Lprawita Posted July 13, 2013 Share #1 Posted July 13, 2013 I have a new problem now. I have 6 units of 4TB Seagate HDD and I installed 4 units in the beginning and I added 2 more. Obviously the Syno detected more HDD and asked me to expand. When I clicked Expand, it would start from 0.00% and stopped without even going further to 0.01% Please help. Should I destroy the whole volume and start from the beginning? What if I wanna add more drives in the future? Does the "EXPAND" feature really work? Link to comment Share on other sites More sharing options...
stanza Posted July 19, 2013 Share #2 Posted July 19, 2013 Yes the expand feature works fine THO I had several troubles with a couple of installs (different computers.... Due to bad HDD's I would be suspicious of a bad HDD you might have You can try and fix it yourself if you like... I used this guide to fix mine http://www.mauchle.name/blog/?p=235 Tho the expansion worked... it didn't take long for some error messages to appear that a drive was failing and NOT passing smart tests (2TB WD Grean Drive) Once I swapped that drive out for another... everthing went fine But like I said, it sounds like you have a bad HDD to me if it's failing Link to comment Share on other sites More sharing options...
Recommended Posts