Jump to content
XPEnology Community

DSM does not see hdd on SATA card


DraGula
 Share

Recommended Posts

Hello here!

 

I need your help :smile:

I added a Transcend PDC3 card on my Proliant running on DSM 4.2. The goal was to add a sixth disk and of course enjoyed the USB3.

Problem, my disc is not recognized by DSM.

 

My drive is recognized in the BIOS (in priority disks). It even detects the disk model.

The USB works on DSM.

A "dmesg | grep-i SATA" correctly list six discs. But nothing to do, my last disk does not appear in the Disk Management.

 

Do you have any idea?

Thank you!

Link to comment
Share on other sites

FYI here is the dmesg :

 

dmesg | grep -i SATA
[    1.922868] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f im                                                                   pl SATA mode
[    1.926214] ata1: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3ffd00 irq                                                                    45
[    1.926288] ata2: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3ffd80 irq                                                                    45
[    1.926361] ata3: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3ffe00 irq                                                                    45
[    1.926433] ata4: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3ffe80 irq                                                                    45
[    1.926505] ata5: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3fff00 irq                                                                    45
[    1.926577] ata6: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3fff80 irq                                                                    45
[   12.388116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   22.869110] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   33.356101] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   43.843108] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   44.161102] ata5: SATA link down (SStatus 0 SControl 300)
[   44.621109] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   44.638566] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 imp                                                                   l SATA mode
[   44.639691] ata7: SATA max UDMA/133 abar m512@0xfe7ffc00 port 0xfe7ffd00 irq                                                                    46
[   44.639765] ata8: SATA max UDMA/133 abar m512@0xfe7ffc00 port 0xfe7ffd80 irq                                                                    46
[   45.099105] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   45.418117] ata8: SATA link down (SStatus 0 SControl 300)

Link to comment
Share on other sites

  • 4 weeks later...
Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...