uhdamm Posted March 8, 2017 Share #1 Posted March 8, 2017 (edited) After an unsuccessful baremetal upgrade from 6.0.2 to 6.1, I decided to make a clean install: - Deleted and recreated RAID5 (4x1TB) array. - Followed the general install guide including: - Mounted system.img from JUN and set VID and PID (didn't touch serial or MAC adress) in grub.cfg - Created new USB No matter with boot option i choose (including "Force install"), both Synology Assistant and find.synology.com only have one option, and that is to recover: Something about registering that my disks have been moved to another DS3615xs, hence recovering my data is the only option. This same baremetal has been working fine since XPE version 4-something and up until 6.0.2. There has been no change to the HW or the BIOS. How do I get to the point where I can install the pat-file? Appreciate any help I can get Edited March 9, 2017 by Guest Quote Link to comment Share on other sites More sharing options...
uhdamm Posted March 8, 2017 Author Share #2 Posted March 8, 2017 Anyone? Quote Link to comment Share on other sites More sharing options...
billat29 Posted March 9, 2017 Share #3 Posted March 9, 2017 What hardware are you running? and what version of the bootloader are you using. I'm a bit worried about "system.img" Quote Link to comment Share on other sites More sharing options...
uhdamm Posted March 9, 2017 Author Share #4 Posted March 9, 2017 Dell Precision T3500 and 6.0.2 from JUN. Meanwhile I tried several things including deleting the USB-key partitions and many other things, but to no avail. I then tried 6.1 - 1.02 from JUN and lo and behold - suddenly the INSTALL option became available in find.synology.com. Did the install - got a disk (RAID) error - rebuilt the RAID - installed Hyperbackup and did a complete (DISK) restore from my D211, and I'm now a very happy man Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted March 14, 2017 Share #5 Posted March 14, 2017 The message that says that your disks have been moved from another DS3615xs machine is totally normal. If you continue you will then have the possibility to migrate your installation. Things to remember: Use the real MAC address of your NIC. Reboot your router before doing the install and make sure the MAC address/IP is not fixed in the router. Quote Link to comment Share on other sites More sharing options...
uhdamm Posted March 14, 2017 Author Share #6 Posted March 14, 2017 That was exactly my problem - migration was the only option, however I wanted to do a clean install. Don't know how I eventually got around to get to the "install" option, as I didn't change anything - serial, MAC etc. Anyway, It's working now, so thanks for your input. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.