Previous post on reddit showed a tutorial for adding nvme as storage pool:
https://www.reddit.com/r/synology/comments/a7o44l/guide_use_nvme_ssd_as_storage_volume_instead_of/
Many people succeeded based on the comments. But I'm running into a weird issue:
root@Andy_NAS_84TB:~# synopartition --part /dev/nvme0n1 12
Device Sectors (Version8: SupportRaid)
/dev/nvme0n11 4980480 (2431 MB)
/dev/nvme0n12 4194304 (2048 MB)
Reserved size: 260352 ( 127 MB)
Primary data partition will be created.
WARNING: This action will erase all data on '/dev/nvme0n1' and repart it, are you sure to continue? [y/N] y
Cleaning all partitions...
Creating sys partitions...
[/sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/nvme0n1] failed. err=255
Create system partitions failed.
root@Andy_NAS_84TB:~# /sbin/sfdisk -N1 -uS -q -f -j2048 -z4980480 -tfd -F /dev/nvme0n1
[/dev/nvme0n1] is a partition
root@Andy_NAS_84TB:~# fdisk -l /dev/nvme0n1
Disk /dev/nvme0n1: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
I've tried
synopartition --part /dev/nvme0n1 [1-12]
sfdisk -N[1-5] -uS -q -f -j2048 -z4980480 -tfd -F /dev/nvme0n1
The other nvme /dev/nvme1n1 is also tested. Same issue.
Any suggestions?
These are WD blue disks. Motherboard is Asrock X570M pro running ryzen 3400G
DSM 6.2.2-24992 update 4
version DS3617xs
After looking at logs again, I decided to uninstall surveillance station, and advanced codecs. I then only reinstalled surveillance station, added one camera and one task, and it now works.
По переходник вам сказали. По блоку питания берите Блок питания be quiet! Pure Power 11. Полно размерный. Тихий. Фирма. Нагрузки под оптимум бронзы/золота итд вы все равно не обеспечит. Только учтите, что сейчас на таких блоках мало сата, посчитайте, китайский переходник сата 1 к 5 закажите заранее. С бережёт нервы, чем молекс сата пихать