Running GPU i915 on DSM7.2

[matyyy]

Hey, I have a problem, I wanted to run pass the integrated graphics card to DSM (DS920+) so that Plex can transcode videos more efficiently, but unfortunately I can't get it to work. 

 

The whole thing is run in proxmox - vm with TCRP.

 

My CPU IS: 11th Gen Intel(R) Core(TM) i5-11400T @ 1.30GHz

 

The graphics card is visible under lspci:

0000:00:11.0 VGA compatible controller: Intel Corporation RocketLake-S GT1 [UHD Graphics 730] (rev 04) (prog-if 00 [VGA controller])
        Subsystem: Gigabyte Technology Co., Ltd Device d000
        Flags: fast devsel, IRQ 10
        Memory at fd000000 (64-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        I/O ports at f040 [size=64]
        Expansion ROM at fe640000 [disabled] [size=128K]
        Capabilities: [40] Vendor Specific Information: Len=0c <?>
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
        Capabilities: [ac] MSI: Enable- Count=1/1 Maskable+ 64bit-
        Capabilities: [d0] Power Management version 2

 

I tried to install i915 from another thread on this forum (https://xpenology.com/forum/topic/59909-i915ko-backported-driver-for-intel-10th-gen-ds918-ver-701-up3), but still the /dev/dri device does not appear.

[dj_nsk]

5 часов назад, matyyy сказал:

Hey, I have a problem, I wanted to run pass the integrated graphics card to DSM (DS920+) so that Plex can transcode videos more efficiently, but unfortunately I can't get it to work. 

 

The whole thing is run in proxmox - vm with TCRP.

 

My CPU IS: 11th Gen Intel(R) Core(TM) i5-11400T @ 1.30GHz

 

The graphics card is visible under lspci:

0000:00:11.0 VGA compatible controller: Intel Corporation RocketLake-S GT1 [UHD Graphics 730] (rev 04) (prog-if 00 [VGA controller])
        Subsystem: Gigabyte Technology Co., Ltd Device d000
        Flags: fast devsel, IRQ 10
        Memory at fd000000 (64-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        I/O ports at f040 [size=64]
        Expansion ROM at fe640000 [disabled] [size=128K]
        Capabilities: [40] Vendor Specific Information: Len=0c <?>
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
        Capabilities: [ac] MSI: Enable- Count=1/1 Maskable+ 64bit-
        Capabilities: [d0] Power Management version 2

 

I tried to install i915 from another thread on this forum (https://xpenology.com/forum/topic/59909-i915ko-backported-driver-for-intel-10th-gen-ds918-ver-701-up3), but still the /dev/dri device does not appear.

this works with CPUs no higher than the 10th generation