Vodka2014 7 Posted January 12 Share Posted January 12 Good Day I want to be 100% sure on this before I make a big mess So my current setup is a 3615xs and now I need to move to an 918+. The new hardware for 918+ is ready and I have done a new USB etc... So what I want to know is do I move the Disks and then power on so it can do a new Setup from the ground up and Select Migrate. OR Do i setup my 918+ and the move the disks over. I need to keep the same Name, IP, Settings etc... Thanks in Advanced. Quote Link to post Share on other sites
billat29 26 Posted January 12 Share Posted January 12 1. Check that the new box will boot (without disks) and can be found on your LAN. I would have given the USB a new serial number but I am not sure whether that is required. 2. Back up settings from Control Panel. You do have a backup of your critical data, right? 3. Then apply method 1. It will say that you have moved your disks into a new diskstation and give you the option to migrate. 4. Migrate and then check where you are. If the IP address is set by your router, it will probably have changed (step 1 will confirm). Then either access the correct page on your router to set the desired IP address or do it in DSM Control Panel. Good Luck! 1 Quote Link to post Share on other sites
Vodka2014 7 Posted January 12 Author Share Posted January 12 6 minutes ago, billat29 said: 1. Check that the new box will boot (without disks) and can be found on your LAN. I would have given the USB a new serial number but I am not sure whether that is required. 2. Back up settings from Control Panel. You do have a backup of your critical data, right? 3. Then apply method 1. It will say that you have moved your disks into a new diskstation and give you the option to migrate. 4. Migrate and then check where you are. If the IP address is set by your router, it will probably have changed (step 1 will confirm). Then either access the correct page on your router to set the desired IP address or do it in DSM Control Panel. Good Luck! Thanks Quote Link to post Share on other sites
Vodka2014 7 Posted January 13 Author Share Posted January 13 Hi @billat29 The migration worked 100%. Thanks again. Quote Link to post Share on other sites
billat29 26 Posted January 13 Share Posted January 13 You're welcome Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.