waspsoton
-
Posts
68 -
Joined
-
Last visited
Posts posted by waspsoton
-
-
On 19/10/2017 at 6:19 AM, naasking said:
Hmm, a module r8168 is installed and running. The version says 8.044.02, which seems to only be one minor version behind the up to date one on the Realtek site which is 8.045.08.
If someone could point me in the right direction to update this module, I could play around with this and hopefully get it working.
i am having the same problem. did u ever get it fixed?? I am wondering if I should get an intel NIC and see if that sorts the problem
-
I have having the same problem with my amd system. I was thinking it was my network cable but after reading this I am not so sure. I will update my loader to the latest version and see what happens
-
any users with an amd system been able to update past 6.1.3 - update 1. as when I try it just says corrupt and will not update
-
23 hours ago, Elpee said:
Download update 3 file to your hard drive, reboot your nas and manually update from the file you just downloaded.
thanks will try that over the weekend
-
I am trying to install the 6.1.3 update 3 from 6.1.3 update 1. but when I try I am getting an error "fail to update the file. the file is probably corrupt". I have re downloaded it three times. any ideas??
-
On 04/08/2017 at 6:48 AM, lunzet said:
not getting your point. why not? its working fine see my signature
I am running this on an asrock a75-hvs motherboard. I didn't even look for the c1 option. But it installed without any problems
-
1 hour ago, dutchnas said:
But the latest loader doesn't support AMD as mentioned in the start post, i've tried but was unsuccessful.
check this post out. I am currently running the latest update on my amd system.
-
5 hours ago, khile said:
Due to health issues and a C&D letter i will no longer be providing updates.
Who sent the c&d letter??
-
Motherboard: Asrock A75M-HVS
RAM(ecc or non ECC): non ECC
HDD: type / config 2x 3tb western digital reds, 3tb seagate, 2tb samsung drive via LSI-9211-8i
LAN: Onboard 1 Gigabit ethernet
BareMetal or Virtual (ESXi/Proxmox): Baremetal
Xpenology Build: DSM 6.1.3-15152
Whats working / not working: all working
Loader: Khile-JunsMod102a-test-NICadd
Motherboard: HP n54L
RAM(ecc or non ECC): Non ECC
HDD: type / config 4x 4tb Western digital reds and 500gb drive
LAN: ONboard 1 gigabit ethernet
BareMetal or Virtual (ESXi/Proxmox): baremetal
Xpenology Build: 6.0.2-8451 update 9
Whats working / not working:
Loader: Jun v1.01
-
I have just tried Linux and it see all the drives so I have no idea. Any help would be good
-
5 hours ago, korotkov said:
maybe you have separate sata controllers?
One works without issues, and the second one not supported. It's just my opinion.
Did it worked on earlier versions?
I have just had a look at the manual and I don't think it is. it states in the manal there is only one controller AMD A75 FCH
-
2 hours ago, korotkov said:
maybe you have separate sata controllers?
One works without issues, and the second one not supported. It's just my opinion.
Did it worked on earlier versions?
the motherboard is a asrock A75M-HVS so from what I can tell there isn't two controllers. I am sure its the software as I can see all the drives in the bios.
-
I have a strange issue. I have 6.13 installed but I can only get dsm to see 4 drives. There is 6 connected to the machines data ports. Any ideas? I don't think it's the motherboard as when I go into the bios I can see all the drives.
-
I have installed 6.1 on my Asrock a75m-HVS but It will only see 4 of the 6 drives. I have read that I need to remap the drives but I am not sure how to do it. I will be putting in a LSI9211-it and I am planning on using this to add another 8 drives.
what settings should I use?
-
i can confirm this works on a A75M-HVS motherboard with a amd 3500
-
will this work on a and board that isn't the hp?
-
any idea when v1.02b will support AMD?
-
Anyone updated to 6.1 yet??
-
Anyone done update 9
-
Anyone know if there is a way to make it bootloader select the AMD option automatically. So u don't need a keyboard and mo itor??
-
i have tired to search for it but how do i edit the img file on a mac. i seem to remember reading on now to do it but i have forgotten on now to. please help
-
Worked perfectly on N54L from 5.0 on Nanoboot.
Thanks you very much.
Just one thing, i have two Network card, one integrated, worked.
And another on pci-e port, and nothing...
I see on the interface, but when i plug the cable, cannot ping....
It's RTL8111 chipset...
Maybe i forgot something ???
EDIT:
It's worked perfectly, i made a misstake....
I use the same MAC than my other NAS, and with the rule on my router for this mac, the same IP was set...
So IP address was in conflict and the new Synology was not been reachable... I saw the problem when i plugged two network card in same time.
So any problem for me with N54L and 6x2To.
Congratulations.
PS: I made Update 6.
This is good to know as I will be making the same upgrade today
-
Worked perfectly on N54L from 5.0 on Nanoboot.
Thanks you very much.
Just one thing, i have two Network card, one integrated, worked.
And another on pci-e port, and nothing...
I see on the interface, but when i plug the cable, cannot ping....
It's RTL8111 chipset...
Maybe i forgot something ???
EDIT:
It's worked perfectly, i made a misstake....
I use the same MAC than my other NAS, and with the rule on my router for this mac, the same IP was set...
So IP address was in conflict and the new Synology was not been reachable... I saw the problem when i plugged two network card in same time.
So any problem for me with N54L and 6x2To.
Congratulations.
PS: I made Update 6.
This is good to know as I will be making the same upgrade today
-
That's fine, I can get that card for roughly the same price.
DSM 6.0 network drops? SMB particularly bad
in AMD
Posted
I might try putting dsm 5 on the server and see if its any better