-
Posts
430 -
Joined
-
Last visited
-
Days Won
8
Posts posted by nemesis122
-
-
he can create a pool with 1 nvme disk or 4 x sata ssd in raid 0 or 6xHDD in Raid 0 to burn this ******* over the network booom
what is better as 25Gbit card yep correct 100 Gbit card
Now you can create smb mutlichannel with 2 cables at the swicht and two on the server = 50 Gbit
https://community.synology.com/enu/forum/1/post/157265
-
On 4/10/2023 at 1:08 PM, Trabalhador Anonimo said:
My system:
MB: M5A78L-M LX/BR
CPU: Athlon 2 X4
RAM: 16GB
HDD: 3x 1TB + 1x 2TB
Onboard NIC: Realtek® 8111E
I was unable to run a virtual machine on the box. it keep saying "fail to turn on".
I got my hands on a new system.
Asus B85M
CPU: Core i5 4770k
RAM: 32GB DDR3
I installed 3622xs with update 4 normally, but could not get a virtual machine to rum, same message again.
Does anyone know where to find a log file to analise what is wrong?
When you have AMD CPU you have to choose a Syno with AMD CPU like 923+ and then the VMM is working
For Intel CPU you have to choose Syno with Intel CPU like 3622xs++
Check that in Bios the virtualsation Feature is activated and alos important is that you not spoofe the MAC Adress you have to use HW Mac Adress phisical in the loader settings
- 1
-
Hi Peter I have to test and let you know but as i would test last time on my gen8 the loader was booting and then the message " the kernel must loading first " i will try again an dlet you know thank you
- 1
-
Can Confirm the same in Virtualbox ater creating the loader is booting but no Webinterface or syno is loading also not in the synology assistant complete new install
tinycore-redpill.v1.0.1.0.m-shell.vmdk.gz
DSM 7.1.42962 Modell 3622xs++
-
https://kb.synology.com/en-ro/DSM/help/DSM/StorageManager/volume_ssd_trim?version=7
oh srry i didnt read the last sentence
WD Red and Samsung EVO are supportet
-
Hi is it possbile install DSM with Mshell without CPU Freq. Addon ?
Because as you know with this addon the Gne8 has not the full CPU performance.
thank you
-
I have tried again with mshell but my CPU is only working with 1600mhz and the issue is happen releated to
On 6/4/2023 at 1:01 PM, nemesis122 said:this addon CPU Frequencies.
is there a solution do not add this addon with mshell ?? because my CPU is a XEON 1420v2 and this Modules doesnt support this old CPU.
thank you very much
Michael
-
the login is
admin
pw: blank (nothing)
5 minutes ago, RedCat said: -
I cant found in bios on my Gen8 this speedstep setting
-
Hi Peter
thank you
then i have to install without this addon in the user config ?
-
-
19 hours ago, haldi said:
Soo.... 7.2 officially released!
Which Loader would you recommend?
Arc Loader: https://github.com/AuxXxilium/arc
ARPL i18n: https://github.com/wjz304/arpl-i18n
HP Microserver Gen 8 Baremetal as always....
3622xs image is still first choice right?
Anyone already got it running?
both loader are working great with the gen8 i would go with ARC
But anyway the new docker App Container Manager is terrible
cant create shortcuts on DSM for docker Containers anymore -- and i dont want creating this with webstation also so i will stay with DSM 7.1
-
22 hours ago, Peter Suh said:
If you mean the loader.img file that is created during TCRP loader building, you can do that with a little modification to the script.
In TCRP rploader.sh, pocopico organizes this file to reduce the size of the backup.
You can also adjust it in my m shell for TCRP.
do you need this file?Block line 283 of my.sh with #.
https://github.com/PeterSuh-Q3/tinycore-redpill/blob/main/my.sh#L283and
Block Line 2954 of rploader.sh with # or
Delete only the /home/tc/redpill-load/loader.img part.https://github.com/PeterSuh-Q3/tinycore-redpill/blob/main/rploader.sh#L2954
Even after building the loader
/home/tc/redpill-load/loader.img
The file will remain undeleted.thank you very much 😍
- 1
-
Hi Peter
Is it possible to save the img file that is not cleaned during the process ?
thank you
-
-
Hi Peter
Thank you very much for this great Loader it is working great
i used 0.9.4.3-2 mbr / DDSML and Friend version for the Gen8 this Loader is working great in any state and is booting very fast also with hypertreading ON for all Models
FYI ARPL bigger 1.03b always had Kernel Panic
We found the issue why ARPL bigger as 1.03b ( tip from AuxXxilium) it was never working on the Gen8 A with my Xeon CPU 4 Core 8 Threads the Problem is Hypertreading !
when it is deactivated it is working 3622 4021 etc
What is strange as example 920+ or 1521+ with device tree then it is working with hypertreading on Loader ARPL/ ARC bigger as 1.03b
- 2
-
Hi Peter
with the last version v0.9.4.3-2
I cant Boot tried with Fat32 and NTFS
system Gen8
error: symbol "grub_disk_get_size" not found
entering Rescure ModeCould you have a look pls
thanks
-
Hi Peter
I think i know now why ARPL bigger as 1.03b always failed at the gen8 because all time i have the error in the console eudev failed also woth Mshell eudev get failed only DDSML (Detected Device Static Module Loading) is working.
So my Questions
ARPL 1.03b is working with DDSML ?because it is working without any issues
ARPL bigger as 1.03b goes with eudev is this the case ?
Do you know why the Gen8 is only workking with DDSML (Detected Device Static Module Loading). ??
thank you very much
-
On 3/11/2023 at 1:01 AM, keasee said:
Hi @Peter Suh
installed bare metal with your fork tcrp friend and used a DS920+ and could update to DSM 7.1.1-42962 Update 4.
Everything seems fine , but it doesn't connect for additional Packages from Synology. Do I need to download each package and install manually ?
... Wait ... I changed from German to English language and now the packages of the Package Center are available as usual ! Maybe a bug ?
... in español the packages are also not available , maybe other languages as well ... see attachment
best keasee
Hi You have to update your time synchronisation in DSM itself
- 1
-
since ARPL 1.03b no ARPL Loader is working at the gen8
what is strange with I3 2cores it is working but with 1230v2 or Xeon it is not working the same bios same HDD Same RAM only the CPU is different
always Eudev has failed maybe is this releated that the loader not found the USB Stick?
-
Dann brauchst du die Änderung mit CPU Governor Command nicht kannst du entfernen bei meiner CPU Xeon 1230v2 macht das die doppelte Performance.
8 hours ago, SpiderPOH said:Hier mal der Geekbench
1. Lauf
https://browser.geekbench.com/v5/cpu/20632306
2. Lauf mit den Änderungen
https://browser.geekbench.com/v5/cpu/20632401 -
was hat der Geekbenchmark ergeben ? mit dem CPU Governor Command und ohne ?
- 1
-
43 minutes ago, SpiderPOH said:
geht leider nicht, gibt nur noch geeckbench 6 und der verlangt die GLIBC_2.27
root@nas:/volume1/temp/Geekbench-6.0.0-Linux# ./geekbench6
/volume1/temp/Geekbench-6.0.0-Linux/geekbench_avx2: /lib64/libm.so.6: version `GLIBC_2.27' not found (required by /volume1/temp/Geekbench-6.0.0-Linux/geekbench_avx2)Quotehttps://cdn.geekbench.com/Geekbench-3.4.4-Linux.tar.gz
https://cdn.geekbench.com/Geekbench-4.3.3-Linux.tar.gz
https://cdn.geekbench.com/Geekbench-4.4.1-Linux.tar.gz
https://cdn.geekbench.com/Geekbench-4.4.4-Linux.tar.gz
https://cdn.geekbench.com/Geekbench-5.4.5-Linux.tar.gz
https://cdn.geekbench.com/Geekbench-5.4.6-Linux.tar.gz
https://cdn.geekbench.com/Geekbench-5.5.1-Linux.tar.gz
- 1
-
try 1.03b let me know 42962 Do not update the addons or Modules inside the Loader !
https://github.com/nemesis122/arpl/releases/download/1.03/arpl-1.0-beta3.img.zip
and Download the .pat file that is presented in the Dialog during the Install Process
Unable to view NVME Disk in DSM 7.2-64570 Update 1 DS918+
in DSM 7.x
Posted
https://github.com/007revad/Synology_enable_M2_volume
https://github.com/007revad/Synology_HDD_db