RedCat
-
Posts
55 -
Joined
-
Last visited
Everything posted by RedCat
-
How can I do this? After loader boot, it dont find any hdd...
-
I tired again 920+ 7.1 install on proxmox. I made loader, boot, I show and upload pat file. It goed to 100% install and reboot. It starts counting down from 10 minutes. And counting and counting... And 00:00 And nothing happend. Has anyone already installed 920+ on proxmox?
-
Thanks for information. I made test with E1000 card: (Proxmox <-> DSM) [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 6.72 GBytes 5.78 Gbits/sec 0 sender [ 5] 0.00-10.00 sec 6.72 GBytes 5.77 Gbits/sec receiver Virtio is really faster, but I think E1000 is enough also Maybe i make now loader with virtio in afternoon, I will test it also...
-
How can I make this test?
-
In proxmox has only e1000, havent e1000e
-
I tired e1000 and virtio also. For me E1000 faster and lower cpu usage than virtio.
-
If you need sata0 then use usb boot. I think there is no other advantage. If use sata0 then you can see in gui, you can detach, delete, reconnect etc with one click. With usb dont. Sata use: qm importdisk 107 /path/of/the/loader/tinicore-redpill.v0.4.6.img local-lvm 107: number of your VM I use this ext for acpi: ./rploader.sh ext apollolake-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json It is work with 918+ 8 times out of 10 I tired it with 3622 also, but dont work for me.
-
Usb vid/pid does not matter. I think satamap is neccesary, I always use satamap command. Easy way: use RP loader sata0 and boot sata0 Hard way: you can boot from usb also, but you cant set it in GUI, you need use command line: args: -drive 'if=none,id=synoboot,format=raw,file=/var/lib/vz/images/109/tinycore-redpill.img' -device 'qemu-xhci,addr=0x18' -device 'usb-storage,drive=synoboot,bootindex=5' It boot from usb The acpi button works for me 918+ 7.1 on Proxmox
-
Is there any solution to the 920+ 7.1 hdd detection problem during VM?
-
You got a little misunderstood. It doesn’t matter to me what the DSM shows. I want know that, if it's worth giving more than 4 cores to the virtual machine? I gave it 6 core. Can DSM use more than 4 cores?
-
Hello I am using the 918+ with dsm 7.1.0-42661 on Proxmox. I give the VM 6 GB ram and 6 core CPU. But I checked the inforation panel in DSM and it show only 4 core. The DSM can use 6 core (and just show 4 in info panel), or DSM can use only 4 core with 918+?
-
I tired your methold. I do it step by step. Virtio lan work, but ACPID not! I cant shutdown the VM with the Button in the Proxmox Web GUI! What is diferent?
-
Yes, I dont understand too. After serialgen command, I edit the config file, and delete generated mac address, and I write into manualy the mac address of my VM lan card.
-
I tired and install 2 new VM system on proxmox. All hardware are same (4 cpu, 4 GB ram, sata0=redpill, sata1= 100GB virtual disk and Virtio lan card) VM1: 918+ 7.0.1 The Redpill auto detect Virtio lan card, build loader, 7.0.1 starting, no need any extension VM2: 918+ 7.1.0 The Redpill dont "see" the Virtio lan card, build loader, boot, but the loader dont has IP address, I cant access the DSM Why, and what happend?
-
Yes I know vmware network card is working. I think this card emulation is not the best way under proxmox. Emulating an emulated card in another system is not the best solution... And in my host has 2.5 GB ethernet card + 10 GB switch. I want to use more than 1 GB lan speed with nas. This way I need e1000 or virtio driver too. 920+ I tired virtual and real hdd also, but dont detect.
-
If I use your script without sudo then it make that errors i posted it you before. If use sudo ./m.sh DS918+ then ths script run successfully. I asked you, can you add that 2 lan extension to your script? If not, then how can we (proxmox users) use any extension?
-
with sudo its working fine also on proxmox. an idea: maybe it is possibe, the script will ask I want or not install e1000 or/and virtio lan card extension. It is important for proxmox useres. The acpi dont work under proxmox in 7.1 918+. Does the acpi extension be added automatically by the loader? Something news about 920+ hdd detection?
-
I tired your ./m.sh DS918+ command in new Proxmox VM. I have some errors:
-
I used this link: https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/rpext-index.json I can add the ext, and I can build the image. The function not working. If I press the power button, nothing happend. Under 7.0.1 it is work, I press button DSM shut down, but unter 7.1 nothing happend. I tired your link also:
-
It found hdd too? I can boot 920+ with 7.1, but dont find hdd
-
Not working, I tired and wrote here some days ago...
-
I added the acpi extension to loader: ./rploader.sh ext apollolake-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-acpid/rpext-index.json The build is successfull, it write acpi2 added to loader I start the dsm 7.1, it boot, but the power button dont work. If I press it, the dsm dont halt. I tired it before under 7.0.1, there it worked
-
Does everyone else work and find hdds 920+ with 7.1?
-
I do not know. How can I watch it? I didn't add more extension. I made a new VM on proxmox with vmware lan, and: update fullupgrade serialgen DS920 + satamap change mac address backup build geminilake-7.0.1-42218 It start, and show me that error Maybe you know, why dont find any hdd 920+ on 7.1?
-
It was unsuccessful
