Lanchadan Posted June 11, 2022 Share #1 Posted June 11, 2022 Sorry if the subject has been discussed somewhere, I have failed to find it. I have a Lenovo 9087 SFF, and managed to install a DSM 7.1-42661DS3611xs+ on it. However during install I could not find a way to keep all the 6 ports available on the mainboard without attaching a hard drive to it, regardless of the various settings I have tried in the BIOS. So I have specified in the satamap only 1 fof the only 1 HDD I have at that time in the machine. However I have 2 drives, and now I would like to add the second one as well to the NAS for raid 1. (The reason not doing it earlier these 2 drives were in pair in another NAS, and I had to copy the content first between the 2 NAS and then use both in the new NAS.) Long story short, is it possible to change the port numbers deep down in the sata port mapping from 1 to 2 in an installed NAS, or I neew to start again from scratch, and use the tinycore to build the NAS again, and lose all settings, etc.? Thank you for your kind help in advance! Quote Link to comment Share on other sites More sharing options...
flyride Posted June 11, 2022 Share #2 Posted June 11, 2022 You can rebuild the loader with TinyCore without reinstalling DSM. https://xpenology.com/forum/topic/63135-cant-see-all-disks-on-dsm-7x/ Quote Link to comment Share on other sites More sharing options...
Lanchadan Posted June 11, 2022 Author Share #3 Posted June 11, 2022 Thank you very much for the prompt help, trying it out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.