-
Posts
583 -
Joined
-
Last visited
-
Days Won
7
Posts posted by Trantor
-
-
Hi,
Would it be possible to add driver support for HP Proliant software controllers (like the B120i one)? Basically the hpvsa driver.
Thanks!
Like the rest of the "B" series Smart Array controllers, this device is a software based RAID controller. A driver enables the RAID function.
The driver is called hpvsa.
This driver is close source by HP and it's only available for Red Hat (CentOS) and SUSE, so we can't add it to XPEnoboot.
If you disble the RAID function in systems ROM of your Smart Array, the systems treats the controller as a standard disk controller so you can use either SATA or SAS drives and DSM "should" detects your drives.
It does not work to operate Smart Array E200 controller, what to see?This controller is supported by cciss driver BUT:
The cciss driver is a block driver, while the hpsa driver is a SCSI driver.
This means that logical drives which would be presented with devices nodes like "/dev/cciss/c0d0" with cciss driver and "/dev/sdX" with hpsa.
Unfortunately I think DSM only detect drive with /dev/sdX style.
You can test to disable RAID in your E200 controller and maybe like above the systems will treats the controller as a standard disk controller.
-
Yes to both.
I can use it without any problem but when they want ... a disk or a pair become offline. just unplug and plug again and go online again but the raid could be degraded or just faulty
Did you "build" your raid with the onboard software or did you let DSM do it for you ?
Did you try to change SATA mode in AHCI, IDE or RAID ?
-
Hi, i think that this is asked before but ... i think that there are some problems with the drivers of the Asus P9A-I motherboard.
I'm having a lot of issues with the Marvell 88SE9485 SAS controller. I can't make a stable raid.
Right now all the drives are new and works fine with other systems.
Right now i'm runing 5.2-5967.1 and the mvsas module loads fine, i don't know what can be faulty
Did you see your disks during setup ?
Did you manage to install DSM on it ?
Give more details please
-
XPEnoboot 5.2-5967.1 is available !
Check viewtopic.php?f=2&t=5026
-
Your system should boot even without driver for storage and network.
When booting edit boot command line in grub and remove loglevel=0.
This will show lot of informations during boot and maybe display more than booting zImage.
-
Sorry for the stupid question, but if its a driverless hardware device than it should work right?
thanks
I don't think you can use this interface like normal lan interface because it is dedicated for IPMI use.
On the other hand the X10SDV-4C-TLN2F have two onboard intel 10gb interfaces wich are supported by the ixgbe driver
-
Hi,
I would just like to ask if the drivers for
1 Realtek RTL8201N PHY (dedicated IPMI) and supported. If not, will they be in the near future.
Its for the supermicro xeon d MB.
Thanks
From realtek website:
Q9: Why don't I find RTL8201x driver on the website? A9: RTL8201, RTL8201BL, RTL8201CL, RTL8201CP, RTL8201N and RTL8211B(L) are all PHYceiver. That is a driverless hardware device. Software driver are relative to Network controller ( MAC ) which is integrated into chipset in such case mostly. Please contact your mother board maker or chipset manufacturer to obtain proper driver support.
I would love to see Prolific and FTDI USB Serial drivers includedI will check for this.
Dear Trantor,is there a place to download and test dev builds?
Thanks a lot
No place to dowload dev builds but maybe in the future.
What's going on with the new version now? The summer is here and those fan/temp sensors would be more than useful.It will be available when the development team will have more free time...
-
I am sorry, I thought that was what I was doing!
I looked into this list before posting...
http://xpenology.me/compatible/
...and Realtek RTL8111GR is not included.
Sorry that the CPU question drifted off - but since the J3160 is a very new CPU stepping isn't it logical to assume that throttling does not work due to a lack of drivers?
Intel P-State will support this CPU.
Realtek RTL8111GR is recent too. I will look to update r8168 to the latest version.
EDIT:
Others have issues with this network adapter : http://forums.openmediavault.org/index. ... -any-luck/
-
Is there a possibility that the HP Smart Array P400 can be made to work?
It's plan for next release which will be release very soon as we are in the latest stage of tests.
Changelog:
DSM
[OK] Add 5.2.5967 support
[OK] Fix Control Panel > Hardware & Power issue in 5967
[OK] Fix bios reset issue on some system (this may break the power on/off schedule function)
Storage
[OK] Add cciss for HP driver Smart Array E200 Controller
[OK] Updated hpsa module for HP H240 12Gb 2-ports Int Smart Host Bus Adapter
[OK] Add pata_amd, pata_jmicron
Network
[OK] Updated ixgbe driver for X550 10G Network
Misc
[OK] intel_pstate
[OK] sr_mod and cdrom.ko modules for external usb cd/dvd devices
Sensors
[OK] Winbond w83627ehf
[OK] Winbond W83795ADG
[OK] Fintek F71808A
[OK] Nuvoton nct6775
DVB
[OK] Fix DVB dongle detection since 5644 build
Time Backup
[OK] Fix system freeze by building dm-snapshot module
-
And if poweroff is not working you can use crontab to run poweroff command
-
Hello,
I have XPEnoboot 5.2-5644.5
installed with DSM 5.2-5644 update 5
will this Controller work (if it is flashed with IT-Mode)
https://www.amazon.de/LSI-9212-4i-4-Por ... B004OCQZPY
LSI SAS9212-4i SAS Controller
i can't find resources which LSI SAS Controller will work which not ?
regards Hendrik
Check my signature
-
We edit the kernel sources instead of patching the synobios.ko file.
But the result is the same : It solve the BIOS reset issue but it breaks the power on/off schedule.
-
This fix seems to works for everyone so it should be included in next release
Big thanks to the XPEnology community
-
sis 191 gigwbit network driver for my old hp ex490.
thx a lot
Please, please check viewtopic.php?f=2&t=10973 BEFORE asking
-
I'm little late but I think your monitor doesn't support vga=0x305 (1024x768 8bits).
During GRUB screen press TAB to edit boot command line and remove vga=0x305.
It will revert the resolution to 640x480
-
Known issues with the current boot loader.
I reverted to the 5592.2 bootloader without changing DSM and it worked. I removed time backup after boot and went back to the most current image.
@doggy101 : Do what bglf83 said.
The TimeBackup issue is fixed in the dev version which will be release soon.
-
According http://cciss.sourceforge.net/
The intent with newer kernels (2.6.36-ish) is to remove this overlap so the sets of controllers supported by hpsa and cciss are disjoint.So I think cciss in our kernel (v3.10) "only" have this support:
Smart Array 5300 Smart Array 5312 Smart Array 532 Smart Array 5i Smart Array 6400 Smart Array 6400 EM Smart Array 641 Smart Array 642 Smart Array 6422 Smart Array 6i Smart Array E200 Smart Array E200i Smart Array E500 Smart Array P600 Smart Array P400 Smart Array P400i Smart Array P700m Smart Array P800
and hpsa have:
Gen6/7 Controllers Smart Array P212 Smart Array P410 Smart Array P410i Smart Array P411 Smart Array P812 Smart Array P712m Smart Array P711m Gen8 Controllers Smart Array P222 Smart Array P420 Smart Array P420i Smart Array P421 Smart Array P822 Smart Array P220i Smart Array P721 Gen8.5 Controllers Smart Array P430 Smart Array P430i Smart Array P431 Smart Array P830 Smart Array P830i Smart Array P831 Smart Array P731m Smart Array P230i Smart Array P530 Smart Array P531 Gen9 Controllers Smart Array P440 Smart Array P441 Smart Array P840 Smart Array P440ar Smart Array P244br Smart HBA H240 Smart HBA H241 Smart HBA H240ar Smart HBA H244br Storage Appliance Controllers HP StorageWorks 1210m HP Storage P1224 Array Controller HP Storage P1228 Array Controller HP Storage P1228m Array Controller HP Storage P1224e Array Controller HP Storage P1228e Array Controller HP Storage P1228em Array Controller
If your P420i is supported by both you will have to rmmod cciss module at boot to force hpsa driver and have scsi support (/dev/sdX)
-
@Trantor, will new loader be compatibile with lastest 5.2 (power management working again)?
Maybe but not sure because checking protected files takes time.
No idea about power management (I assume you are refering to power off by button ?) I will try it.
No ETA because I'm waiting for an usb wifi dongle to check/fix wifi detection, and hoping to fix it like I did with DVB.
This will be very good if we succeed to build a working version with iscsi, dvb and wifi working
-
This has been discussed with the dev team few weeks ago.
The next release will have the kernel sources available.
-
Small update of dev build:
Storage
[OK] Add cciss for HP driver Smart Array E200 Controller
[OK] Updated hpsa module for HP H240 12Gb 2-ports Int Smart Host Bus Adapter
[OK] Add pata_amd, pata_jmicron
Network
[OK] Updated ixgbe driver for X550 10G Network
Misc
[OK] intel_pstate
[OK] sr_mod and cdrom.ko modules for external usb cd/dvd devices
[KO] PCI Stub driver and IOMMU Hardware Support for VirtualBox ; enabling these break iscsi block support
Sensors
[OK] Winbond w83627ehf
[OK] Winbond W83795ADG
[OK] Fintek F71808A
[OK] Nuvoton nct6775
DVB
[OK] Fix DVB dongle detection since 5644 build
Time Backup
[OK] Fix system freeze by building dm-snapshot module
-
Trantor, just an info please, i use tbs dvb drivers compiled on version 5592 on xpe boot 5592.
Its possible to update to last 5.2 veraion and have dvb working or latest xpe boot doesent havr dvb eabled?
Many users complain about this... I just bought a PCTV nanoStick DVB-T adapter to clear this out.
I set the P420i in to HBA mode as per the third post in the link https://hardforum.com/threads/hp-dl380p-gen8-p420i-controller-hbamode.1852528/
My problem is that the hpsa driver included in the latest version of 5644 works if I configure a single raid 0 disk but then I lose all of the smart info and random disk numbers are assigned. When I set it to HBA mode DSM installation just says no hard disks found. Can you please assist. Also I am unable to login using the ssh/telnet password calculator to even see if the disk is being detected within dsm.
Maybe the current hpsa driver (v2.x) is to old to support HBA properly.
I read on VMware forums that some users have the same issue as you. They update driver and firmware to fix it.
Try to update the firmware, the hpsa driver will be updated to the latest in next build.
Please add support for Realtek® PCIe GBE FamilyDriver link: http://www.realtek.com.tw/downloads/dow ... wn=false#2
Thank you
Please check : viewtopic.php?f=2&t=10973 before asking.
-
Since sources for DSM6 are not available, XPEnology dev team will soon release an update version of DSM 5.2 with updated drivers:
Storage
Add cciss for HP driver Smart Array E200 Controller
Updated hpsa module for HP H240 12Gb 2-ports Int Smart Host Bus Adapter
Updated 3w-9xxxx module for AMCC 3Ware 9690SA-8I SAS SATA PCIe x8 RAID Controller
Network
Updated ixgbe driver for X550 10G Network
Misc
intel_pstate
sr_mod and cdrom.ko modules for external usb cd/dvd devices
PCI Stub driver and IOMMU Hardware Support for VirtualBox
Sensors
Winbond w83627ehf
Winbond W83795ADG
Fintek F71808A
Nuvoton nct6775
-
@medric: Your are in the wrong topic. Your adapter is a brocade, not broadcom ^^
This topic is about bnx2x driver. You need bna for your brocade adapter.
See here to add missing firmware : viewtopic.php?f=2&t=12367
-
Current release lack two firmware for Brocade 10G adapters.
Firmware : https://download.xpenology.fr/drivers/bna-firmware.zip
Put the two .bin files in /lib/firmware/
HP ML380 G5
in Archives
Posted
Sorry but like I said here viewtopic.php?f=2&t=1361&start=890#p68710 cciss driver do not generate standard /dev/sdX nodes.
So unfortunately I don't think that DSM will detect disk with your controller.