MSXGames
-
Posts
20 -
Joined
-
Last visited
Posts posted by MSXGames
-
-
17 hours ago, Peter Suh said:
Why don't you try it with my M SHELL?
Since M SHELL uses an integrated module like ARPL, it is not dependent on the configuration of each Synology model.
No problem with r8168 on DS923+.
Please refer to the link below for the menu structure of M SHELL.Install M SHELL with the command below and run menu.sh.
curl -L "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz" -O;tar -zxvf my.sh.gz;
./menu.sh
Hi,
Thank you so much for this.
Finally I got it to work and it even can be updated to update 3.
It took me a while to have it working, but your solution is great and works after a few installation steps.
It works on the AMD system.
Kind regards
-
1
-
-
On 1/30/2023 at 10:36 AM, Peter Suh said:
The latest custom_config.json already includes it.
It looks like you didn't do the fullupgrade process.
https://github.com/pocopico/tinycore-redpill/blob/main/custom_config.json#L1417
I have tried to install DS923+, but I get an error when building the image:
Spoiler[#] Extension dtbpatch for ds923p_42962 platform is already up to date
[-] The extension pocopico.r8168 was found. However, the extension index has no recipe for ds923p_42962 platform. It may not be
[-] supported on that platform, or author didn't updated it for that platform yet. You can try running
[-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about
[-] the extension stored locally:
[#] ========================================== pocopico.r8168 ==========================================
[#] Extension name: r8168
[#] Description: Adds RealTek RTL-8168 Gigabit Ethernet driver Support
[#] To get help visit: <todo>
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/r8168
[#] Software author: https://github.com/pocopico
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/r8168/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds1621p_42951 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 dva3221_42962 ds918p_42661 ds3622xsp_42962 ds3617xs_42951 dva1622_42218 dva1622_42621 ds920p_42962 ds1621p_42661 dva1622_42951 ds918p_25556 dva3221_42218 ds3615xs_42661 dva3221_42951 ds3622xsp_42661 ds2422p_42661 ds3622xsp_42218 ds2422p_42962 rs4021xsp_42621 dva1622_42962 ds2422p_42218 rs4021xsp_42962 dva3221_42621 ds3615xs_42962 ds3617xs_42962 ds3615xs_41222 ds920p_42951 rs4021xsp_42218 ds2422p_42951 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 rs4021xsp_42951 ds920p_42621 ds918p_42962 ds3615xs_42951 ds3622xsp_42951 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds1621p_42962 ds3622xsp_42621 rs4021xsp_42661
[#] =======================================================================================[-] Failed to update recipe for pocopico.r8168 extension for platform ds923p_42962. The script will terminate as you do not
[-] have previously downloaded recipe which can be used if download fails. Try again later. If problem
[-] persists contact the extension packer for support (displayed below)
[#] ========================================== pocopico.r8168 ==========================================
[#] Extension name: r8168
[#] Description: Adds RealTek RTL-8168 Gigabit Ethernet driver Support
[#] To get help visit: <todo>
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/r8168
[#] Software author: https://github.com/pocopico
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/r8168/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds1621p_42951 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 dva3221_42962 ds918p_42661 ds3622xsp_42962 ds3617xs_42951 dva1622_42218 dva1622_42621 ds920p_42962 ds1621p_42661 dva1622_42951 ds918p_25556 dva3221_42218 ds3615xs_42661 dva3221_42951 ds3622xsp_42661 ds2422p_42661 ds3622xsp_42218 ds2422p_42962 rs4021xsp_42621 dva1622_42962 ds2422p_42218 rs4021xsp_42962 dva3221_42621 ds3615xs_42962 ds3617xs_42962 ds3615xs_41222 ds920p_42951 rs4021xsp_42218 ds2422p_42951 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 rs4021xsp_42951 ds920p_42621 ds918p_42962 ds3615xs_42951 ds3622xsp_42951 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds1621p_42962 ds3622xsp_42621 rs4021xsp_42661
[#] =======================================================================================[!] Cannot continue due to previous errors (see above)
*** Process will exit ***
[!] Failed to update all extensions for ds923p_42962 platform - see errors above*** Process will exit ***
FAILED : Loader creation failed check the output for any errorsI do not know what is going wrong, if I am correct, the error is about the realtek ethernet chip, is that correct?
I did a full update (it updated to 0.9.4.3) and a full upgrade as well.
Kind regards
-
13 hours ago, Peter Suh said:
I recently tested TCRP FRIEND on an older AMD system,
DS1621+ (AMD Ryzen v1000) was also able to operate, but
DS923+ (AMD Ryzen r1000) seems to work more flexibly.
Would you like to try the migration by changing the model to DS923+?
On AMD systems, TCRP FRIEND only works on v1000 and r1000 platforms.
Hi,
Sure I want to try the model DS923+
But I think it is not in TCRP (redpill) of PocoPico right ?
I also have tried without FRIEND, still same issue
-
Hi All,
I have a pc with an AMD A4-5000 APU, with a Realtek RTL8111E network card.
With version DSM 7.0.1 it was running fine, after a update to DSM 7.1.1, it looks like the network card is not running.
I have tried withfriend and if it is booted I see a ip adress, but when I type that IP address it is not going to DSm, also tried with find.synology.com, same issue, the server is not responding.
I have used DS1621+ aswell DS2422+
Any ideas ?
Do I need to add some extensoin?
I have tried with a clean install, so removed the hard drives and put empty in the system.
I have tried with EUFI and Legacy mode (No UEFI), same issues
Kind regards
-
Yes you are correct, the model RS3621xs+ is a dual power station, my bad, I thought this one was a single power station.
Then this model is not good to make a TCRP version.
ALmost all versions are with two power supply's.
Only the AMD versions has one power supply, will take a look for a model, because the 3618 model is 4 years old now.
Thank you for pointing me about the two power supply's
Kind regards
-
1
-
-
32 minutes ago, pocopico said:
Sure but which one are you thinking and what purpose will it serve ? Can you please explain ? I mean what are the missing features that the new platform will bring ?it’s not very difficult to introduce a new moral but it’s very hard to maintain all these platforms.
Hi @pocopico
I was thinking about the RS3621xs+, that has a 8core intel xeon cpu and 12 bays.
And because I am running it on a server in a rack, the name makes it a little bit easier.
It also can handle up to two 10Gbit ethernet cards.
I know we can run DS3822xs+ on a server (I am running one as a bare metal), but because of the name RS (Rack System) makes it a bit easier.
If you can add and it is possible, I will appriciate it very much.
Thank you
Kind regards
-
Hi All,
In TCRP we have a lot of DS models.
Is there also a RS model coming in TCRP ?
Kind regards
-
Hi All,
I have a question, I couldn't find it so hopefully someone can answer it.
I have a Dell R210 II with Broadcom network adaters, the server starts and TPRP is starting, but it will not connect to the internet, even when the cable is connected.
I have put in a Intel i225 (2.5 Mhz) netwerk card in the server, the server start and TCRP is loading, but no internet connection.
When I do lspci -nnq I see all the network adapters in the list (broadcom and intel i225).
Are these network adapters not loaded or are there no drivers ?
Thank you.
-
10 hours ago, Alekc said:
Hello! Thank you @pocopico for hard work!
I've got baremetal installation with 918+.
After update form 7.01 to 7.1 application center have no internet connection and I can't install any apps.
Somebody know something about it?
Check if yout ime setting are okay.
I had this issue once, when done a time setting all was fine.
You can use the sync button.
-
17 minutes ago, Dvalin21 said:
I have the t320 on 7.1. if your using SAS card (h310,h200, etc) one make sure the card is flashed to IT Mode, in user_config.json get rid of satamap and diskid and add "SasIdxMap": "0". If you are using the embedded Satas controller (6 Sata) then you need to us satamap and diskid: Satamap 6 and Diskid 00 and keep SasIdxMap. Hope this helps.
Thank you for the tip and explanation.
I do not use a raid card, not on the SuperMicro or the Dell server for this test.
I know you need it in IT mode, but the sata ports are fast enough, so I do use the build in sata controller.
If the satamap is on 6, DSM does not see any drives and sata is off.
But if I use 46 in the satamap and diskid 0000 as I mentioned before, all sata ports are active and I can use the drives.
-
Hi All,
First of all, thank you @pocopico and @Peter Suh
Here are my findings.
Last week I was testing to install DSM 7.0.1-42218 on several machines.
First I used a SuperMicro server with an Intel Xeon L5630 cpu and 24Gb of ram.
So far so good, I could install version 7.0.1-42218 and installation is successfull.
After reading a lot posts over here, I tried to upgrade from 7.0.1-42218 to 7.1.0-42661 and it failed using the instruction of @Peter Suh
Even if I first installed 7.0.1-42218 complete and then upgrade, it failed, keeps nagging about corrupt file.
When I tried to do a fresh install, samething, keeps nagging about corrupt file, even when I downloaded the file from the cache on TC, same thing.
The following instructions was entered:
Quote[DS3622xs+]
./rploader.sh update now
./rploader.sh fullupgrade now
./rploader.sh serialgen DS3622xs+
./rploader.sh identifyusb now
./rploader.sh satamap now (changed the diskidxmap to: 0000)
./rploader.sh build broadwellnk-7.0.1-42218
./rploader.sh clean now
./rploader.sh build broadwellnk-7.1.0-42661
./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now;
Then after hours of trying I used the Dell R320 to give it a try.
Installing DSM 7.0.1-42218, perfect it runs and see all the drives.
The did a full wipe (so to have a clean installation, even drives where wiped).
Entered the instructions as noted by @Peter Suh
And it starts up to DSM 7.1, but just with one drive (no other sataport/drive where found).
Again, started to TC, did a clean instruction and changed the satamap to the following:
"SataPortMap": "46",
"DiskIdxMap": "0000"rebuild everything again with ./rploader.sh build broadwellnk-7.1.0-42661
rebooted the server and started to DSM 7.1, did the installation steps en all drives where found.
It looks like something about which components you use ?
With every server I used, I have changed the mac adres to the mac adres from the nic's
I have installed now DS918+ on an asrock motherbord with an Apollo Lake cpu on it running DSM 7.0.1-42218
Will try to do an upgrade to DSM 7.1.0-42661 next time and will write to outcome here.
Thank you for reading this post
Kind regards
-
1
-
-
25 minutes ago, altas said:
@MSXGameswhy not pre-download tha pat file befor start the building and put it in the Cache Folder ??
Well, I have checkt with a vpn connection to an other country, and the the site is working and redpill is working.
Now checkt it with vpn on and installing thru the app and it is working, slow yes, but it is downloading it.
Sorry for the inconvience and thank you for the help.
Still I do not know what the problem is, but he, it worked now.
-
2 minutes ago, pocopico said:
I have no answer to that my friend. I think synology does all the redirection to the closest mirror. I happen to also end in chinas mirror that is SLooowwwwOkay, thank you for the answer
-
I have ask it several times?
Is it possible to change the download path dor the .pat files to https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS3622xs+_42218.pat
I am trying to install DS3622xs+, but it will not download from https://cndl.synology.cn/download/DSM/release/7.0.1/42218/DSM_DS3622xs+_42218.pat
Thank you very much!!
ps: I know I have ask several times in this threath, but still no answer.
-
18 minutes ago, altas said:
from where you have the TS3 Server?? as i can not find it in the Package Center
You can install it in a docker application.
Search for teamspeak
If it is still updatet, you can use the latest one.
Kind regards
After installation --->
First of all set the environment variable: TS3SERVER_LICENSE => accept
and map a directory to "/var/ts3server/" in the Volume tab, for example: docker/ts3_data => /var/ts3server/
ps: I do not know if things has changed, I do not use it anymore.
-
Quote
Why is tinycore downloading the dsm .pat file from this China site?
[#] Updating extensions... [OK]
[#] PAT file /home/tc/redpill-load/cache/ds3617xs_42218.pat not found - downloading from https://cndl.synology.cn/download/DSM/release/7.0.1/42218/DSM_DS3617xs_42218.patThe site is often down and cannot download it, then you get an error message
I have tried it with DS3622xs+ and DS3617xs, both time gives time out and install stops.
Where can you change the download directory to https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS3622xs+_42218.pat
It worked once the download, but now I am trying to download and install again and keeps failing.
Thank you
Kind regards
@pocopico Do you have changed this or can and will you share where to change the download settings ?
-
14 minutes ago, altas said:
strange.. i never had any problem to downlod from cndl.. i did it right now.
why not pre-download and but it in the cach Folder ?
Yesterday I had no issues, could download it easy.
But today, it will not download, it does not matter which version.
I can download it from the global site without any issues.
So maybe using the global sit makes it easier ?
If I put it in the cache folder, the script failed:
QuoteStarting loader creation
Checking user_config.json : Done
Cache directory OK
sudo: ./build-loader.sh: command not found
FAILED : Loader creation failed check the output for any errors -
Why is tinycore downloading the dsm .pat file from this China site?
[#] Updating extensions... [OK]
[#] PAT file /home/tc/redpill-load/cache/ds3617xs_42218.pat not found - downloading from https://cndl.synology.cn/download/DSM/release/7.0.1/42218/DSM_DS3617xs_42218.patThe site is often down and cannot download it, then you get an error message
I have tried it with DS3622xs+ and DS3617xs, both time gives time out and install stops.
Where can you change the download directory to https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS3622xs+_42218.pat
It worked once the download, but now I am trying to download and install again and keeps failing.
Thank you
Kind regards
-
On 1/23/2021 at 12:50 PM, IG-88 said:
no, i'm not using kvm/proxmox and dont test this and i have not seen a positive feedback of people loading the modules manually in integrated in the current releases of the extra.lzma
(you can open the extra.lzma with 7zip and extract the virtio modules to test them)
I am using proxmox with Intel X520-DA2 network card. It has 2 sfp+ (10Gb) on it.
If you pass through the card, it will word, just choose pci device.
I am using synology ds3617xs with jun 1.03b loader (no extra loaders).
It is working fine, just tested it today and the speed is 10Gbs.
RS4021xs+ loader development thread
in Developer Discussion Room
Posted
Hi,
I have tested the RS4021xs+ version on a Dell R320, Intel E5-2450L V2 with 48Gb ram, 4x 2Tb HDD, sata (no hardware raid controller) and the standard broadcom network cards.
The version DS3622xs+ is working fin on the system.
When installing version RS4021xs+, it will not find the server. tested with TCRP and ARPL
Without bringing the friend and with bringing the friend over.
When installing RS3618xs, the server can be found, but installing DSM will give and error, a corrupted file.
Anychange I am doing it wrong or the version are not suitable for the Dell R320
Kind regards