hello I have installed DS1621 + on a pendrive via my.sh script
after several help from Peter everything seems to work, as well as all 5 network cards, configured in lacp. The only problem is the VMM which does not start the virtual machines for me.
as I was interested in learning more about whether the system actually loaded the drivers correctly, peter suggested that I follow the command from TCRP
ls -l * load / c * / e *
but it didn't give me results, how can I generate the log of my.sh?
My hardware
Desktop pc fujitsu
M/B; eprimo e520 16 Gb ddr ram
cpu intel I5.4590
2 ssd 512Mb
1 disk 4 Tb
NIC: Intel(R) Ethernet Connection I217-V and PCI 4X Intel I-350
Question
wifi75
hello I have installed DS1621 + on a pendrive via my.sh script
after several help from Peter everything seems to work, as well as all 5 network cards, configured in lacp. The only problem is the VMM which does not start the virtual machines for me.
as I was interested in learning more about whether the system actually loaded the drivers correctly, peter suggested that I follow the command from TCRP
ls -l * load / c * / e *
but it didn't give me results, how can I generate the log of my.sh?
My hardware
Desktop pc fujitsu
M/B; eprimo e520 16 Gb ddr ram
cpu intel I5.4590
2 ssd 512Mb
1 disk 4 Tb
NIC: Intel(R) Ethernet Connection I217-V and PCI 4X Intel I-350
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.