obee

You have it defined in "Synology Assistant"

Thanks a lot! It (ver4.2) works smoothly, even with the USB 2.0 driver for my motherbroad.

make it anew The link in page 1 is not working, do you have any alternative? thanks

My Atom MB also no show in "Resource Montitor", below is my dmesg: [ 20.551893] synobios: load, major number 201 [ 20.552013] Brand: Synology [ 20.552201] Model: DS-3612xs [ 20.552346] set group disks wakeup number to 4, spinup time deno 7 [ 20.561976] synobios: unload [ 25.973720] synoacl module [synoacl_ext4] is not loaded [ 25.973819] synoacl module [synoacl_vfs] is not loaded [ 25.990609] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0) [ 26.018709] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 26.018900] VFS: Mounted root (ext4 filesystem) readonly on device 9:0. [ 26.019016] Trying to move old root to /initrd ... okay [ 26.031137] Freeing unused kernel memory: 468k freed [ 26.031424] Write protecting the kernel read-only data: 8192k [ 26.036118] Freeing unused kernel memory: 728k freed [ 26.039233] Freeing unused kernel memory: 384k freed [ 26.220193] EXT4-fs (md0): re-mounted. Opts: (null) [ 27.457162] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across: 2097084k [ 27.513132] NET: Registered protocol family 10 [ 27.565855] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 27.566288] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 27.578262] usbcore: registered new interface driver usbfs [ 27.579299] usbcore: registered new interface driver hub [ 27.581435] usbcore: registered new device driver usb [ 27.687523] acpi_cpufreq: Unknown symbol cpufreq_get_measured_perf (err 0) [ 27.719370] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel) [ 27.730473] dca service started, version 1.12.1 [ 27.738737] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.6.7-k [ 27.738884] ixgbe: Copyright (c) 1999-2011 Intel Corporation. [ 27.757904] crypto: exports duplicate symbol __crypto_alloc_tfm (owned by kernel) [ 27.771438] crypto_algapi: exports duplicate symbol __crypto_dequeue_request (owned by kernel) [ 27.780004] crypto_wq: exports duplicate symbol kcrypto_wq (owned by kernel) [ 27.794339] crypto_blkcipher: exports duplicate symbol __ablkcipher_walk_complete (owned by kernel) [ 27.803344] crypto_hash: exports duplicate symbol ahash_attr_alg (owned by kernel) [ 27.824938] aead: exports duplicate symbol aead_geniv_alloc (owned by kernel) [ 27.841048] pcompress: exports duplicate symbol crypto_alloc_pcomp (owned by kernel) [ 27.851042] cryptomgr: exports duplicate symbol alg_test (owned by kernel) [ 27.882121] aes_generic: exports duplicate symbol crypto_aes_expand_key (owned by kernel) [ 27.892957] rng: exports duplicate symbol crypto_default_rng (owned by kernel) [ 27.946325] aes_x86_64: exports duplicate symbol crypto_aes_decrypt_x86 (owned by kernel) [ 27.963988] sha1_generic: exports duplicate symbol crypto_sha1_update (owned by kernel) [ 27.993692] cryptd: exports duplicate symbol cryptd_ablkcipher_child (owned by kernel) [ 28.005894] Intel AES-NI instructions are not detected. [ 28.029575] fuse: Unknown symbol do_aggregate_recvfile_flush (err 0) [ 28.051961] libcrc32c: exports duplicate symbol crc32c (owned by kernel) [ 28.065007] zlib_deflate: exports duplicate symbol zlib_deflate (owned by kernel) [ 28.103911] Btrfs loaded [ 28.185882] synobios: load, major number 201 [ 28.185983] Brand: Synology [ 28.186162] Model: DS-3612xs [ 28.186292] set group disks wakeup number to 4, spinup time deno 7 [ 28.597798] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.632013] ata5.00: configured for UDMA/100 [ 36.632116] ata5: EH complete [ 36.636429] ata7.00: configured for UDMA/100 [ 36.636547] ata7: EH complete [ 36.755752] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 36.755963] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 36.756173] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 36.756182] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 36.756333] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 36.756551] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 36.756672] ehci_hcd 0000:00:1d.7: debug port 1 [ 36.760649] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 36.760687] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0700400 [ 36.770415] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 36.771171] hub 1-0:1.0: USB hub found [ 36.771281] hub 1-0:1.0: 8 ports detected [ 36.790334] xhci_hcd: Unknown symbol blk_timeout_factory (err 0) [ 36.807915] uhci_hcd: USB Universal Host Controller Interface driver [ 36.808197] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 36.808321] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 36.808331] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 36.808513] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 36.808713] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0 [ 36.810775] hub 2-0:1.0: USB hub found [ 36.810904] hub 2-0:1.0: 2 ports detected [ 36.812402] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 36.812532] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 36.812541] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 36.812668] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 36.812895] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080 [ 36.815122] hub 3-0:1.0: USB hub found [ 36.815235] hub 3-0:1.0: 2 ports detected [ 36.817468] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 36.817591] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 36.817601] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 36.817733] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 36.817954] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060 [ 36.823923] hub 4-0:1.0: USB hub found [ 36.824043] hub 4-0:1.0: 2 ports detected [ 36.826911] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 36.827038] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 36.827048] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 36.827173] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 36.827425] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040 [ 36.833456] hub 5-0:1.0: USB hub found [ 36.833665] hub 5-0:1.0: 2 ports detected [ 36.894492] Initializing USB Mass Storage driver... [ 36.895704] usbcore: registered new interface driver usb-storage [ 36.895811] USB Mass Storage support registered. [ 36.921789] usbcore: registered new interface driver usblp [ 37.005714] usbcore: registered new interface driver usbhid [ 37.005877] usbhid: USB HID core driver [ 37.288890] usb 1-8: new high-speed USB device number 4 using ehci_hcd [ 37.424172] Got empty serial number. Generate serial number from product. [ 37.425033] hub 1-8:1.0: USB hub found [ 37.425310] hub 1-8:1.0: 4 ports detected [ 37.652525] usb 3-2: new full-speed USB device number 2 using uhci_hcd [ 37.836516] scsi8 : usb-storage 3-2:1.0 [ 38.064112] usb 4-1: new low-speed USB device number 2 using uhci_hcd [ 38.249699] Got empty serial number. Generate serial number from product. [ 38.268250] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input0 [ 38.268427] generic-usb 0003:0603:00F2.0001: input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.2-1/input0 [ 38.304052] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input1 [ 38.304103] Get empty minor:104 [ 38.306241] generic-usb 0003:0603:00F2.0002: input,hiddev0: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.2-1/input1 [ 38.843084] scsi 8:0:0:0: Direct-Access USB2.0 CARD-READER 1.01 PQ: 0 ANSI: 2 [ 38.845207] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 38.849126] sd 8:0:0:0: [sdi] 1939456 512-byte logical blocks: (993 MB/947 MiB) [ 38.852139] sd 8:0:0:0: [sdi] Write Protect is off [ 38.852250] sd 8:0:0:0: [sdi] Mode Sense: 0b 00 00 08 [ 38.855103] sd 8:0:0:0: [sdi] No Caching mode page present [ 38.855212] sd 8:0:0:0: [sdi] Assuming drive cache: write through [ 38.871086] sd 8:0:0:0: [sdi] No Caching mode page present [ 38.871194] sd 8:0:0:0: [sdi] Assuming drive cache: write through [ 38.877054] sdi: sdi1 sdi2 [ 38.891066] sd 8:0:0:0: [sdi] No Caching mode page present [ 38.891178] sd 8:0:0:0: [sdi] Assuming drive cache: write through [ 38.891302] sd 8:0:0:0: [sdi] Attached SCSI removable disk [ 42.559599] ata5.00: configured for UDMA/100 [ 42.559700] ata5: EH complete [ 42.564697] ata7.00: configured for UDMA/100 [ 42.564803] ata7: EH complete [ 44.533663] loop: module loaded [ 48.128036] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 48.128191] e1000e 0000:01:00.0: eth0: 10/100 speed: disabling TSO [ 48.129883] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 48.270086] md: md0: resync done. [ 48.292217] md: resync of RAID array md1 [ 48.292314] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 48.292446] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 48.292611] md: using 128k window, over a total of 2097088k. [ 48.305739] RAID1 conf printout: [ 48.305745] --- wd:2 rd:12 [ 48.305752] disk 0, wo:0, o:1, dev:sde1 [ 48.305770] disk 1, wo:0, o:1, dev:sdg1 [ 58.700291] eth0: no IPv6 routers present [ 63.386616] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 86.974360] md: md1: resync done. [ 87.015554] RAID1 conf printout: [ 87.015560] --- wd:2 rd:12 [ 87.015566] disk 0, wo:0, o:1, dev:sde2 [ 87.015571] disk 1, wo:0, o:1, dev:sdg2 [ 177.940218] usb 3-2: USB disconnect, device number 2 [ 241.852730] usb 3-2: new full-speed USB device number 3 using uhci_hcd [ 242.039016] scsi9 : usb-storage 3-2:1.0 [ 243.045599] scsi 9:0:0:0: Direct-Access USB2.0 CARD-READER 1.01 PQ: 0 ANSI: 2 [ 243.047169] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 243.053494] sd 9:0:0:0: [sdj] 1939456 512-byte logical blocks: (993 MB/947 MiB) [ 243.056638] sd 9:0:0:0: [sdj] Write Protect is off [ 243.056746] sd 9:0:0:0: [sdj] Mode Sense: 0b 00 00 08 [ 243.059610] sd 9:0:0:0: [sdj] No Caching mode page present [ 243.059727] sd 9:0:0:0: [sdj] Assuming drive cache: write through [ 243.075574] sd 9:0:0:0: [sdj] No Caching mode page present [ 243.075679] sd 9:0:0:0: [sdj] Assuming drive cache: write through [ 243.081552] sdj: sdj1 sdj2 [ 243.094575] sd 9:0:0:0: [sdj] No Caching mode page present [ 243.094679] sd 9:0:0:0: [sdj] Assuming drive cache: write through [ 243.094777] sd 9:0:0:0: [sdj] Attached SCSI removable disk [ 245.309319] ata5.00: configured for UDMA/100 [ 245.309421] ata5: EH complete [ 245.314145] ata7.00: configured for UDMA/100 [ 245.314281] ata7: EH complete [ 283.489406] md: bind [ 283.490135] md/raid1:md2: active with 1 out of 1 mirrors [ 283.490271] md2: detected capacity change from 0 to 1995563270144 [ 283.577526] md2: unknown partition table [ 854.694313] EXT4-fs (md2): barriers disabled [ 854.772855] EXT4-fs (md2): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc [ 854.869476] EXT4-fs (md2): re-mounted. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl [ 854.892124] EXT4-fs (md2): re-mounted. Opts: (null) [ 854.900556] EXT4-fs (md2): re-mounted. Opts: (null) [ 1199.430056] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1199.466530] svc: failed to register lockdv1 RPC service (errno 97). [ 1199.466645] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 1199.466801] NFSD: starting 90-second grace period [ 1266.700407] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3

Hi Andy, Thanks for your great work with this! It almost working perfectly on my Atom ITX - Intel DN2800MT: http://www.intel.com/content/www/us/en/ ... 800mt.html Only the USB ports not recognized. I have read your wiki tutorial on building kernel: http://xpenology.com/wiki/en/building_xpenology However, I don't not fully understand the steps involved... Is it possible for me to build the USB module and put to the USB boot key? Also, what if I wanna add an additional PCI-E USB 3.0 card? Is there any driver already built with the existing XPEnology DS3612xs DSM4.1 build 2668+ so that I don't need to do the kernel building things? Thanks again for your effort!

Hi there, This is my first post here, greeting to everyone. I found some problem when loading the DSM4.1 on my Atom ITX broad and I'd like to see if anyone could help: 1. The link above seems not working (DSM4.2) 2. For my case, I am using DSM4.1, the USB is not working. I am using Intel DN-2800MT. Luckily the SATA, Network are working fine http://www.intel.com/content/www/us/en/ ... 800mt.html 3. Is it possible to add a USB3 card on the PCI-e slot? What USB3 chip is confirmed support? -PLX8111 + NEC D720101? -VIA VL800? -Etrontech ej188H? Thanks in advance!