rcjroy

For the life of me, I can't seem to get all 8 drives connected to my HBA to show up in dsm. Using Proxmox with PCIe passthrough for my HBA. The only drive I need are the ones attached to the HBA Here's the output of ./rploader.sh satamap now Machine is VIRTUAL Hypervisor=KVM Found SCSI HBAs, We need to install the SCSI modules scsi-5.10.3-tinycore64 is already installed! Succesfully installed SCSI modules Found "00:1f.2 Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02)" Detected 6 ports/0 drives. Mapping KVM q35 bogus controller after maxdisks Found "06:07.0 Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02)" Detected 6 ports/1 drives. Mapping SATABOOT drive after maxdisks Found SCSI/HBA "01:00.0 LSI Logic / Symbios Logic SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05)" (7 drives) Computed settings: SataPortMap=11 DiskIdxMap=0C0C Only the first three drives, in random order, show up in dsm. I've tried.. SataPortMap=11 DiskIdxMap=0C0C SataPortMap=01 DiskIdxMap=1010 SataPortMap=001 DiskIdxMap=000000 SataPortMap=008 DiskIdxMap=000000 I've read that sataportmap defines how many ports on each host is being used. So in this situation, I would, in theory, use SataPortMap=008, since I only need the 8 port from the HBA. Am I getting this right?