Jump to content
XPEnology Community

kanshudj

Rookie
  • Posts

    4
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

kanshudj's Achievements

Newbie

Newbie (1/7)

3

Reputation

  1. I have two physical machines, one is G4400 and the other is I3 7100t. Both models are 918 +, and the boot programs are the same. The hardware decoding, transcoding and face recognition of G4400 are normal, but 7100t are not normal (PS: ls / dev / dri can find ' renderd128'). After exchanging two CPUs, the situation is reversed. Is it related to GPU? The device ID of g4400 GPU is 0x1902, and the device ID of I3 7100t GPU is 0x5912 The following is the error message of i915 when 7100t is started:
  2. - Outcome of the update: SUCCESSFUL - DSM version prior to update: DSM 6.2.1-23824U6 - Loader version and model: Jun v1.04b - DS918 - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock J4105-ITX with Intel 82576 PCIe Network Card - Additional comments: i915 driver seems missing and Hardware transcoding is Invalid 。This path no longer exists :/dev/dri
  3. kanshudj

    DSM 6.2 Loader

    hello, Asrock J3455 (UEFI+1.04b+Intel 82576 )is OK,speed of both upload and download is normal (100MB/S).when using onboard NIC with leagcy BIOS,the upload speed is abnormal and unstable. DSM can not be found when using onboard NIC with UEFI BIOS in 1.04b after installation of system. Issue: when shutdown the system,the power is still on; the system failed to restart successfully.
  4. kanshudj

    DSM 6.2 Loader

    My hardware is j3455-itx, and dsm6.2 (ds918+) was successfully installed with 1.03a2 bootloder. During the process, I also encountered the problem that when i restarted the host after installation, the host is missed. I am preparing to test all functions today. Note: 1. legacy bios with USB bootloader and put in the first place, the hard disk uses ahci mode. 2. After the installation restarts, check if the bios boot is restored to uefi. This is my case but I don't know why. Then be patient and wait ,when the system startup, it may be very slow. when I didn't see any information on the screen and I saw a black screen, I found the ip ip.
×
×
  • Create New...