bdn171 Posted December 19, 2022 Share #126 Posted December 19, 2022 В 29.10.2022 в 22:55, sandercube сказал: Решение до сих пор не нашёл, уже перекопал куча забугорских форумов - безрезультатно. Пока мучаюсь так... По поводу плохой скорости по сети подключенных накопителей: Установил DSM 7 на proxmox + Мини-ПК GK3V, процессор n5105. (По скриптам из этой темы). Подключил ноутбучный HDD как каталог + зачем-то отформатировал его сначала в ext4. Получил тормоза при скачивании с этой папки по сети. Пере - подключил ноутбучный HDD как LVL-Thin. И специально никак не форматировал. После этого тормоза при скачивания с NAS пропали. Может кому-то поможет. У меня все заработало, Спасибо автору темы и сообществу Quote Link to comment Share on other sites More sharing options...
Железный дровосек Posted December 21, 2022 Share #127 Posted December 21, 2022 Друзья,не пойму где взять img file. тут не вижу такого https://github.com/pocopico/tinycore-redpill Quote Link to comment Share on other sites More sharing options...
bdn171 Posted December 21, 2022 Share #128 Posted December 21, 2022 (edited) 11 минуту назад, Железный дровосек сказал: Друзья,не пойму где взять img file. тут не вижу такого https://github.com/pocopico/tinycore-redpill нажмите на последний релиз справа. Edited December 21, 2022 by bdn171 1 Quote Link to comment Share on other sites More sharing options...
vanooname Posted December 21, 2022 Share #129 Posted December 21, 2022 Всем доброго времени суток! Сделал все по инструкции уже несколько виртуалок, попробовал несколько версий DS918+, и последнии версии для DS3622, DS3617 После перезагрузки IP-адрес не присваивается (на роутере не виден, прошлый IP-адрес не пингуется, сайт и утилита не находят устройств synology). Много чего перепробовал в плоть до изменения типа сетевого интерфейса в proxmox. Подскажите, какие варианты решения? Quote Link to comment Share on other sites More sharing options...
elwin80 Posted January 3, 2023 Share #130 Posted January 3, 2023 В 02.08.2022 в 21:12, mckormcik сказал: Бекап новой тачки на гугл диске https://drive.google.com/file/d/1nw-TGysHe47rAJukZI-SB61aSklSVNbw/view?usp=sharing за бекап РЕСПЕКТ! спасибо) Quote Link to comment Share on other sites More sharing options...
MuJIeXa Posted January 12, 2023 Share #131 Posted January 12, 2023 Нужна помощь! Делаю все по инструкции, при запуске билда , выдает ошибку. Куда копать подскажите Error : Platform not found rploader.sh Version : 0.9.4.0 -------------------------------------------------------------------------------- -------- Usage: ./rploader.sh <action> <platform version> <static or compile module> [ext ension manager arguments] Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, p atchdtc, satamap, backup, backuploader, restoreloader, restoresession, mountdsmroot, post update, mountshare, version, monitor, bringfriend, downloadupgradepat, help - build <platform> <option> : Build the 💊 RedPill LKM and update the loader image for the specified platfor m version and update current loader. Valid Options: static/compile/manual/junmod/withfriend ** withfriend add the TCRP friend and a boot option for auto patching - ext <platform> <option> <URL> Manage extensions using redpill extension manager. Valid Options: add/force_add/info/remove/update/cleanup/auto . Options after platform Example: rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/p ocopico/rp-ext/master/e1000/rpext-index.json or for auto detect use rploader.sh ext apollolake-7.0.1-42218 auto - download <platform> : Download redpill sources only - clean : Removes all cached and downloaded files and starts over clean - update : Checks github repo for latest version of rploader, and prompts you download an d overwrite - fullupgrade : Performs a full upgrade of the local files to the latest available on the repo . It will backup the current filed under /home/tc/old - listmods <platform>: Tries to figure out any required extensions. This usually are device modules - serialgen <synomodel> <option> : Generates a serial number and mac address for the following platforms DS3615xs DS3617xs DS916+ DS918+ DS920+ DS3622xs+ FS6400 DVA3219 DVA3221 DS1621 + DS923+ DVA1622 DS2422+ RS4021xs+ Valid Options : realmac , keeps the real mac of interface eth0 - identifyusb : Tries to identify your loader usb stick VID:PID and updates the user_config.js on file - patchdtc : Tries to identify and patch your dtc model for your disk and nvme devices. If you want to have your manually edited dts file used convert it to dtb and place it under /home/ tc/custom-modules - satamap : Tries to identify your SataPortMap and DiskIdxMap values and updates the user_ config.json file - backup : Backup and make changes /home/tc changed permanent to your loader disk. Next t ime you boot, your /home will be restored to the current state. - backuploader : Backup current loader partitions to your TCRP partition - restoreloader : Restore current loader partitions from your TCRP partition - restoresession : Restore last user session files. (extensions and user_config.json) - mountdsmroot : Mount DSM root for manual intervention on DSM root partition - postupdate : Runs a postupdate process to recreate your rd.gz, zImage and custom.gz for jun ior to match root - mountshare : Mounts a remote CIFS working directory - version <option>: Prints rploader version and if the history option is passed then the version h istory is listed. Valid Options : history, shows rploader release history. - monitor : Prints system statistics related to TCRP loader - getgrubconf : Checks your user_config.json file variables against current grub.cfg variables and updates your user_config.json accordingly - bringfriend Downloads TCRP friend and makes it the default boot option. TCRP Friend is her e to assist with automated patching after an upgrade. No postupgrade actions will be required a nymore, if TCRP friend is left as the default boot option. - downloadupgradepat Downloads a specific upgade pat that can be used for various troubleshooting p urposes - removefriend Reverse bringfriend actions and remove TCRP from your loader - help: Show this page -------------------------------------------------------------------------------- -------- Quote Link to comment Share on other sites More sharing options...
IlyhaSV Posted January 13, 2023 Share #132 Posted January 13, 2023 В 11.08.2022 в 21:17, Joyz сказал: А что мешает сгенерировать s/n и mac утилитой и сразу же установить с 7.1 ? Кстати, чтобы заработал quick connect надо использовать реально существующую связку s/n + mac Вот был бы благодарен с подсознанием как подкинуть в Proxmox свой серийник. Quote Link to comment Share on other sites More sharing options...
IlyhaSV Posted January 13, 2023 Share #133 Posted January 13, 2023 23 часа назад, MuJIeXa сказал: Нужна помощь! Делаю все по инструкции, при запуске билда , выдает ошибку. Куда копать подскажите Error : Platform not found rploader.sh Version : 0.9.4.0 -------------------------------------------------------------------------------- -------- Usage: ./rploader.sh <action> <platform version> <static or compile module> [ext ension manager arguments] Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, p atchdtc, satamap, backup, backuploader, restoreloader, restoresession, mountdsmroot, post update, mountshare, version, monitor, bringfriend, downloadupgradepat, help - build <platform> <option> : Build the 💊 RedPill LKM and update the loader image for the specified platfor m version and update current loader. Valid Options: static/compile/manual/junmod/withfriend ** withfriend add the TCRP friend and a boot option for auto patching - ext <platform> <option> <URL> Manage extensions using redpill extension manager. Valid Options: add/force_add/info/remove/update/cleanup/auto . Options after platform Example: rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/p ocopico/rp-ext/master/e1000/rpext-index.json or for auto detect use rploader.sh ext apollolake-7.0.1-42218 auto - download <platform> : Download redpill sources only - clean : Removes all cached and downloaded files and starts over clean - update : Checks github repo for latest version of rploader, and prompts you download an d overwrite - fullupgrade : Performs a full upgrade of the local files to the latest available on the repo . It will backup the current filed under /home/tc/old - listmods <platform>: Tries to figure out any required extensions. This usually are device modules - serialgen <synomodel> <option> : Generates a serial number and mac address for the following platforms DS3615xs DS3617xs DS916+ DS918+ DS920+ DS3622xs+ FS6400 DVA3219 DVA3221 DS1621 + DS923+ DVA1622 DS2422+ RS4021xs+ Valid Options : realmac , keeps the real mac of interface eth0 - identifyusb : Tries to identify your loader usb stick VID:PID and updates the user_config.js on file - patchdtc : Tries to identify and patch your dtc model for your disk and nvme devices. If you want to have your manually edited dts file used convert it to dtb and place it under /home/ tc/custom-modules - satamap : Tries to identify your SataPortMap and DiskIdxMap values and updates the user_ config.json file - backup : Backup and make changes /home/tc changed permanent to your loader disk. Next t ime you boot, your /home will be restored to the current state. - backuploader : Backup current loader partitions to your TCRP partition - restoreloader : Restore current loader partitions from your TCRP partition - restoresession : Restore last user session files. (extensions and user_config.json) - mountdsmroot : Mount DSM root for manual intervention on DSM root partition - postupdate : Runs a postupdate process to recreate your rd.gz, zImage and custom.gz for jun ior to match root - mountshare : Mounts a remote CIFS working directory - version <option>: Prints rploader version and if the history option is passed then the version h istory is listed. Valid Options : history, shows rploader release history. - monitor : Prints system statistics related to TCRP loader - getgrubconf : Checks your user_config.json file variables against current grub.cfg variables and updates your user_config.json accordingly - bringfriend Downloads TCRP friend and makes it the default boot option. TCRP Friend is her e to assist with automated patching after an upgrade. No postupgrade actions will be required a nymore, if TCRP friend is left as the default boot option. - downloadupgradepat Downloads a specific upgade pat that can be used for various troubleshooting p urposes - removefriend Reverse bringfriend actions and remove TCRP from your loader - help: Show this page -------------------------------------------------------------------------------- -------- Попробуй это, думаю что все заработает. Quote Link to comment Share on other sites More sharing options...
nsanok98 Posted January 14, 2023 Share #134 Posted January 14, 2023 При создании виртуалки по скрипту идет создание загрузочного ssd на 50 гб (ограничил 5гб), можно ли его как-то убрать, чтобы не было видно в системе? Quote Link to comment Share on other sites More sharing options...
sergy Posted February 24, 2023 Share #135 Posted February 24, 2023 В 02.08.2022 в 20:12, mckormcik сказал: На HP Microserver G8, Proxmox 7.1.7 Установил так: DS3622xs+ - архитектура DSM 7.1-42661 Update 1 результат Отсюда скачал https://github.com/pocopico/tinycore-redpill/tree/develop https://github.com/pocopico/tinycore-redpill/blob/develop/tinycore-redpill.v0.9.0.2.img.gz После сделал VM с 32gb диском, залил на сервер образ. Сделал импорт образа в диск командой: qm importdisk 100 /root/tinycore-redpill.v0.9.0.2.img local-lvm Не забываем добавить к вм консольный интерфейс qm set 100 -serial0 socket Запускаем вм, установив приоритет загрузки с нового 1G диска и диски должны быть SATA в свойствах машины. Загружаем tinycore. Подключаемся по ssh или как удобнее. Команды по очереди, когда спрашивает тыкаем Y как ответ. ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3622xs+ ./rploader.sh satamap now ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/redpill-load/master/redpill-virtio/rpext-index.json ./rploader.sh ext broadwellnk-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/redpill-load/develop/redpill-acpid/rpext-index.json Редактируем конфиг, вносим инфу о сетевом интерфейсе. Копируем мак и заменяем после в свойствах вм. edit user_config.json "SataPortMap": "4" "DiskIdxMap": "00" "netif_num": "1" ./rploader.sh build broadwellnk-7.1.0-42661 После exec sudo reboot. Загружаемся с sata интерфейса. Бекап новой тачки на гугл диске https://drive.google.com/file/d/1nw-TGysHe47rAJukZI-SB61aSklSVNbw/view?usp=sharing на момент 24 февраля 2023 года пробовал развернутый дамп - тот же мак адрес, симитировал диски SCSI как на картинке по 30 гб, выгружаю с оф сайта синолоджи версию прошивки 7.1-42661 (with Update 1) https://archive.synology.com/download/Os/DSM/7.1-42661-1-NanoPacked https://global.synologydownload.com/download/DSM/release/7.1/42661-1/DSM_DS3622xs%2B_42661.pat - сама прошивка примерно на 60+ процентах ругается, что файл пакета поврежден. Если у тебя старая версия пакета осталась поделись плиз. на форуме читал, что производитель обновил пакеты и теперь проблема с накаткой 7.1 и 7.0 версий. Не могу бы ты старую версию пакеты 7.1 выложить ? если она у тебя осталась конечно у меня proxmox 7.3.6 на материнке J3355 Quote Link to comment Share on other sites More sharing options...
sergy Posted February 24, 2023 Share #136 Posted February 24, 2023 В 13.01.2023 в 00:47, MuJIeXa сказал: Нужна помощь! Делаю все по инструкции, при запуске билда , выдает ошибку. Куда копать подскажите Error : Platform not found rploader.sh Version : 0.9.4.0 -------------------------------------------------------------------------------- -------- Usage: ./rploader.sh <action> <platform version> <static or compile module> [ext ension manager arguments] Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, p atchdtc, satamap, backup, backuploader, restoreloader, restoresession, mountdsmroot, post update, mountshare, version, monitor, bringfriend, downloadupgradepat, help - build <platform> <option> : Build the 💊 RedPill LKM and update the loader image for the specified platfor m version and update current loader. Valid Options: static/compile/manual/junmod/withfriend ** withfriend add the TCRP friend and a boot option for auto patching - ext <platform> <option> <URL> Manage extensions using redpill extension manager. Valid Options: add/force_add/info/remove/update/cleanup/auto . Options after platform Example: rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/p ocopico/rp-ext/master/e1000/rpext-index.json or for auto detect use rploader.sh ext apollolake-7.0.1-42218 auto - download <platform> : Download redpill sources only - clean : Removes all cached and downloaded files and starts over clean - update : Checks github repo for latest version of rploader, and prompts you download an d overwrite - fullupgrade : Performs a full upgrade of the local files to the latest available on the repo . It will backup the current filed under /home/tc/old - listmods <platform>: Tries to figure out any required extensions. This usually are device modules - serialgen <synomodel> <option> : Generates a serial number and mac address for the following platforms DS3615xs DS3617xs DS916+ DS918+ DS920+ DS3622xs+ FS6400 DVA3219 DVA3221 DS1621 + DS923+ DVA1622 DS2422+ RS4021xs+ Valid Options : realmac , keeps the real mac of interface eth0 - identifyusb : Tries to identify your loader usb stick VID:PID and updates the user_config.js on file - patchdtc : Tries to identify and patch your dtc model for your disk and nvme devices. If you want to have your manually edited dts file used convert it to dtb and place it under /home/ tc/custom-modules - satamap : Tries to identify your SataPortMap and DiskIdxMap values and updates the user_ config.json file - backup : Backup and make changes /home/tc changed permanent to your loader disk. Next t ime you boot, your /home will be restored to the current state. - backuploader : Backup current loader partitions to your TCRP partition - restoreloader : Restore current loader partitions from your TCRP partition - restoresession : Restore last user session files. (extensions and user_config.json) - mountdsmroot : Mount DSM root for manual intervention on DSM root partition - postupdate : Runs a postupdate process to recreate your rd.gz, zImage and custom.gz for jun ior to match root - mountshare : Mounts a remote CIFS working directory - version <option>: Prints rploader version and if the history option is passed then the version h istory is listed. Valid Options : history, shows rploader release history. - monitor : Prints system statistics related to TCRP loader - getgrubconf : Checks your user_config.json file variables against current grub.cfg variables and updates your user_config.json accordingly - bringfriend Downloads TCRP friend and makes it the default boot option. TCRP Friend is her e to assist with automated patching after an upgrade. No postupgrade actions will be required a nymore, if TCRP friend is left as the default boot option. - downloadupgradepat Downloads a specific upgade pat that can be used for various troubleshooting p urposes - removefriend Reverse bringfriend actions and remove TCRP from your loader - help: Show this page -------------------------------------------------------------------------------- -------- сейчас на 9 версии красной пилюли название сменились. названия валидные можно узнать вызвав команду ./rploader.sh build теперь там названия версий синолоджи фигурируют. точно уже не помню, примерно так ./rploader.sh build выведется список моделей и версий потом коипруешь версию и примерно так выглядит: ./rploader.sh build ds3622xs_42661 но на данный момент у меня ошибка по чексумам происходит. Quote Link to comment Share on other sites More sharing options...
mihrutkin Posted March 12, 2023 Share #137 Posted March 12, 2023 Господа, а никто на GK3 Pro GK3 Plus процессор Intel N5105 не ставил еще? https://aliexpress.ru/item/1005001269827703.html?sku_id=12000029866589362&spm=a2g2w.productlist.search_results.2.27f04aa6mqUuo8 Quote Link to comment Share on other sites More sharing options...
boyscout123 Posted March 12, 2023 Share #138 Posted March 12, 2023 Столкнулся с разными проблемами. 1. Я воспользовался скриптом, поправил имя файла. В итоге он так и не смог распаковать архив. такую и выдал ошибку. Ладно я убрал закачку и указал путь до файла, что загрузил в proxmox. 2. Я выполнил команду "./rploader.sh serialgen DS918+ now" но в самом файле устройство не меняется. Если я указываю именно ту модель в файле, то он серийники генерирует успешно. Я в принципе решил использовать именно то устройство что в файле. 3. В итоге все прошло успешно и после ребута когда я выбираю usb, он дальше booting the kernel не идет. так и висит. Пробовал по инструкции все сделать по новой. Но в итоге сталкиваюсь все с загрузкой кернела. Quote Link to comment Share on other sites More sharing options...
msmi Posted April 16, 2023 Share #139 Posted April 16, 2023 Всё останавливается тоже ровно на том же месте "booting the kernel". Получилось установить по способу от Palintin (в списке тем)...там и загрузчик другой. Quote Link to comment Share on other sites More sharing options...
Archimarsedes Posted June 3, 2023 Share #140 Posted June 3, 2023 Всем привет еле поставил на Proxmox эту софтину поделюсь опытом. Ставил на билинк n5101. В prox mox вставляем этот скрипт в консоль. # set vm id id=200 # create disk for sata0 pvesm alloc local-lvm ${id} vm-${id}-disk-0 20G # create image directory, download and uncomporess mkdir -p /var/lib/vz/images/${id} curl --location https://github.com/pocopico/tinycore-redpill/releases/download/v0.9.4.8/tinycore-redpill.v0.9.4.8.img.gz --output /var/lib/vz/images/${id}/tinycore-redpill.v0.9.4.8.img.gz gzip --decompress /var/lib/vz/images/${id}/tinycore-redpill.v0.9.4.8.img.gz --keep # create vm qm create ${id} \ --args "-drive 'if=none,id=synoboot,format=raw,file=/var/lib/vz/images/${id}/tinycore-redpill.v0.9.4.8.img' -device 'qemu-xhci,addr=0x18' -device 'usb-storage,drive=synoboot,bootindex=5'" \ --cores 2 \ --cpu host \ --machine q35 \ --memory 2048 \ --name DSM \ --net0 virtio,bridge=vmbr0 \ --numa 0 \ --onboot 0 \ --ostype l26 \ --scsihw virtio-scsi-pci \ --sata0 local-lvm:vm-${id}-disk-0,discard=on,size=20G,ssd=1 \ --sockets 1 \ --serial0 socket \ --serial1 socket \ --tablet 1 После установки запускаем новую машину и смотрим IP Запускаем Putty вводим IP и подключаемся. Логин tc Пароль P@ssword Далее вводим команды ниже. скрипт для установки. ./rploader.sh update now ./rploader.sh fuullupdate now ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh serialgen DS3615xs ./rploader.sh build ds3615xs-7.1.1-42962 exitchek.sh reboot После этого добавляем в виртуальной машине жесткий диск. Запускаем виртуалку. Выбираем загрузиться с usb!!! Далее заходим на сайт https://finds.synology.com/ смотрим ip синолоджи. Заходим на него и проходим все настройки. Готово!!! Короче убил пол дня на кучу инструкций, вот решил поделиться с вами!!!! Quote Link to comment Share on other sites More sharing options...
sahadjialexandr Posted June 8, 2023 Share #141 Posted June 8, 2023 В 03.06.2023 в 16:48, Archimarsedes сказал: Всем привет еле поставил на Proxmox эту софтину поделюсь опытом. Ставил на билинк n5101. В prox mox вставляем этот скрипт в консоль. # set vm id id=200 # create disk for sata0 pvesm alloc local-lvm ${id} vm-${id}-disk-0 20G # create image directory, download and uncomporess mkdir -p /var/lib/vz/images/${id} curl --location https://github.com/pocopico/tinycore-redpill/releases/download/v0.9.4.8/tinycore-redpill.v0.9.4.8.img.gz --output /var/lib/vz/images/${id}/tinycore-redpill.v0.9.4.8.img.gz gzip --decompress /var/lib/vz/images/${id}/tinycore-redpill.v0.9.4.8.img.gz --keep # create vm qm create ${id} \ --args "-drive 'if=none,id=synoboot,format=raw,file=/var/lib/vz/images/${id}/tinycore-redpill.v0.9.4.8.img' -device 'qemu-xhci,addr=0x18' -device 'usb-storage,drive=synoboot,bootindex=5'" \ --cores 2 \ --cpu host \ --machine q35 \ --memory 2048 \ --name DSM \ --net0 virtio,bridge=vmbr0 \ --numa 0 \ --onboot 0 \ --ostype l26 \ --scsihw virtio-scsi-pci \ --sata0 local-lvm:vm-${id}-disk-0,discard=on,size=20G,ssd=1 \ --sockets 1 \ --serial0 socket \ --serial1 socket \ --tablet 1 После установки запускаем новую машину и смотрим IP Запускаем Putty вводим IP и подключаемся. Логин tc Пароль P@ssword Далее вводим команды ниже. скрипт для установки. ./rploader.sh update now ./rploader.sh fuullupdate now ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh serialgen DS3615xs ./rploader.sh build ds3615xs-7.1.1-42962 exitchek.sh reboot После этого добавляем в виртуальной машине жесткий диск. Запускаем виртуалку. Выбираем загрузиться с usb!!! Далее заходим на сайт https://finds.synology.com/ смотрим ip синолоджи. Заходим на него и проходим все настройки. Готово!!! Короче убил пол дня на кучу инструкций, вот решил поделиться с вами!!!! ввожу пароль почему то не заходит( подскажите в чем может быть причина Quote Link to comment Share on other sites More sharing options...
asustek Posted June 14, 2023 Share #142 Posted June 14, 2023 Логин tc Пароль P@ssw0rd Quote Link to comment Share on other sites More sharing options...
sahadjialexandr Posted June 17, 2023 Share #143 Posted June 17, 2023 В 14.06.2023 в 13:50, asustek сказал: Логин tc Пароль P@ssw0rd зашел только после установки Quote Link to comment Share on other sites More sharing options...
sahadjialexandr Posted June 17, 2023 Share #144 Posted June 17, 2023 В 14.06.2023 в 13:50, asustek сказал: Логин tc Пароль P@ssw0rd теперь другая проблема когда вбиваю по очереди эти коды то пишет нет доступа в интернет как обеспечить выход в инет ? ./rploader.sh update now ./rploader.sh fuullupdate now ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh serialgen DS3615xs ./rploader.sh build ds3615xs-7.1.1-42962 exitchek.sh reboot Quote Link to comment Share on other sites More sharing options...
sahadjialexandr Posted June 17, 2023 Share #145 Posted June 17, 2023 8 минут назад, sahadjialexandr сказал: теперь другая проблема когда вбиваю по очереди эти коды то пишет нет доступа в интернет как обеспечить выход в инет ? ./rploader.sh update now ./rploader.sh fuullupdate now ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh serialgen DS3615xs ./rploader.sh build ds3615xs-7.1.1-42962 exitchek.sh reboot нашел решени проблемы в консоле есть правка настроек там есть вкладка нетворк там выставил dhcp после появился интернет и все заработало Quote Link to comment Share on other sites More sharing options...
sahadjialexandr Posted June 17, 2023 Share #146 Posted June 17, 2023 В 03.06.2023 в 16:48, Archimarsedes сказал: Всем привет еле поставил на Proxmox эту софтину поделюсь опытом. Ставил на билинк n5101. В prox mox вставляем этот скрипт в консоль. # set vm id id=200 # create disk for sata0 pvesm alloc local-lvm ${id} vm-${id}-disk-0 20G # create image directory, download and uncomporess mkdir -p /var/lib/vz/images/${id} curl --location https://github.com/pocopico/tinycore-redpill/releases/download/v0.9.4.8/tinycore-redpill.v0.9.4.8.img.gz --output /var/lib/vz/images/${id}/tinycore-redpill.v0.9.4.8.img.gz gzip --decompress /var/lib/vz/images/${id}/tinycore-redpill.v0.9.4.8.img.gz --keep # create vm qm create ${id} \ --args "-drive 'if=none,id=synoboot,format=raw,file=/var/lib/vz/images/${id}/tinycore-redpill.v0.9.4.8.img' -device 'qemu-xhci,addr=0x18' -device 'usb-storage,drive=synoboot,bootindex=5'" \ --cores 2 \ --cpu host \ --machine q35 \ --memory 2048 \ --name DSM \ --net0 virtio,bridge=vmbr0 \ --numa 0 \ --onboot 0 \ --ostype l26 \ --scsihw virtio-scsi-pci \ --sata0 local-lvm:vm-${id}-disk-0,discard=on,size=20G,ssd=1 \ --sockets 1 \ --serial0 socket \ --serial1 socket \ --tablet 1 После установки запускаем новую машину и смотрим IP Запускаем Putty вводим IP и подключаемся. Логин tc Пароль P@ssword Далее вводим команды ниже. скрипт для установки. ./rploader.sh update now ./rploader.sh fuullupdate now ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh serialgen DS3615xs ./rploader.sh build ds3615xs-7.1.1-42962 exitchek.sh reboot После этого добавляем в виртуальной машине жесткий диск. Запускаем виртуалку. Выбираем загрузиться с usb!!! Далее заходим на сайт https://finds.synology.com/ смотрим ip синолоджи. Заходим на него и проходим все настройки. Готово!!! Короче убил пол дня на кучу инструкций, вот решил поделиться с вами!!!! захожу на сайт или скачал саму программу синоложи не находит ни один сервер соответственно не могу зайти в вэб морду не знаю как быть вроде все сделал правильно Quote Link to comment Share on other sites More sharing options...
i926 Posted June 18, 2023 Share #147 Posted June 18, 2023 Какой то Спамщик, все темы забил своей хренью ..... 1 Quote Link to comment Share on other sites More sharing options...
dj_nsk Posted June 18, 2023 Share #148 Posted June 18, 2023 2 часа назад, i926 сказал: Какой то Спамщик, все темы забил своей хренью ..... он не просто спамер - там вирусы Quote Link to comment Share on other sites More sharing options...
i926 Posted June 18, 2023 Share #149 Posted June 18, 2023 (edited) 41 минуту назад, dj_nsk сказал: он не просто спамер - там вирусы Он их ещё и упаковал через ...опу ))) Edited June 18, 2023 by i926 Quote Link to comment Share on other sites More sharing options...
sahadjialexandr Posted June 22, 2023 Share #150 Posted June 22, 2023 если кто будет ставить для этого устройства брал тут https://aliexpress.ru/item/1005005078926791.html?spm=a2g2w.orderdetail.0.0.66814aa6MKT5Jv&sku_id=12000031557917943 то сработало таким образом # set vm id id=200 # create disk for sata0 pvesm alloc local-lvm ${id} vm-${id}-disk-0 50G # create image directory, download and uncomporess mkdir -p /var/lib/vz/images/${id} curl --location https://github.com/pocopico/tinycore-redpill/releases/download/v0.9.4.9/tinycore-redpill.v0.9.4.9.img.gz --output /var/lib/vz/images/${id}/tinycore-redpill.v0.9.4.9.img.gz gzip --decompress /var/lib/vz/images/${id}/tinycore-redpill.v0.9.4.9.img.gz --keep # create vm qm create ${id} \ --args "-drive 'if=none,id=synoboot,format=raw,file=/var/lib/vz/images/${id}/tinycore-redpill.v0.9.4.9.img' -device 'qemu-xhci,addr=0x18' -device 'usb-storage,drive=synoboot,bootindex=5'" \ --cores 2 \ --cpu host \ --machine q35 \ --memory 2048 \ --name DSM \ --net0 e1000,bridge=vmbr0 \ --numa 0 \ --onboot 0 \ --ostype l26 \ --scsihw virtio-scsi-pci \ --sata0 local-lvm:vm-${id}-disk-0,discard=on,size=50G,ssd=1 \ --sockets 1 \ --serial0 socket \ --serial1 socket \ --tablet 1 Необязательно к выполнению: ./rploader.sh update now ./rploader.sh satamap now Обязательно к выполнению. ./rploader.sh identifyusb now ./rploader.sh serialgen DS3622xs+ ./rploader.sh build ds3622xsp-7.1.1-42962 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.