igorek24 Posted November 1, 2014 #1 Posted November 1, 2014 Hi all, I'm building new XPEnology NAS and came across this problem, 4 slots are shown empty. I have 4 on-board SATA ports and Dell H310 ( flashed with IT firmware) with 8 ports. I have 2 SSDs plugged in to 2 On board ports and 8 HDDs in to H310 and only 2 SSDs with 6 HDDs are showing up in gui. I tried one of my older motherboard and all of them showed up. How can I disable this 4 empty slots? I did add "rmmod=ata_piix" to my syslinux.cf that removed additional 2 empty slots ( Ihad total of 6). My MANU LABLE: kernel /zImage rmmod=ata_piix ihd_num=0 netif_num=4 syno_hw_version=DS3612xs sn=B3J4N01003 vid=0x0EA0 pid=0x2168 loglevel=7 vga=0x305 debug console=ttyS1,115200 My Motherboard: BIOSTAR Hi-Fi H81S2
stanza Posted December 6, 2014 #2 Posted December 6, 2014 edit /etc.defaults/synoinfo.conf and /etc/synoinfo.conf change the section # service limitations maxaccounts="16000" maxgroups="512" maxshares="512" maxdisks="16" <<<<<<<<<<<<<<<<<<< maxprinters="2" maxlogsize="64" maxvhost="30" save both files, go back to storage manager and wait a minute or two... it should then automagically change. If it does't refresh (which it doesn't seem to do on stupid internet explorer) try a different browser. . .
Recommended Posts