:02:00.0: irq 104 for MSI/MSI-X [ 37.368212] bnx2 0000:02:00.0: irq 105 for MSI/MSI-X [ 37.368218] bnx2 0000:02:00.0: irq 106 for MSI/MSI-X [ 37.368225] bnx2 0000:02:00.0: irq 107 for MSI/MSI-X [ 37.412297] bnx2 0000:02:00.0 eth2: using MSIX [ 37.412468] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 37.419754] device eth2 entered promiscuous mode [ 37.420070] openvswitch: syno_ovs_store_bonds: is not a valid name of net_device [ 37.466904] device eth3 left promiscuous mode [ 37.467030] device ovs_eth3 left promiscuous mode [ 37.483375] openvswitch: syno_ovs_store_bonds: is not a valid name of net_device [ 37.499305] device ovs_eth3 entered promiscuous mode [ 37.500221] openvswitch: syno_ovs_store_bonds: is not a valid name of net_device [ 37.524938] bnx2 0000:02:00.1: irq 108 for MSI/MSI-X [ 37.524948] bnx2 0000:02:00.1: irq 109 for MSI/MSI-X [ 37.524954] bnx2 0000:02:00.1: irq 110 for MSI/MSI-X [ 37.524961] bnx2 0000:02:00.1: irq 111 for MSI/MSI-X [ 37.524967] bnx2 0000:02:00.1: irq 112 for MSI/MSI-X [ 37.524974] bnx2 0000:02:00.1: irq 113 for MSI/MSI-X [ 37.524980] bnx2 0000:02:00.1: irq 114 for MSI/MSI-X [ 37.524986] bnx2 0000:02:00.1: irq 115 for MSI/MSI-X [ 37.524993] bnx2 0000:02:00.1: irq 116 for MSI/MSI-X [ 37.569364] bnx2 0000:02:00.1 eth3: using MSIX [ 37.569539] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 37.576759] device eth3 entered promiscuous mode [ 37.577118] openvswitch: syno_ovs_store_bonds: is not a valid name of net_device [ 39.227147] init: dhcp-client (ovs_bond0) main process (12661) killed by TERM signal [ 40.357693] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 1000 Mbps full duplex [ 40.357782] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 40.421727] bnx2 0000:01:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex [ 40.421832] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 40.602797] bnx2 0000:02:00.0 eth2: NIC Copper Link is Up, 1000 Mbps full duplex [ 40.602891] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 41.025935] md: md2 stopped. [ 41.026910] md: bind<sda3> [ 41.027712] md/raid1:md2: active with 1 out of 1 mirrors [ 41.027734] md2: detected capacity change from 0 to 115096354816 [ 41.028050] md2: unknown partition table [ 41.028989] md: md4 stopped. [ 41.030345] md: bind<sdi6> [ 41.030568] md: bind<sdh6> [ 41.031316] md/raid1:md4: active with 2 out of 2 mirrors [ 41.031338] md4: detected capacity change from 0 to 6001154981888 [ 41.031628] md4: unknown partition table [ 41.033033] md: md3 stopped. [ 41.042876] md: bind<sdf5> [ 41.043037] md: bind<sdg5> [ 41.043253] md: bind<sdh5> [ 41.043774] md: bind<sdi5> [ 41.043952] md: bind<sde5> [ 41.044690] md/raid:md3: device sde5 operational as raid disk 0 [ 41.044694] md/raid:md3: device sdi5 operational as raid disk 4 [ 41.044697] md/raid:md3: device sdh5 operational as raid disk 3 [ 41.044698] md/raid:md3: device sdg5 operational as raid disk 2 [ 41.044700] md/raid:md3: device sdf5 operational as raid disk 1 [ 41.045788] md/raid:md3: allocated 5404kB [ 41.045817] md/raid:md3: raid level 5 active with 5 out of 5 devices, algorithm 2 [ 41.045819] RAID conf printout: [ 41.045821] --- level:5 rd:5 wd:5 [ 41.045823] disk 0, o:1, dev:sde5 [ 41.045825] disk 1, o:1, dev:sdf5 [ 41.045826] disk 2, o:1, dev:sdg5 [ 41.045828] disk 3, o:1, dev:sdh5 [ 41.045830] disk 4, o:1, dev:sdi5 [ 41.045864] md3: detected capacity change from 0 to 7981807435776 [ 41.054151] md3: unknown partition table [ 41.312869] bio: create slab <bio-2> at 2 [ 41.347057] bnx2 0000:02:00.1 eth3: NIC Copper Link is Up, 1000 Mbps full duplex [ 41.347064] , receive & transmit flow control ON [ 41.347151] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready [ 41.492161] init: dhcp-client (ovs_bond0) main process (12939) killed by TERM signal [ 41.742283] init: dhcp-client (ovs_eth2) main process (13135) killed by TERM signal [ 42.202851] BTRFS: device label 2017.09.07-04:31:32 v8451 devid 1 transid 41090 /dev/vg1000/lv [ 42.203330] BTRFS info (device dm-0): disabling disk space caching [ 42.203337] BTRFS: has skinny extents [ 42.207532] BTRFS: device label 2017.09.07-04:22:33 v8451 devid 1 transid 40473 /dev/md2 [ 42.208159] BTRFS info (device md2): disabling disk space caching [ 42.208166] BTRFS: has skinny extents [ 42.490261] init: dhcp-client (ovs_eth3) main process (13572) killed by TERM signal [ 48.359591] usbcore: registered new interface driver usblp [ 48.397589] usbcore: registered new interface driver usbhid [ 48.397594] usbhid: USB HID core driver [ 48.402626] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input1 [ 48.402693] hid-generic 0003:0624:0248.0001: input: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0 [ 48.402858] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input2 [ 48.403087] hid-generic 0003:0624:0248.0002: input: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1 [ 51.795399] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 51.879742] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 52.853014] loop: module loaded [ 54.809268] NFSD: starting 90-second grace period (net ffffffff81854380) [ 55.480608] iSCSI:target_core_rodsp_server.c:1017:rodsp_server_init RODSP server started, login_key(0024e84b993c). [ 55.500901] iSCSI:extent_pool.c:757:ep_init syno_extent_pool successfully initialized [ 55.517946] iSCSI:target_core_device.c:569:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 55.518188] iSCSI:target_core_lunbackup.c:358:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully [ 55.591141] iSCSI:target_core_file.c:89:fd_attach_hba RODSP plugin for fileio is enabled. [ 55.591158] iSCSI:target_core_ep.c:831:ep_attach_hba RODSP plugin for epio is enabled. [ 55.591163] iSCSI:target_core_ep.c:838:ep_attach_hba ODX Token Manager is enabled. [ 56.127578] FAT-fs (sdw1): FAT: nls_disk load default table [ 56.135844] FAT-fs (sdw1): FAT: nls_io load default table [ 56.159435] FAT-fs (sdw1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 57.216186] FAT-fs (sdw2): FAT: nls_disk load default table [ 57.224506] FAT-fs (sdw2): FAT: nls_io load default table [ 57.248050] FAT-fs (sdw2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 58.432877] ata1.00: configured for UDMA/133 [ 58.432885] ata1: EH complete [ 59.057566] ip_tables: (C) 2000-2006 Netfilter Core Team [ 59.626331] ata1.00: configured for UDMA/133 [ 59.626339] ata1: EH complete [ 59.628147] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 59.725905] aufs 3.10.x-20141110 [ 59.758673] Bridge firewalling registered [ 61.995551] init: pkgctl-deluge pre-start process (23475) terminated with status 1 [ 62.496202] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 62.643872] device docker4aac6d6 entered promiscuous mode [ 62.643975] IPv6: ADDRCONF(NETDEV_UP): docker4aac6d6: link is not ready [ 62.643980] docker0: port 1(docker4aac6d6) entered forwarding state [ 62.643991] docker0: port 1(docker4aac6d6) entered forwarding state [ 62.644046] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready [ 62.900090] device docker288042b entered promiscuous mode [ 62.900179] IPv6: ADDRCONF(NETDEV_UP): docker288042b: link is not ready [ 62.900184] docker0: port 2(docker288042b) entered forwarding state [ 62.900195] docker0: port 2(docker288042b) entered forwarding state [ 63.387719] docker0: port 1(docker4aac6d6) entered disabled state [ 63.387794] docker0: port 2(docker288042b) entered disabled state [ 63.624496] cgroup: docker-runc (24429) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 63.683223] docker0: port 2(docker288042b) entered disabled state [ 63.683429] device docker288042b left promiscuous mode [ 63.683433] docker0: port 2(docker288042b) entered disabled state [ 63.840132] IPv6: ADDRCONF(NETDEV_CHANGE): docker4aac6d6: link becomes ready [ 63.840175] docker0: port 1(docker4aac6d6) entered forwarding state [ 63.840189] docker0: port 1(docker4aac6d6) entered forwarding state [ 64.150630] FAT-fs (synoboot2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 78.871187] docker0: port 1(docker4aac6d6) entered forwarding state Hide
  3. I'm waiting for an answer on this as well. After booting the boot loader I can't find the machine on my network.