waspsoton
-
Posts
68 -
Joined
-
Last visited
Everything posted by waspsoton
-
I might try putting dsm 5 on the server and see if its any better
-
i am having the same problem. did u ever get it fixed?? I am wondering if I should get an intel NIC and see if that sorts the problem
-
I have having the same problem with my amd system. I was thinking it was my network cable but after reading this I am not so sure. I will update my loader to the latest version and see what happens
-
any users with an amd system been able to update past 6.1.3 - update 1. as when I try it just says corrupt and will not update
-
thanks will try that over the weekend
-
I am trying to install the 6.1.3 update 3 from 6.1.3 update 1. but when I try I am getting an error "fail to update the file. the file is probably corrupt". I have re downloaded it three times. any ideas??
-
I am running this on an asrock a75-hvs motherboard. I didn't even look for the c1 option. But it installed without any problems
-
check this post out. I am currently running the latest update on my amd system.
-
Who sent the c&d letter??
-
Motherboard: Asrock A75M-HVS RAM(ecc or non ECC): non ECC HDD: type / config 2x 3tb western digital reds, 3tb seagate, 2tb samsung drive via LSI-9211-8i LAN: Onboard 1 Gigabit ethernet BareMetal or Virtual (ESXi/Proxmox): Baremetal Xpenology Build: DSM 6.1.3-15152 Whats working / not working: all working Loader: Khile-JunsMod102a-test-NICadd Motherboard: HP n54L RAM(ecc or non ECC): Non ECC HDD: type / config 4x 4tb Western digital reds and 500gb drive LAN: ONboard 1 gigabit ethernet BareMetal or Virtual (ESXi/Proxmox): baremetal Xpenology Build: 6.0.2-8451 update 9 Whats working / not working: Loader: Jun v1.01
-
I have just tried Linux and it see all the drives so I have no idea. Any help would be good
-
I have just had a look at the manual and I don't think it is. it states in the manal there is only one controller AMD A75 FCH
-
the motherboard is a asrock A75M-HVS so from what I can tell there isn't two controllers. I am sure its the software as I can see all the drives in the bios.
-
I have a strange issue. I have 6.13 installed but I can only get dsm to see 4 drives. There is 6 connected to the machines data ports. Any ideas? I don't think it's the motherboard as when I go into the bios I can see all the drives.
-
I have installed 6.1 on my Asrock a75m-HVS but It will only see 4 of the 6 drives. I have read that I need to remap the drives but I am not sure how to do it. I will be putting in a LSI9211-it and I am planning on using this to add another 8 drives. what settings should I use?
-
i can confirm this works on a A75M-HVS motherboard with a amd 3500
-
will this work on a and board that isn't the hp?
-
any idea when v1.02b will support AMD?
-
Anyone updated to 6.1 yet??
-
Anyone done update 9
-
Anyone know if there is a way to make it bootloader select the AMD option automatically. So u don't need a keyboard and mo itor??
-
i have tired to search for it but how do i edit the img file on a mac. i seem to remember reading on now to do it but i have forgotten on now to. please help
-
This is good to know as I will be making the same upgrade today
-
This is good to know as I will be making the same upgrade today
-
That's fine, I can get that card for roughly the same price.