obee
Transition Member-
Posts
9 -
Joined
-
Last visited
Everything posted by obee
-
XPEnology DS3612xs DSM 4.1 build 2668++ (more hardware)
obee replied to Andy928's topic in DSM 5.2 and earlier (Legacy)
You have it defined in "Synology Assistant" -
Synology DS3612xs - DSM 4.2 build 3202
obee replied to odie82544's topic in DSM 5.2 and earlier (Legacy)
Thanks a lot! It (ver4.2) works smoothly, even with the USB 2.0 driver for my motherbroad. -
Synology DS3612xs - DSM 4.2 build 3202
obee replied to odie82544's topic in DSM 5.2 and earlier (Legacy)
make it anew The link in page 1 is not working, do you have any alternative? thanks -
My Atom MB also no show in "Resource Montitor", below is my dmesg: [ 20.551893] synobios: load, major number 201 [ 20.552013] Brand: Synology [ 20.552201] Model: DS-3612xs [ 20.552346] set group disks wakeup number to 4, spinup time deno 7 [ 20.561976] synobios: unload [ 25.973720] synoacl module [synoacl_ext4] is not loaded [ 25.973819] synoacl module [synoacl_vfs] is not loaded [ 25.990609] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0) [ 26.018709] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 26.018900] VFS: Mounted root (ext4 filesystem) readonly on device 9:0. [ 26.019016] Trying to move old root to /initrd ... okay [ 26.031137] Freeing unused kernel memory: 468k freed [ 26.031424] Write protecting the kernel read-only data: 8192k [ 26.036118] Freeing unused kernel memory: 728k freed [ 26.039233] Freeing unused kernel memory: 384k freed [ 26.220193] EXT4-fs (md0): re-mounted. Opts: (null) [ 27.457162] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across: 2097084k [ 27.513132] NET: Registered protocol family 10 [ 27.565855] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 27.566288] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 27.578262] usbcore: registered new interface driver usbfs [ 27.579299] usbcore: registered new interface driver hub [ 27.581435] usbcore: registered new device driver usb [ 27.687523] acpi_cpufreq: Unknown symbol cpufreq_get_measured_perf (err 0) [ 27.719370] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel) [ 27.730473] dca service started, version 1.12.1 [ 27.738737] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.6.7-k [ 27.738884] ixgbe: Copyright (c) 1999-2011 Intel Corporation. [ 27.757904] crypto: exports duplicate symbol __crypto_alloc_tfm (owned by kernel) [ 27.771438] crypto_algapi: exports duplicate symbol __crypto_dequeue_request (owned by kernel) [ 27.780004] crypto_wq: exports duplicate symbol kcrypto_wq (owned by kernel) [ 27.794339] crypto_blkcipher: exports duplicate symbol __ablkcipher_walk_complete (owned by kernel) [ 27.803344] crypto_hash: exports duplicate symbol ahash_attr_alg (owned by kernel) [ 27.824938] aead: exports duplicate symbol aead_geniv_alloc (owned by kernel) [ 27.841048] pcompress: exports duplicate symbol crypto_alloc_pcomp (owned by kernel) [ 27.851042] cryptomgr: exports duplicate symbol alg_test (owned by kernel) [ 27.882121] aes_generic: exports duplicate symbol crypto_aes_expand_key (owned by kernel) [ 27.892957] rng: exports duplicate symbol crypto_default_rng (owned by kernel) [ 27.946325] aes_x86_64: exports duplicate symbol crypto_aes_decrypt_x86 (owned by kernel) [ 27.963988] sha1_generic: exports duplicate symbol crypto_sha1_update (owned by kernel) [ 27.993692] cryptd: exports duplicate symbol cryptd_ablkcipher_child (owned by kernel) [ 28.005894] Intel AES-NI instructions are not detected. [ 28.029575] fuse: Unknown symbol do_aggregate_recvfile_flush (err 0) [ 28.051961] libcrc32c: exports duplicate symbol crc32c (owned by kernel) [ 28.065007] zlib_deflate: exports duplicate symbol zlib_deflate (owned by kernel) [ 28.103911] Btrfs loaded [ 28.185882] synobios: load, major number 201 [ 28.185983] Brand: Synology [ 28.186162] Model: DS-3612xs [ 28.186292] set group disks wakeup number to 4, spinup time deno 7 [ 28.597798] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.632013] ata5.00: configured for UDMA/100 [ 36.632116] ata5: EH complete [ 36.636429] ata7.00: configured for UDMA/100 [ 36.636547] ata7: EH complete [ 36.755752] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 36.755963] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 36.756173] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 36.756182] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 36.756333] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 36.756551] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 36.756672] ehci_hcd 0000:00:1d.7: debug port 1 [ 36.760649] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 36.760687] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0700400 [ 36.770415] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 36.771171] hub 1-0:1.0: USB hub found [ 36.771281] hub 1-0:1.0: 8 ports detected [ 36.790334] xhci_hcd: Unknown symbol blk_timeout_factory (err 0) [ 36.807915] uhci_hcd: USB Universal Host Controller Interface driver [ 36.808197] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 36.808321] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 36.808331] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 36.808513] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 36.808713] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0 [ 36.810775] hub 2-0:1.0: USB hub found [ 36.810904] hub 2-0:1.0: 2 ports detected [ 36.812402] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 36.812532] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 36.812541] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 36.812668] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 36.812895] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080 [ 36.815122] hub 3-0:1.0: USB hub found [ 36.815235] hub 3-0:1.0: 2 ports detected [ 36.817468] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 36.817591] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 36.817601] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 36.817733] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 36.817954] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060 [ 36.823923] hub 4-0:1.0: USB hub found [ 36.824043] hub 4-0:1.0: 2 ports detected [ 36.826911] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 36.827038] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 36.827048] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 36.827173] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 36.827425] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040 [ 36.833456] hub 5-0:1.0: USB hub found [ 36.833665] hub 5-0:1.0: 2 ports detected [ 36.894492] Initializing USB Mass Storage driver... [ 36.895704] usbcore: registered new interface driver usb-storage [ 36.895811] USB Mass Storage support registered. [ 36.921789] usbcore: registered new interface driver usblp [ 37.005714] usbcore: registered new interface driver usbhid [ 37.005877] usbhid: USB HID core driver [ 37.288890] usb 1-8: new high-speed USB device number 4 using ehci_hcd [ 37.424172] Got empty serial number. Generate serial number from product. [ 37.425033] hub 1-8:1.0: USB hub found [ 37.425310] hub 1-8:1.0: 4 ports detected [ 37.652525] usb 3-2: new full-speed USB device number 2 using uhci_hcd [ 37.836516] scsi8 : usb-storage 3-2:1.0 [ 38.064112] usb 4-1: new low-speed USB device number 2 using uhci_hcd [ 38.249699] Got empty serial number. Generate serial number from product. [ 38.268250] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input0 [ 38.268427] generic-usb 0003:0603:00F2.0001: input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.2-1/input0 [ 38.304052] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input1 [ 38.304103] Get empty minor:104 [ 38.306241] generic-usb 0003:0603:00F2.0002: input,hiddev0: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.2-1/input1 [ 38.843084] scsi 8:0:0:0: Direct-Access USB2.0 CARD-READER 1.01 PQ: 0 ANSI: 2 [ 38.845207] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 38.849126] sd 8:0:0:0: [sdi] 1939456 512-byte logical blocks: (993 MB/947 MiB) [ 38.852139] sd 8:0:0:0: [sdi] Write Protect is off [ 38.852250] sd 8:0:0:0: [sdi] Mode Sense: 0b 00 00 08 [ 38.855103] sd 8:0:0:0: [sdi] No Caching mode page present [ 38.855212] sd 8:0:0:0: [sdi] Assuming drive cache: write through [ 38.871086] sd 8:0:0:0: [sdi] No Caching mode page present [ 38.871194] sd 8:0:0:0: [sdi] Assuming drive cache: write through [ 38.877054] sdi: sdi1 sdi2 [ 38.891066] sd 8:0:0:0: [sdi] No Caching mode page present [ 38.891178] sd 8:0:0:0: [sdi] Assuming drive cache: write through [ 38.891302] sd 8:0:0:0: [sdi] Attached SCSI removable disk [ 42.559599] ata5.00: configured for UDMA/100 [ 42.559700] ata5: EH complete [ 42.564697] ata7.00: configured for UDMA/100 [ 42.564803] ata7: EH complete [ 44.533663] loop: module loaded [ 48.128036] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 48.128191] e1000e 0000:01:00.0: eth0: 10/100 speed: disabling TSO [ 48.129883] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 48.270086] md: md0: resync done. [ 48.292217] md: resync of RAID array md1 [ 48.292314] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 48.292446] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 48.292611] md: using 128k window, over a total of 2097088k. [ 48.305739] RAID1 conf printout: [ 48.305745] --- wd:2 rd:12 [ 48.305752] disk 0, wo:0, o:1, dev:sde1 [ 48.305770] disk 1, wo:0, o:1, dev:sdg1 [ 58.700291] eth0: no IPv6 routers present [ 63.386616] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 86.974360] md: md1: resync done. [ 87.015554] RAID1 conf printout: [ 87.015560] --- wd:2 rd:12 [ 87.015566] disk 0, wo:0, o:1, dev:sde2 [ 87.015571] disk 1, wo:0, o:1, dev:sdg2 [ 177.940218] usb 3-2: USB disconnect, device number 2 [ 241.852730] usb 3-2: new full-speed USB device number 3 using uhci_hcd [ 242.039016] scsi9 : usb-storage 3-2:1.0 [ 243.045599] scsi 9:0:0:0: Direct-Access USB2.0 CARD-READER 1.01 PQ: 0 ANSI: 2 [ 243.047169] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 243.053494] sd 9:0:0:0: [sdj] 1939456 512-byte logical blocks: (993 MB/947 MiB) [ 243.056638] sd 9:0:0:0: [sdj] Write Protect is off [ 243.056746] sd 9:0:0:0: [sdj] Mode Sense: 0b 00 00 08 [ 243.059610] sd 9:0:0:0: [sdj] No Caching mode page present [ 243.059727] sd 9:0:0:0: [sdj] Assuming drive cache: write through [ 243.075574] sd 9:0:0:0: [sdj] No Caching mode page present [ 243.075679] sd 9:0:0:0: [sdj] Assuming drive cache: write through [ 243.081552] sdj: sdj1 sdj2 [ 243.094575] sd 9:0:0:0: [sdj] No Caching mode page present [ 243.094679] sd 9:0:0:0: [sdj] Assuming drive cache: write through [ 243.094777] sd 9:0:0:0: [sdj] Attached SCSI removable disk [ 245.309319] ata5.00: configured for UDMA/100 [ 245.309421] ata5: EH complete [ 245.314145] ata7.00: configured for UDMA/100 [ 245.314281] ata7: EH complete [ 283.489406] md: bind [ 283.490135] md/raid1:md2: active with 1 out of 1 mirrors [ 283.490271] md2: detected capacity change from 0 to 1995563270144 [ 283.577526] md2: unknown partition table [ 854.694313] EXT4-fs (md2): barriers disabled [ 854.772855] EXT4-fs (md2): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc [ 854.869476] EXT4-fs (md2): re-mounted. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl [ 854.892124] EXT4-fs (md2): re-mounted. Opts: (null) [ 854.900556] EXT4-fs (md2): re-mounted. Opts: (null) [ 1199.430056] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1199.466530] svc: failed to register lockdv1 RPC service (errno 97). [ 1199.466645] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 1199.466801] NFSD: starting 90-second grace period [ 1266.700407] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
-
XPEnology DS3612xs DSM 4.1 build 2668++ (more hardware)
obee replied to Andy928's topic in DSM 5.2 and earlier (Legacy)
Hi Andy, Thanks for your great work with this! It almost working perfectly on my Atom ITX - Intel DN2800MT: http://www.intel.com/content/www/us/en/ ... 800mt.html Only the USB ports not recognized. I have read your wiki tutorial on building kernel: http://xpenology.com/wiki/en/building_xpenology However, I don't not fully understand the steps involved... Is it possible for me to build the USB module and put to the USB boot key? Also, what if I wanna add an additional PCI-E USB 3.0 card? Is there any driver already built with the existing XPEnology DS3612xs DSM4.1 build 2668+ so that I don't need to do the kernel building things? Thanks again for your effort! -
Synology DS3612xs - DSM 4.2 build 3202
obee replied to odie82544's topic in DSM 5.2 and earlier (Legacy)
Hi there, This is my first post here, greeting to everyone. I found some problem when loading the DSM4.1 on my Atom ITX broad and I'd like to see if anyone could help: 1. The link above seems not working (DSM4.2) 2. For my case, I am using DSM4.1, the USB is not working. I am using Intel DN-2800MT. Luckily the SATA, Network are working fine http://www.intel.com/content/www/us/en/ ... 800mt.html 3. Is it possible to add a USB3 card on the PCI-e slot? What USB3 chip is confirmed support? -PLX8111 + NEC D720101? -VIA VL800? -Etrontech ej188H? Thanks in advance!