Leaderboard

Обнаружил и испытал beta пакет Teamviewer, может кому пригодится для входа в DSM из-за NAT. P.S. Для того, чтобы подключиться нужно создать учетку TV и привязать к ней DSM. P.P.S. Если включить терминальный режим, то можно войти в консоль...

Bonjour, je me suis juste inscrit pour dire un énorme merci à Jun, Polanskiman et tous ceux qui ont bossé sur le projet XPEnology. Ces deux dernières semaines j'ai pu passer d'un DSM 5.0 à 6.1.7 presque sans aucun soucis sur une Asrock C2550 (neuve, l'ancienne ayant lâché après un peu plus de 4 ans de bons et loyaux services, ce qui est assez long pour ce modèle apparemment...) grace à votre boulot génial et la communauté qui m'a permis de contourner les problèmes commun à ce matos. Bravo et encore merci à vous tous pour rendre cela possible !

Hi, if you don't mind to loose your configuration, but keep all data, then on my 2 disk RAID1 config (J3455B) this worked: create the syno pendrive from scratch (it's corrupted during upgrade) create an ubuntu live pendrive boot up linux and open terminal sudo -i apt-get install mdadm lvm2 mdadm -Asf && vgchange -ay fdisk -l | grep /dev/sd mdadm -AU byteorder /dev/md0 /dev/sda1 /dev/sdb1 (and list all your first partitions of the disks) mkfs.ext4 /dev/md0 now all your 1st partitions are formatted, reboot removing ubuntu pendrive and inserting syno pen choose reinstall use manual install and select last working PAT wait....., and you'll be DONE (of course all apps and configs are lost, but data should be there) hope it helps.

Check this out google Recovering a raid array in “[E]” state on a Synology nas - Midnight Light helped me out

- Outcome of the update: FAILED (if no monitor connected) - DSM version prior to update: DSM 6.2.1-23824U6 - Loader version and model: Jun v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock J4105-ITX - Additional comments: I should say the 6.2.2 is working only if my VGA monitor is connected (regardless if it's power on/off). No HW transcoding available in 6.2.2 in this case. If moditor is disconnected, DSM won't start.

- Outcome of the update: SUCCESSFUL - DSM version prior to update: DSM 6.2.1-23824U6 - Loader version and model: Jun v1.04b - DS918 - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock J4105-ITX with Intel 82576 PCIe Network Card - Additional comments: i915 driver seems missing and Hardware transcoding is Invalid 。This path no longer exists ：/dev/dri