Cant shut down after a successful install

[Ruben]

Hardware:

Lenovo ThinkCentre M71e 

Core i3 2120

8 GB RAM

SATA Ports 4 (1 dead port) 3 working fine

 

Using Pocopico's loader, I have managed to install DSM 7.1-42661 + Update 1 .. DS3615xs. The process was smooth but i'm not able to use the power off function while a reboot works fine. I have tried doing a shut down using root commands too but failed

 

plz help 

[rojoone2]

Have you added this extension  before your build command?

./rploader.sh ext bromolow-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json

[Ruben]

No i have not. Il give it a try thanks

[apriliars3]

I have Lenovo ThinkCentre M71e with Intel i3 2120 and can poweroff with GUI and DSM off but pc will continue on.

 

I use this command and install redpill-acpid but no works

 

./rploader.sh ext bromolow-7.1.0-42661 add auto

[Ruben]

7 hours ago, rojoone2 said:

Have you added this extension  before your build command?

./rploader.sh ext bromolow-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json

./rploader.sh update

./rploader.sh fullupgrade

./rploader.sh identifyusb

./rploader.sh serialgen DS3615xs realmac

./rploader.sh ext bromolow-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json

./rploader.sh build bromolow-7.1.0-42661

 exitcheck.sh reboot

 

these are the commands i used but still no luck  

 

[rojoone2]

Can you try DS3622xs+? It works with most hardware. 

 

./rploader.sh clean now

/rploader.sh update

./rploader.sh fullupgrade

./rploader.sh identifyusb

./rploader.sh serialgen DS3622xs+ realmac

./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json

./rploader.sh build broadwellnk-7.1.0-42661

 exitcheck.sh reboot

[Ruben]

8 minutes ago, rojoone2 said:

Can you try DS3622xs+? It works with most hardware. 

 

./rploader.sh clean now

/rploader.sh update

./rploader.sh fullupgrade

./rploader.sh identifyusb

./rploader.sh serialgen DS3622xs+ realmac

./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json

./rploader.sh build broadwellnk-7.1.0-42661

 exitcheck.sh reboot

Installed perfectly but the problem still exist.

[Ruben]

18 minutes ago, rojoone2 said:

Can you try DS3622xs+? It works with most hardware. 

 

./rploader.sh clean now

/rploader.sh update

./rploader.sh fullupgrade

./rploader.sh identifyusb

./rploader.sh serialgen DS3622xs+ realmac

./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json

./rploader.sh build broadwellnk-7.1.0-42661

 exitcheck.sh reboot

Ok i guess i figured it out finally...i tried booting from USB but using legacy option this time and shutdown works! but i need it to boot through legacy option everytime it boots which it doesnt.. is there a fix for that? i dont see an option in the BIOS