Mooney Posted August 31, 2022 Share #1 Posted August 31, 2022 Has anyone tried running this pci SATA while using 7.1.0 version of DSM? Any advices would be appretiated. Do I have to add it during the preparation for the build or can be added later. If possible to use it at all. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 31, 2022 Share #2 Posted August 31, 2022 Try to build a DS3622xs+ with the Adaptec aic94xx SAS/SATA driver. Install the controller and build using the following: ./rploader.sh clean ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh serialgen DS3622xs+ ./rploader.sh identifyusb ./rploader.sh satamap ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/aic94xx/rpext-index.json ./rploader.sh build broadwellnk-7.1.0-42661 Save your output (incase you have errors so that you can post it) then reboot Quote Link to comment Share on other sites More sharing options...
Mooney Posted August 31, 2022 Author Share #3 Posted August 31, 2022 41 minutes ago, rojoone2 said: Try to build a DS3622xs+ with the Adaptec aic94xx SAS/SATA driver. Install the controller and build using the following: ./rploader.sh clean ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh serialgen DS3622xs+ ./rploader.sh identifyusb ./rploader.sh satamap ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/aic94xx/rpext-index.json ./rploader.sh build broadwellnk-7.1.0-42661 Save your output (incase you have errors so that you can post it) then reboot Thanks for the fast answer, installation went without any issues, but the drives connected to the Adaptec are not visible still. Any advice? Quote Link to comment Share on other sites More sharing options...
Mooney Posted August 31, 2022 Author Share #4 Posted August 31, 2022 Do I have to create array in the Adaptec BIOS first for those HDDs to be usable? I thought I should not create RAID as AHCI should be the way to go. Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 31, 2022 Share #5 Posted August 31, 2022 AHCI is what you should use. DSM will create the RAID when you set up a volume. Is there a way to initialize the drives from the 6405 BIOS? Quote Link to comment Share on other sites More sharing options...
Mooney Posted August 31, 2022 Author Share #6 Posted August 31, 2022 9 minutes ago, rojoone2 said: AHCI is what you should use. DSM will create the RAID when you set up a volume. Is there a way to initialize the drives from the 6405 BIOS? Yeah it is...just not sure if I can leave them in Ahci...will test when back to computer Quote Link to comment Share on other sites More sharing options...
rojoone2 Posted August 31, 2022 Share #7 Posted August 31, 2022 You may want to have a look at this post. Its from 2017 but it may clear some things up for you about that card: Quote Link to comment Share on other sites More sharing options...
sbv3000 Posted September 2, 2022 Share #8 Posted September 2, 2022 https://github.com/pocopico/rp-ext/tree/main/aacraid add-on might work? Quote Link to comment Share on other sites More sharing options...
Mooney Posted September 3, 2022 Author Share #9 Posted September 3, 2022 19 hours ago, sbv3000 said: https://github.com/pocopico/rp-ext/tree/main/aacraid add-on might work? Great tip, worked well thanks. Just stay away from WD HDDs if working with ADAPTEC...JBOD works correctly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.