moondefer

OK Confirmed than i have the same thing that happen to me when i update to 6.1 to 6.2 many year before 4 Disk on the LSI 2308 inverse their order ? Again i have inverted the 4 cable to the 4 disk for have the good order (1 sas to 4 sata cable) Now it seems the order is good now # mdadm --detail /dev/md2 /dev/md2: Version : 1.2 Creation Time : Tue Nov 13 20:04:35 2018 Raid Level : raid5 Array Size : 40989903808 (39091.02 GiB 41973.66 GB) Used Dev Size : 5855700544 (5584.43 GiB 5996.24 GB) Raid Devices : 8 Total Devices : 8 Persistence : Superblock is persistent Update Time : Tue Aug 15 02:41:35 2023 State : clean Active Devices : 8 Working Devices : 8 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 64K Name : DiskStation2:2 (local to host DiskStation2) UUID : f5cb8545:3f29b3e3:70e01c5b:283ef78f Events : 154625 Number Major Minor RaidDevice State 11 8 3 0 active sync /dev/sda3 7 8 19 1 active sync /dev/sdb3 2 8 35 2 active sync /dev/sdc3 8 8 51 3 active sync /dev/sdd3 4 8 67 4 active sync /dev/sde3 12 8 83 5 active sync /dev/sdf3 9 8 99 6 active sync /dev/sdg3 10 8 115 7 active sync /dev/sdh3 But i don't see my data again The raid md2 seems to inchanged cat /proc/mdstat Personalities : [raid1] [raid6] [raid5] [raid4] [raidF1] md2 : active raid5 sda3[11] sdh3[10] sdg3[9] sdf3[12] sde3[4] sdd3[8] sdc3[2] sdb3[7] 40989903808 blocks super 1.2 level 5, 64k chunk, algorithm 2 [8/8] [UUUUUUUU] md1 : active raid1 sda2[0] sdh2[7] sdg2[6] sdf2[5] sde2[4] sdd2[3] sdc2[2] sdb2[1] 2097088 blocks [12/8] [UUUUUUUU____] md0 : active raid1 sda1[0] sdh1[7] sdg1[6] sdf1[5] sde1[4] sdd1[3] sdc1[2] sdb1[1] 2490176 blocks [12/8] [UUUUUUUU____] Oh my god, it's because i have deactivated my admin user as they said... very stupid grrrrrrrrrr, ok i go and search how replace my old admin by the new user.

Today after some test with a test drive i decided to try a real upgrade from 6.2 to 7.2 1) have build a ARPL loader for update to 7.0.1 Update OK I must repair some packet and i made an config file save Then i clic on the DSM link for update to 7.2-64570 Update 3 The loader write to the screen connected to the nas than zimage was changed from 7.0.1 to 7.2 I don't nkow why but after this i have only 4 icon on the desktop, before that i have all my icon I don't understand why but my group and volume 1 was here but i can't see all my DATA ? So i go to Stockage and i see than my green disk was set to 1-4 then 7-10 Because the loader find my 1 host (intel c224) with 6 port and 4 disk, but i use only the 4 first port (sata3 6 GB/s) and not other (the last 2 port was only sata2 3 GB/s) But the loader have put satamap value to 6, he count the last 2 port than i don't use The ARPL loader is a pain for change satamap value or do command line, i think TCRP is most better for do all we want I made another stick loader with ARC I modify satamap value to 4 At first connection i have a recoverable status and choose it but finish with error I restart then in loader i choose restore from DSM (i tested this with success before when tested) Then i could start DSM correctly with all updated and my disk was to port 1-8 correctly But again, group and volume 1 was here but can't see all my data How i can retrieve the data ? their are here but not visible ? we can see 8.7 To free on volume1 With SSH i can see this : /$ cat /proc/mdstat Personalities : [raid1] [raid6] [raid5] [raid4] [raidF1] md2 : active raid5 sda3[11] sde3[10] sdf3[9] sdg3[12] sdh3[4] sdd3[8] sdc3[2] sd b3[7] 40989903808 blocks super 1.2 level 5, 64k chunk, algorithm 2 [8/8] [UUUUUU UU] md1 : active raid1 sda2[0] sde2[7] sdf2[6] sdg2[5] sdh2[4] sdd2[3] sdc2[2] sdb2[ 1] 2097088 blocks [12/8] [UUUUUUUU____] md0 : active raid1 sda1[0] sde1[7] sdf1[6] sdg1[5] sdh1[4] sdd1[3] sdc1[2] sdb1[ 1] 2490176 blocks [12/8] [UUUUUUUU____] unused devices: <none> mdadm --detail /dev/md2 /dev/md2: Version : 1.2 Creation Time : Tue Nov 13 20:04:35 2018 Raid Level : raid5 Array Size : 40989903808 (39091.02 GiB 41973.66 GB) Used Dev Size : 5855700544 (5584.43 GiB 5996.24 GB) Raid Devices : 8 Total Devices : 8 Persistence : Superblock is persistent Update Time : Tue Aug 15 01:19:15 2023 State : clean Active Devices : 8 Working Devices : 8 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 64K Name : DiskStation2:2 (local to host DiskStation2) UUID : f5cb8545:3f29b3e3:70e01c5b:283ef78f Events : 154623 Number Major Minor RaidDevice State 11 8 3 0 active sync /dev/sda3 7 8 19 1 active sync /dev/sdb3 2 8 35 2 active sync /dev/sdc3 8 8 51 3 active sync /dev/sdd3 4 8 115 4 active sync /dev/sdh3 12 8 99 5 active sync /dev/sdg3 9 8 83 6 active sync /dev/sdf3 10 8 67 7 active sync /dev/sde3 Someone can help me please ? parhaps with mount, unmount, perhaps reassemble raid ? If i delete volume 1 and recreate one data can apear again ? Perhaps the disk order have changed ? i have this one time with 6.2 loader at a moment disk order have changed but all work correctly

Yes you are true ARC loader have only 7.1 and 7.2, only TCRP and ARPL have 7.0 and 7.1 and 7.2. So this is the question for migrating 6.2 to 7.2, we must use 2 loader for the task if we want ARC loader for the final ? i don't know. I need really a scenario for do that... I think i have noticed the partition modification when i made my test with 1 drive, after a succefully update with 7.0.1 i noticed a message in DSM who ask me to restart the DSM after the first start because the HDD database was modified and need a restart. I understand now why when i try directly to update to 7.1 this can't work. And why i have a success when i used ARPL to update to 7.0.1 then i haved restart for database HDD as asked, then i clic on DSM link update in DSM for 7.2 update and then i have succes to update to 7.2 only this time and the loader put a message on the screen as zimage was updated 7.0 to 7.2. So the loader have detected the update and update the loader automatically !!! if this is that it's a super loader.

OK With your previous reply alepodj and dj_nsk i understand now than if i want update my xpenology DS3617xs in 6.2.3 with 8 raid disks to DS3622xs+ 7.2 i must before start to update it to 7.0.1 first, but if i do this what i must do after for update it to 7.2 ? Yes i see than with 7.x their are more partition than 6.x. But i have the same problems than alepodj with my test with only 1 blank disk for test before a try for the true update And this problem afraid me to try a true update with my 8 raid disks because it's unsuccefull with only a try to install a fresh 7.2 on a formated disk. When i haved made test with only 1 formated disk, 7.0.1 install allways work but not 7.1 or 7.2, and after if i try to update to 7.1 or 7.2 with link or my pat file from computer i haved allways the same error at 55% corrupted file

Thanks for the reply dj_nsk The ARC loader seems to be most advandced. But with the same result When the loader start i have one red line but perhaps it's normal ? "user requested editing..." What i try : I put a formated 6 Tb disk and the usb stick with fresh ARC loader I choose DS3622xs+ then 7.2 version ... And again when i put the pat file, with DSM link or with my pat file on computer same result, 55% then error said image is corrupted. i have an xpenology since 5.2 loader With 5.2 loader install was very simple after editing config file With 6.X loader, sataportmap parameters need to be edit all the time we add a new disk Example with 6.X loader, i started with 6 diks, my sataportmap was 42 then 43 with 7 disk then 44 with 8 disks On the motherboard their are 2 hosts : SATA/SAS Storage motherboard : PCH Built-in Storage- Intel® C224 : 4 x SATA3 6.0 Gb/s (from mini SAS connector), 2 x SATA2 3.0 Gb/s, Support RAID 0, 1, 5, 10 and Intel® Rapid Storage Additional SAS Controller- LSI 2308: 8 x SAS2 6Gbps ( from 2x mini SAS 8087 connector) I must said than LSI SAS controller was in IT mode (unraid )and not in IR mode As i use only 4 port on C224 (because last 2 was only 3 gb/s) then i want use 8 port on LSI 2308 So as i said before sataportmap work good with 6.x loader with 4x parameters I found this strange with 7.X loader (with only 1 blank disk for test) : With TCRP loader : I ve seen loader haved driver for intel c220 then it find 1 disk (test disk connected so normal) and 6 ports (Yes it's right but i don't want to use lhe last 2) And it find LSI SAS and it download SCSI driver for it, said nothing about port then it write sataportmap = 6 and DiskIdxMap=00 With ARPL loader it write sataportmap = 6 and DiskIdxMap=00ff and i read sataportmap infos in loader it said 6 green port for intel and 7 green port for LSI With ARC loader it write sataportmap = 1 and DiskIdxMap=00 So i have a different result with 3 different loader I don't know if this is the reason why i have the error with pat file corrupted at 55% ? I can't find a solution alone, i need help for a solution so thanks to all for help link to the motherboard : https://www.asrockrack.com/general/productdetail.asp?Model=E3C224D4I-14S#Specifications link to the motherboard manual : https://download.asrock.com/Manual/E3C224D4I-14S.pdf link to the LSI 2308 manual : https://www.supermicro.com/manuals/other/LSI_HostRAID_2308.pdf Thanks for the help

Hi, i need help please Motherboard : ASROCK E3C224D4I-14S with SAS LSI 2308 in IT mode Cpu : intel core i5 4690k 4th generation Memory : 32 Gb ECC I'm actually with DSM 6.2.3.25426 Update 3 with DS3617xs I've decided to made test for update to DSM 7.2-64570 with DS3622xs+ I haved try loader TCRP and ARPL with only 1 disk for tested before try a real update with my 8 raid disks But i don't understand why all the time i have this error when i must install DSM pat file if i do a usb stick with 7.1-42661 loader or a 7.2-64570 loader : Curiously if i do a usb stick loader with 7.0.1-42218 with TCRP or ARLP i don't have this error when i choose my DSM pat file 7.0.1-42218 ? So i try this : loader with 7.0.1 then update to 7.1.1-42962 with DSM link work then i haved try to update again with DSM link to 7.2-64570 but error (21) and update is impossible loader with 7.0.1 then update directly with DSM link 7.2-64570 work and on the loader i found line with infos than zimage was changed to 7.0.1 to 7.2 but in DSM i'm with update 3 and in the loader infos i'm with update 2 ??? After this i try the last test on my real raid with the usb stick used just before who successfully updated zimage to 7.2. But again after migrate options proposed (ds3617xs to ds3622xs+ so it's good) i choose the DSM pat file and again i have this damned error message. Pat file i haved , found on synology center : 7.0.1-42218 : DSM_DS3622xs+_42218.pat OK only with this 7.1-42661 : DSM_DS3622xs+_42661.pat KO 7.1-42661 (with Update 1) : DSM_DS3622xs+_42661.pat KO (this include update 1) 7.2-64570 (with Update 1) : DSM_DS3622xs+_64570.pat KO (this include update 1) On synology download center i can't find 7.1-42661 without update 1 and 7.2-64570 without update 1 Only post i haved found on this it's with someone with a CPU 3th generation but it's not my case, i found info on my intel core i5 4690k and apparently it's a 4th generation and have FMA3 instruction. Thanks for your help I add infos from the manual motherboard on the CPU possible options (it's not my cpu in the picture) because i seen some post where people deactivated somme C options

Possible to add this to KERNEL options in future release please ? Bus options (PCI etc.) ---> or <*> PCI Stub driver Device Drivers ---> [*] IOMMU Hardware Support ---> [*] Support for intel IOMMU using DMA Remapping Devices [*] Enable Intel DMA Remapping Devices by Default Need this for doing passthrough with virtualbox. Explain here : viewtopic.php?f=2&t=12525&p=56465#p56465 Thanks

Same problem here. I have 2 VM, 1 windows 7 and 1 unbuntu, in bridged mode with different ports for each VM. If i launch a second VM when the first is running phpvirtualbox stop responding, the VM stop at 20% and after, same if i try to stop the packet virtualbox not responding and same if i try to shutdown the xpenology server not responding. Only hard shutdown work after this.

Hello Someone know if this is possible to enable IOMMU for do passthrough with Virtualbox please ? I have this processor : OK for VT-D and VT-X http://ark.intel.com/fr/products/80811/ ... o-3_90-GHz I have this motherboard : OK for VT-D http://www.asrockrack.com/general/produ ... ifications I tried to use this tutorial : https://www.virtualbox.org/manual/ch09. ... assthrough I haved try to modified my syslinux.cfg after read this infos : https://github.com/andy928/xpenology/bl ... meters.txt AND http://lime-technology.com/forum/index. ... ic=40683.0 APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs ........................ loglevel=0 vga=0x305 TO APPEND intel_iommu=on iommu=pt root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs ......................... loglevel=0 vga=0x305 But same with this line no success too. And if i wrote "dmesg | grep -e IOMMU -e DMAR" in ssh console i have this answer DiskStation2> dmesg | grep -e IOMMU -e DMAR [ 0.000000] ACPI: DMAR 00000000dd9049e8 00080 (v01 INTEL BDW 00000001 INTL 00000001) [ 39.297358] vboxpci: IOMMU not found (not compiled) DiskStation2> AND with dmesg : [ 37.268790] vboxdrv: Found 4 processor cores [ 37.284869] vboxdrv: TSC mode is Invariant, tentative frequency 3492211717 Hz [ 37.284870] vboxdrv: Successfully loaded version 5.0.14 (interface 0x00240000) [ 39.287197] VBoxNetFlt: Successfully started. [ 39.288766] VBoxNetAdp: Successfully started. [ 39.297354] VBoxPciLinuxInit [ 39.297358] vboxpci: pci-stub module not available, cannot detach PCI devices [ 39.297358] vboxpci: IOMMU not found (not compiled) [ 41.292265] SUPR0GipMap: fGetGipCpu=0x3 The only succefull thing than i can is to attach my nvidia card with ssh console : VBoxManage modifyvm "Windows 7 Sp1 x64" --pciattach 01:00.0@01:05.0 Where 01:00.0 is the correct address than i obtain after wrote lspci in ssh console. But after the VM can't boot with message : Failed to open physical device: not existing, or not available (VERR_ACCESS_DENIED) And i must use --pcidetach for boot again. So IOMMU not found (not compiled) !!!!!!!! and pci-stub module is not available this is needeed too in the virtualbox tutorial. I use the last xenoboot, his kernel don't have IOMMU compiled in ? How i can enable IOMMU for do passthrough with virtualbox please ? THANKS for help.

Hello all First i must said big thanks to xpenology and phpvirtualbox creators. Very good work. Second, sorry for bad english i'm french. Three : Question : I haved a virtual image of windows 7 in virtualbox on my xpenology core i5 32GB asrock. All work good but i want install bluestack + a bot for clash of clan on my windows 7 VM. The problem is i can't install bluestack or use others android emulator because i can't activate 3d acceleration in phpvirtualbox. Droid4x and MEmu same result , "your graphic card need to be updated". Guest addition are installed in the windows 7 VM. I think it's because the host don't have openGL and 3d support, because no drivers are installed on the host who are an xpenology. I haved try to enable 3d with virtualbox commandline with SSH with putty and i have this error ? : DiskStation2> /opt/VirtualBox/VBoxManage modifyvm "Windows 7 Sp1 x64" accelerate 3d on VBoxManage: error: Failed to initialize COM! (hrc=NS_ERROR_FAILURE) if i load VM on another PC with virtualbox on it and i check accelerate 3d and then reload the vm with phpvirtualbox the accelerate 3d is checked but i can't launch the VM i have this message : "This VM was configured to use 3D acceleration. However, the 3D support of the host is not working properly and the VM cannot be started. To fix this problem, either fix the host 3D support (update the host graphics driver?) or disable 3D acceleration in the VM settings (VERR_NOT_AVAILABLE)" How can i do this ? Can i install a driver for my graphic card on my xpenology ? with a linux driver perhaps because xpenology kernel is a 3.0.15 ? Or i need to compil a new kernel with graphic card driver for wpenology ? so i must ask for this here if creator can add the driver because i don't know this very well ? I haved seen many post for asked driver add but there is only network or storage, this is logic for a nas perhaps, but now with virtualization on a nas we must have graphic driver too, no ? !!! This is frustrating because all work good but without graphic card driver on host system, virtualbox was restricted in his use. I have seen tutorial for installing androidx86 in virtualbox for play clash of clan but my goal is to put a bluestack + bot install in a VM and not only play clash of clan in a VM. Thanks for your reply