andreika

I found my error. I put mac address in configuration with ":" symbols. Removing symbols fixed the problem. Thank you for support! Now it is working!!!

Actually dsm boot process was finished, but without network. Should I do what you said? Please see the log, may be i can not see something important? logboot.txt

Аfter I did this - the disk was appeared and installation process was successfully finished. But after reboot the vm(boot was with the same parameters) I can not ping the vm, it does not start. Removing parameters ‘DiskIdxMap=0c00 SataPortMap=1’ boot the vm in dsm installation again without disks.

Hi guys! I have microserver gen10+(xeon 2246) with esxi7.0u2 installed. Boot image made with redpill-tool-chain_x86_64_v0.10 and converted it to vmdk. The system I was trying to assemble redpill-DS918+_7.0.1-42214_b1632684538.img The instructions I used. Firs time I boot I checked the SATA boot, the system Is trying to boot, it even accessible by the web, but it can not see the disks. If I move data disk to Sata Controller0(0:1), then setup sees 2 disks and trying to zero them - of course it fail after some time. Please help to make disks visible on Sata Controller 1 or 2.