-
Posts
74 -
Joined
-
Last visited
Posts posted by Onknight
-
-
-
3 hours ago, rojoone2 said:
What card did you remove from the DellT110? Are you able to flash that to IT mode?
This is what I took out I don't know anything about flashing and it mode
I have standard 5 IDE ports and I'm using all five right now I have an IDE card I'm going to install
I actually have this card up for sale because I have no use for it
-
Okay so I'm already thinking ahead
My old case server case Antec P183 had tons of room but it's falling apart
The Del case is fine for now but I want to eventually get a case that can contain 12 swappable Bays
Doing a search on line has left little to be excited at so far a Antec P101 Silent Performance has 11 bays
is the best I can . 9 Front bays and 2 SSD in the rear.
I'm using all five SATA ports on the original board
I have SATA where are four ports work that gets me up to 9
And I'll have to find a second card to add the other three ports to get me up to 12
-
I am thinking of adding X540T1 X540-T1 to my DS3622xs+.
I see a X40t2 is tested I am good to go ?
-
1 hour ago, rojoone2 said:
I think you will be fine for years to come, especially with the hardware frendly DS3622xs+.
Don't be too concerned keeping up with the latest DSM updates, I still have a box that I run DSM 6.2.3-25423 on.
The others I have updated to 7.1.1, but one of them is just for testing.
Don't update until its okay to do so from the developers.. especially since this is your production box.
See here:
As far as 10 gig NIC cards go, I don't use any because as of right now, I don't have a need to..
But @painkiller895 noted that they tried an Intel X520-SR2 that works out of the box:
Thanks I thinking of X520-SR1 or Nvidia Mellanox MCX312B-XCCT but for Mellanox I need adapters for them
-
Question are Nic Cards that work out of box to get 10 Gbps on my Xpenology nas
Thinking of upgrading to Cat 7 Cables my work is getting point i need to able to move files quickly
-
My only concern now is 7.2 is on the way
And I'm wondering it will be ready so our systems can keep going
This particular version of software is just so user-friendly
I tried truenas and I hated it it's not user-friendly at all
And I don't like openmediavault either
-
Will that's nice about this one. it was not cobbled together out of Scraps
it made it simple The last Computer was Core 2 Duo with 4 gigs of ram and bunch hard drives
after a while I lost use to onboard SATA and hard use a SATA Card and NIC Card
it was just time to start over
-
I haven't been here in a while
But my xpenology Gave up the ghost and Brought a Dell PowerEdge T110 Server Tower
I ended up removing the SAS card and just using SATA
Following the instructions from this youtube Vid
Was able to Get the Dell Running fine on 7.1 Thank to everyone who help with this hobbie
- 3
-
is there anyway to block the updates Till we have a solution to for them to install correctly
I'm still on 6.2.3-25426 Update 3 It keeps sending Messages to update Phone every few hours ..
Annoying as hell
-
Hey everybody I might be able to get my hands on a DELL PowerEdge 2900 server
Has anyone used one of these cuz I can pick it up pretty cheap
-
@ig88 Yes but I goofed the original motherboard model I give you is not the motherboard I actually have
When I went into the bios for my board I saw the correct model number
I then did a Google search and found the manual it does not the ability ahci it was not included in the Bios
I even Flash the BIOS to the newest version
I search the Manual Yes some board in PB5-VM Series to have AHCI but SE Model is not one ...
This is PB5-VM SE motherboard unfortunately
-
2 hours ago, IG-88 said:
afaics thats mcp78
https://de.wikipedia.org/wiki/Nvidia_nForce_700
and thats ahci compatible in linux
https://ata.wiki.kernel.org/index.php/SATA_hardware_features
so check you bios settings for sata to be ahci
I gave you wrong Model of motherboard P5B-VM SE came out around 2007 is the correct Model
Unfortunally desktop Intel chipsets ICH9 and less are not supporting AHCI mode.Only ICH10 and some ICH9 supports it (P35 chipset).
I not found the switching option for AHCI, so the mb doesn't support AHCI. @IG-88 -
@ig88
Unfortunally desktop Intel chipsets ICH9 and less are not supporting AHCI mode.Only ICH10 and some ICH9 supports it (P35 chipset).
I not found the switching option for AHCI, so this mb doesn't support AHCI.
so I am out luck unless you guys have any ideas -
Motherboard is this PB5-VM SE
dose not have ACHI mode bit they may be a solution I've included the link
-
1 hour ago, IG-88 said:
the chipset might be mcp78 and thats supported in linux ahci driver that is part of dsm
any log like /var/log/dmesg ?
check the bios, maybe rest it to defaults and look for sata to be in ahci mode
i dont see much difference in ahci and kernel between 6.1 and 6.2, should work the same in both
I looked into Setting it old core 2 Dual Motherboard m3n78-vm and looks like dose not have ACHI mode
http://static.highspeedbackbone.net/pdf/(e3849)_m3n78-vm.pdf Manual for the board @IG-88
-
-
I had an idea and I wanted to run it by the group
Has anyone ever used an Intel crypto mining board how to make a server
With all the extra PCI Lanes you could you Serial SATA cards amount the maximum number of drives
-
-
Asus Motherboard m3n78-vm for SATA Ports ..
For DS3615XS using bootloader synoboot_3615 Jun's Loader v1.03b
My SATA Cardworks but OS dose not see the Onboard SATA
-
I did major upgrade and changed loaders. And motherboard is an NVIDIA chipset don't like like they are supported
my SATA card is working but losing 4 Good SATA Onboard ports sucks could use some help here @IG-88 or anyone who has solution for me would be appreciated
Thank you again for this great community in advance
-
-
is there a way someone could a video tutorial on how to do this
Unfortunately I'm a visual learner and I don't pick up things well unless it's in a video format
Thanks in advance
-
I would love to run Active Backup for Business but I see we're being froze out
Is there something similar I could run that would do a closed job
DSM 7.1.1-42962 Update 5
in DSM Updates Reporting
Posted
Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42692 Update 5
- Loader version and model : Automated RedPill Loader ARPL 1.1-beta2a - DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL -Intel Zeon Dell T1100
- Additional comments: Updated via DSM GUI