MDSimpson

I have removed the QLogic card and installed a Mellanox Connectx3, works so much better. Drivers are preinstalled.

I can see the MAC address of the card in Synology, but no connectivity. Tried swapping the Tx/Rx on one end.. Nothing..

Maybe the qlge is all I need...? Driver shows as in use. Maybe my issue is elsewhere.. lspci -k | grep 'Kernel driver' Kernel driver in use: pcieport Kernel driver in use: pcieport Kernel driver in use: ahci Kernel driver in use: ohci_hcd Kernel driver in use: ehci-pci Kernel driver in use: ohci_hcd Kernel driver in use: ehci-pci Kernel driver in use: ohci_hcd Kernel driver in use: ehci-pci Kernel driver in use: qlge Kernel driver in use: qlge Kernel driver in use: tg3

That is where I started, I downloaded that extra.lzma file, extra3615_v4.8.zip Just need to get it loaded..

Thanks IG88. I have tried to get the headers, but the apt install linux-headers-$(uname -r) says it is unable to locate linux-headers-3.10.102 How can I get passed the make commands that fail? I am running DSM 6.1.7-15284 Update 3. - DS3615xs qlcnic: is what I need, it is a converged ethernet 10gb card. Actual model is QLE8152.

Help..... I am stuck at the above point in this process. I am trying to get a QLogic QLE card running in my box, it is listing within the extra.lzma file, but I cannot seem to get there. I did have an issue running the initial command apt-get install mc make gcc build-essential kernel-wedge libncurses5 libncurses5-dev libelf-dev binutils-dev kexec-tools makedumpfile fakeroot linux-kernel-devel lzma bc - it failed on linux-kernal-devel.....

Hi, I also have N54L running DSM 6.1 and DS3615xs. I am looking for 10gbe to connect to Cisco 3750x switch with 10GB trunk. What model Mellanox card physically fits into the N54L? IBM Mellanox Connectx-3 Dual-port SFP 10gbe Adapter 98Y2404 is what I am looking at.... Thanks in advance.