mattias93

Pardon my ignorance, but using my.sh or following the guide at the beginning of this post, how do I disable the boot-wait extension? Moreover, in the first log I reported here, while trying with the DS3622xs+ The mounts are without the trailing p: /dev/synoboot1 2048 100351 98304 83 /dev/synoboot2 100352 253951 153600 83 /dev/synoboot3 253952 2097151 1843200 83 and, for a number of times before the install loop, the systems reboots fine. Thanks!!

No, it's a Dell Precision 3630 https://www.dell.com/ko-kr/shop/cty/pdp/spd/precision-3630-workstation#configurations_section Dell produces the motherboard for this device, so it doesn't have a name. It has a Intel Xeon 2124 processor. So far I tried: ds3622xs+ could boot, after some reboots the reinstall loop happens. ds920+ reinstall loop. ds918+ reinstall loop. ds3615xs Could boot, running some test to see if it's stable ds3617xs no network ds1621+ no network dva3221 no network

Hi Peter, here's the result: and There are 3 devices connected via USB: USB Stick, USB Keyboard and USB Mouse adapter (Logitech Unifying). No usb hard drive connected.

Hi @Peter Suh, As you suggested, I tried to install DS920+. In this case, I can never access the DSM, after it reboots, it asks me for the PAT file again. I've attached the log. The log looks like the previous one. @pocopico Peter said that you could understand what's going on linuxrc.syno.log

Hi! I'm having issues installing DSM 7.1 and keeping it installed. After successfully following the process and installing the DSM, if I reboot, often I have to reinstall the DSM from scratch (I'm shown the installation page and says "not installed". It may depend on any extra (official) package I installed? SynologyNAS> cat /var/log/*rc* START /linuxrc.syno.impl Insert Marvell 1475 SATA controller driver Insert basic USB modules... :: Loading module usb-common ... [ OK ] :: Loading module usbcore ... [ OK ] :: Loading module ehci-hcd ... [ OK ] :: Loading module ehci-pci ... [ OK ] :: Loading module xhci-hcd ... [ OK ] :: Loading module xhci-pci ... [ OK ] :: Loading module usb-storage ... [ OK ] :: Loading kernel modules from extensions ... Loading kmod #0 "e1000e.ko" for pocopico.e1000e (args: ) Loading kmod #0 "dca.ko" for pocopico.igb (args: ) Loading kmod #1 "igb.ko" for pocopico.igb (args: ) :: Loading kernel modules from extensions ... [ OK ] :: Executing "on_boot" custom scripts ... Running "check-e1000e.sh" for pocopico.e1000e->on_boot Loading module e1000e -> Module e1000e loaded succesfully Ran "check-e1000e.sh" for pocopico.e1000e->on_boot - exit=0 Running "check-igb.sh" for pocopico.igb->on_boot Loading module igb -> Module igb loaded succesfully Ran "check-igb.sh" for pocopico.igb->on_boot - exit=0 Running "boot-wait.sh" for redpill-boot-wait->on_boot Still waiting for boot device (waited 1 of 30 seconds) Still waiting for boot device (waited 2 of 30 seconds) Still waiting for boot device (waited 3 of 30 seconds) Still waiting for boot device (waited 4 of 30 seconds) The /dev/synoboot device exists but it does not contain expected partitions (>=3 partitions) ========== BEGIN DUMP OF ALL PARTITIONS DETECTED =========== /dev/sdc1 8192 16785407 16777216 fd /dev/sdc2 16785408 20979711 4194304 fd /dev/sdc5 21257952 7813827135 7792569184 fd /dev/sdd1 8192 16785407 16777216 fd /dev/sdd2 16785408 20979711 4194304 fd /dev/sdd5 21257952 7813827135 7792569184 fd /dev/sde1 2048 500103449 500101402 fd /dev/synoboot1 2048 100351 98304 83 /dev/synoboot2 100352 253951 153600 83 /dev/synoboot3 253952 2097151 1843200 83 ========== END OF DUMP OF ALL PARTITIONS DETECTED ========== Ran "boot-wait.sh" for redpill-boot-wait->on_boot - exit=1 Running "install_rd.sh" for redpill-misc->on_boot Starting ttyd, listening on port: 7681 Ran "install_rd.sh" for redpill-misc->on_boot - exit=0 ERROR: Some of the scripts failed! See above for any with exit != 0 :: Executing "on_boot" custom scripts ... [ OK ] Exit on error [99] rp ext init exec failure... Fri May 6 18:03:49 UTC 2022 none /sys/kernel/debug debugfs rw,relatime 0 0 Under /dev/ I see synoboot synoboot1 synoboot2 synoboot3 It's a Dell Precision 3630 Intel Xeon 2124 Coffee Lake with turbo boost disabled and no HyperThreading 4 cores 32GB UDIMM ECC 2x 4TB HDD 1x 256 Sata m2 ssd No graphic card (also run with a 1050ti, same issue) Thanks for this amazing work anyway!! mattias93log.txt