Hallo zusammen,
Ich habe leider ein Problem, und hoffe hier auf eure Hilfe.
Kurz zum Aufbau und aktuellem Status
SHR-1 mit 5 (vor dem Stress 4) WD Red + HDDs : 3x 3TB und 2x 4TB (eine der 3TB Platten ist derzeit nicht eigebunden s.u.)
---> Volume 1 , EXT4 , 7 TB (Kein aktuelles Backup..... Shame on me)
---> Volume 3 , BTRFS, 260 GB (Backup 2 Tage alt)
---> Volume 4, BTRFS, 62 GB (Backup 2 Tage alt)
Nach dem Update auf DSM 7.0 welches mehrere Tage Problemlos lief, baute ich gestern eine weitere 4TB Platte ein und fügte sie meinem SHR-1 hinzu. Bei ca. 75 % steig dann eine der 3TB Platten aus, mit stauts "Abgestürzt" die Volumes liefen alle noch, und das Raid hat sich trotz Status (Fehlerhaft) weiter erweitert, kurz vor Ende, ist die Kiste dann gänzlich eingefroren, und hat irgendwann nicht mal mehr auf pings reagiert.
Nach einem Neustart lief die Speichererweiterung einfach weiter, jedoch jedoch nun war neben der Festplatte auch mein größtes Volume (1) "Abgestürzt".
Sowie die beiden anderen Volumes auf dem selben SHR-1 Speicherpool in ReadOnly gegangen.
Ich habe die Raid- Erweiterung dann zuende laufen lassen. Die Defekte Platte habe ich ausgetauscht(Auch wenn sie gar nicht so defekt scheint)
Jedoch bleibt mein größtes Volume (und da es Medien sind, fehlt hier leider ein aktuelles Backup) weg, und ich möchte ungern den Raid reparieren mit der neuen Platte, und dabei eventuell die noch vorhandenen Daten des Volume überschreiben und es endgültig zerstören.
Daher würde ich bevor ich das Raid repariere gerne das Volume wieder eingehängt bekommen. Um sicherzugehen das ich nichts weiter beschädige.
Anbei ein Paar Infos aus der Konsole:
cat /etc/fstab:
none /proc proc defaults 0 0
/dev/root / ext4 defaults 1 1
/dev/mapper/cachedev_0 /volume1 ext4 usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,relatime,ro,nodev 0 0
/dev/mapper/cachedev_1 /volume3 btrfs auto_reclaim_space,ssd,synoacl,relatime,nodev 0 0
/dev/mapper/cachedev_2 /volume4 btrfs auto_reclaim_space,ssd,synoacl,relatime,nodev 0 0
lvdisplay:
Using logical volume(s) on command line.
--- Logical volume ---
LV Path /dev/vg1/syno_vg_reserved_area
LV Name syno_vg_reserved_area
VG Name vg1
LV UUID HOyuTp-ozYw-WG4X-M1vA-WqQW-tRIm-CUoU8h
LV Write Access read/write
LV Creation host, time ,
LV Status available
# open 0
LV Size 12.00 MiB
Current LE 3
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 1024
Block device 249:0
--- Logical volume ---
LV Path /dev/vg1/volume_1
LV Name volume_1
VG Name vg1
LV UUID o1PTXF-fKVl-9mKe-TFpF-lAd7-0TE4-8qgHGM
LV Write Access read/write
LV Creation host, time ,
LV Status available
# open 1
LV Size 7.84 TiB
Current LE 2055680
Segments 16
Allocation inherit
Read ahead sectors auto
- currently set to 1024
Block device 249:1
--- Logical volume ---
LV Path /dev/vg1/volume_3
LV Name volume_3
VG Name vg1
LV UUID 4xFm7L-rVxD-w2Fc-GLQb-Hde5-9mLi-RX5vOa
LV Write Access read/write
LV Creation host, time ,
LV Status available
# open 1
LV Size 275.00 GiB
Current LE 70400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 768
Block device 249:2
--- Logical volume ---
LV Path /dev/vg1/volume_4
LV Name volume_4
VG Name vg1
LV UUID W6q8V3-wRjS-7pG6-Ww94-6oLm-vl3H-PCq2eR
LV Write Access read/write
LV Creation host, time ,
LV Status available
# open 1
LV Size 64.00 GiB
Current LE 16384
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 768
Block device 249:3
vgdisplay:
Using volume group(s) on command line.
--- Volume group ---
VG Name vg1
System ID
Format lvm2
Metadata Areas 4
Metadata Sequence No 55
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 4
Open LV 3
Max PV 0
Cur PV 4
Act PV 4
VG Size 8.17 TiB
PE Size 4.00 MiB
Total PE 2142630
Alloc PE / Size 2142467 / 8.17 TiB
Free PE / Size 163 / 652.00 MiB
VG UUID NyGatF-b85O-Ceg3-MuPY-sOTW-S2bo-P3ODO5
--- Logical volume ---
LV Path /dev/vg1/syno_vg_reserved_area
LV Name syno_vg_reserved_area
VG Name vg1
LV UUID HOyuTp-ozYw-WG4X-M1vA-WqQW-tRIm-CUoU8h
LV Write Access read/write
LV Creation host, time ,
LV Status available
# open 0
LV Size 12.00 MiB
Current LE 3
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 1024
Block device 249:0
--- Logical volume ---
LV Path /dev/vg1/volume_1
LV Name volume_1
VG Name vg1
LV UUID o1PTXF-fKVl-9mKe-TFpF-lAd7-0TE4-8qgHGM
LV Write Access read/write
LV Creation host, time ,
LV Status available
# open 1
LV Size 7.84 TiB
Current LE 2055680
Segments 16
Allocation inherit
Read ahead sectors auto
- currently set to 1024
Block device 249:1
--- Logical volume ---
LV Path /dev/vg1/volume_3
LV Name volume_3
VG Name vg1
LV UUID 4xFm7L-rVxD-w2Fc-GLQb-Hde5-9mLi-RX5vOa
LV Write Access read/write
LV Creation host, time ,
LV Status available
# open 1
LV Size 275.00 GiB
Current LE 70400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 768
Block device 249:2
--- Logical volume ---
LV Path /dev/vg1/volume_4
LV Name volume_4
VG Name vg1
LV UUID W6q8V3-wRjS-7pG6-Ww94-6oLm-vl3H-PCq2eR
LV Write Access read/write
LV Creation host, time ,
LV Status available
# open 1
LV Size 64.00 GiB
Current LE 16384
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 768
Block device 249:3
--- Physical volumes ---
PV Name /dev/md2
PV UUID aWjDFY-eyNx-uzPD-oqBO-5Gym-54Qr-zzkxUZ
PV Status allocatable
Total PE / Free PE 175270 / 0
PV Name /dev/md3
PV UUID J2CWXO-UmYK-duLr-3Rii-QcCe-nIoZ-aphBcL
PV Status allocatable
Total PE / Free PE 178888 / 0
PV Name /dev/md4
PV UUID 9xHJQ8-dK65-2lvJ-ekUz-0ezd-lFGD-pDsgZx
PV Status allocatable
Total PE / Free PE 1073085 / 0
PV Name /dev/md5
PV UUID GQwpPp-1c3c-4MSR-WvaB-2vEc-tMS6-n9GZvL
PV Status allocatable
Total PE / Free PE 715387 / 163
LVM Backup vor der Speichererweiterung:
:~$ ls -al /etc/lvm/backup/
total 16
drwxr-xr-x 2 root root 4096 May 23 17:55 .
drwxr-xr-x 5 root root 4096 May 23 17:44 ..
-rw-r--r-- 1 root root 5723 May 23 17:53 vg1
Ich bin Dankbar für jede Hilfe.
Schönen Abend noch
Steven
PS: Ja ich weis, es geht genau das Volume flöten von dem ich kein Backup habe welch Ironie