milosv Posted July 31, 2023 Share #1 Posted July 31, 2023 (edited) Hi all, I've used the same approach to install DSM 7.2 last week on another NAS, so i know the proces should work. With this install, I get this indistinguishable text. I tried a different USB and re-flashed the image....any idea? It can't be hardware as boot sequence seems to have normal text. Is it the flashing process? I used Etcher to flash the image so there are no steps I can screw up...I think latest image from github for arpl-i18n video of the boot from USB: Edited July 31, 2023 by milosv Quote Link to comment Share on other sites More sharing options...
milosv Posted July 31, 2023 Author Share #2 Posted July 31, 2023 (edited) Update: RESOLVED To help out others with similar issues: I read a lot of people mention grub settings with issues such as this. however none resolutions worked. I read one issue where it was resolved with a BIOS update, that is what I did and it resolved itself. text appears normal. In case if it was a combination of GRUB config change and BIOS updates here are the changes I did to USB boot as well: Edit GRUB.cfg file in notepad or similar, find "GRUB_GFXMODE=AUTO" and change "AUTO to "800x600" Do not use any ultrawide resolution as GRUB does not contain such fancy resolutions. the one i used worked fine on my ultrawide monitor. Edited July 31, 2023 by milosv 1 Quote Link to comment Share on other sites More sharing options...
Orphée Posted July 31, 2023 Share #3 Posted July 31, 2023 @milosv did you create an issue on ARPL-i18n github repo ? I'm sure @wjz304 would look at it. 1 Quote Link to comment Share on other sites More sharing options...
milosv Posted August 1, 2023 Author Share #4 Posted August 1, 2023 Will do, good suggestion. Does anyone know how we can load additional drivers in the ARPL? I know this list exists: https://github.com/pocopico/rp-ext but how and where do i copy these to make it work? newbie with this stuff, any help is appreciated. Quote Link to comment Share on other sites More sharing options...
wjz304 Posted August 1, 2023 Share #5 Posted August 1, 2023 1 Quote Link to comment Share on other sites More sharing options...
milosv Posted August 1, 2023 Author Share #6 Posted August 1, 2023 Thanks wjz304, i noticed the modules were already selected in the module meu, yet I still couldn't see my 2.5Gb LAN card (realtek 8125). do i still need to use external module and download that driver from the github? Quote Link to comment Share on other sites More sharing options...
wjz304 Posted August 1, 2023 Share #7 Posted August 1, 2023 https://github.com/wjz304/arpl-i18n/wiki/关于-"启动"-后无法找到DSM My English is also very poor, I don't know if you can understand this after translation 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.