Recommended Posts

Здравствуйте

 

Собран был давно уже NAS на стареньком компьютере (материнка GA-MA78GM-S2H + 8Gb память + 5 HDD по 1Tb)

DSM 6.2.3-25426 Update 3

JUN'S LOADER v1.03b - DS3615xs

ip 192.168.2.10

Скрытый текст

dmidecode -t 2
# dmidecode 3.2
Scanning /dev/mem for entry point.
SMBIOS 2.4 present.

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
        Manufacturer: Gigabyte Technology Co., Ltd.
        Product Name: GA-MA78GM-US2H
        Version: x.x
        Serial Number:

 

 

 cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 107
model name      : AMD Athlon(tm) Dual Core Processor 4850e
stepping        : 2
cpu MHz         : 2511.392
cache size      : 512 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow nopl pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch lbrv
bogomips        : 5022.78
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc 100mhzsteps

processor       : 1
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 107
model name      : AMD Athlon(tm) Dual Core Processor 4850e
stepping        : 2
cpu MHz         : 2511.392
cache size      : 512 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow nopl pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch lbrv
bogomips        : 5022.85
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc 100mhzsteps

 

 

Используется как торрентокачалка и с неё потом через Kodi на Nvidia Shield фильмы смотрю.

 

Давно уже не смотрел 4K файлы - обычно сериалы в 1080p и тут решил посмотреть в 4К фильмы скачанные на NAS давно.

И тут вижу, что Kodi постоянно буферизует так, что нельзя смотреть нормально.

 

Раньше всё было нормально.

 

Собрал еще один NAS -из кладовки  взяв еще старый комп на материнке A75F-M2

Воткнул туда один HDD + 4gb память. Версия загрузчика и DSM те же самые.

192.168.2.12

Скрытый текст

dmidecode -t 2
# dmidecode 3.2
Scanning /dev/mem for entry point.
SMBIOS 2.7 present.

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
        Manufacturer: ECS
        Product Name: A75F-M2
        Version: 1.0
        Serial Number:
        Asset Tag: To be filled by O.E.M.
        Features:
                Board is a hosting board
                Board is replaceable
        Location In Chassis: To be filled by O.E.M.
        Chassis Handle: 0x0003
        Type: Motherboard
        Contained Object Handles: 0

 

 

cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 18
model           : 1
model name      : AMD A8-3850 APU with Radeon(tm) HD Graphics
stepping        : 0
cpu MHz         : 2900.000
cache size      : 1024 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 6
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov                                                                                                                                                              pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp                                                                                                                                                              lm 3dnowext 3dnow nopl aperfmperf pni monitor cx16 popcnt lahf_lm cmp_legacy sv                                                                                                                                                             m extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_                                                                                                                                                             pstate npt lbrv svm_lock nrip_save pausefilter
bogomips        : 5789.40
TLB size        : 1536 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

 

Поставил IPERF на оба NAS-a. Подключено в один гигабитный роутер Zyxel Keenetic

 

С нового NAS на старый

на новом

iperf3 -c 192.168.2.10
Connecting to host 192.168.2.10, port 5201
[  5] local 192.168.2.12 port 59065 connected to 192.168.2.10 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   112 MBytes   941 Mbits/sec    0    436 KBytes
[  5]   1.00-2.00   sec   112 MBytes   936 Mbits/sec    0    451 KBytes
[  5]   2.00-3.00   sec   111 MBytes   935 Mbits/sec    0    460 KBytes
[  5]   3.00-4.00   sec   112 MBytes   936 Mbits/sec    0    481 KBytes
[  5]   4.00-5.00   sec   111 MBytes   931 Mbits/sec    0    495 KBytes
[  5]   5.00-6.00   sec   112 MBytes   936 Mbits/sec    0    505 KBytes
[  5]   6.00-7.00   sec   111 MBytes   930 Mbits/sec    0    518 KBytes
[  5]   7.00-8.00   sec   111 MBytes   935 Mbits/sec    0    523 KBytes
[  5]   8.00-9.00   sec   111 MBytes   932 Mbits/sec    0    525 KBytes
[  5]   9.00-10.00  sec   112 MBytes   937 Mbits/sec    0    529 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.09 GBytes   935 Mbits/sec    0             sender
[  5]   0.00-10.03  sec  1.09 GBytes   932 Mbits/sec                  receiver

 

на старом

Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.2.12, port 59064
[  5] local 192.168.2.10 port 5201 connected to 192.168.2.12 port 59065
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec   109 MBytes   911 Mbits/sec
[  5]   1.00-2.00   sec   112 MBytes   936 Mbits/sec
[  5]   2.00-3.00   sec   111 MBytes   935 Mbits/sec
[  5]   3.00-4.00   sec   111 MBytes   934 Mbits/sec
[  5]   4.00-5.00   sec   111 MBytes   933 Mbits/sec
[  5]   5.00-6.00   sec   111 MBytes   932 Mbits/sec
[  5]   6.00-7.00   sec   111 MBytes   933 Mbits/sec
[  5]   7.00-8.00   sec   111 MBytes   934 Mbits/sec
[  5]   8.00-9.00   sec   111 MBytes   933 Mbits/sec
[  5]   9.00-10.00  sec   111 MBytes   934 Mbits/sec
[  5]  10.00-10.03  sec  2.89 MBytes   934 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.03  sec  1.09 GBytes   932 Mbits/sec                  receiver
-----------------------------------------------------------

 

 

Меняем местами iperf сервер и клиент

А вот с старого на новый:

iperf3 -c 192.168.2.12
Connecting to host 192.168.2.12, port 5201
[  5] local 192.168.2.10 port 48420 connected to 192.168.2.12 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  12.3 MBytes   103 Mbits/sec  1673   2.83 KBytes
[  5]   1.00-2.00   sec  12.4 MBytes   104 Mbits/sec  1705   4.24 KBytes
[  5]   2.00-3.00   sec  12.2 MBytes   102 Mbits/sec  1689   2.83 KBytes
[  5]   3.00-4.00   sec  12.5 MBytes   105 Mbits/sec  1705   4.24 KBytes
[  5]   4.00-5.00   sec  12.4 MBytes   104 Mbits/sec  1688   4.24 KBytes
[  5]   5.00-6.00   sec  12.5 MBytes   104 Mbits/sec  1696   4.24 KBytes
[  5]   6.00-7.00   sec  12.4 MBytes   104 Mbits/sec  1676   4.24 KBytes
[  5]   7.00-8.00   sec  12.5 MBytes   105 Mbits/sec  1684   2.83 KBytes
[  5]   8.00-9.00   sec  12.4 MBytes   104 Mbits/sec  1696   4.24 KBytes
[  5]   9.00-10.00  sec  12.4 MBytes   104 Mbits/sec  1691   2.83 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec   124 MBytes   104 Mbits/sec  16903             sender
[  5]   0.00-10.03  sec   124 MBytes   104 Mbits/sec                  receiver

 

 iperf3 -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.2.10, port 48419
[  5] local 192.168.2.12 port 5201 connected to 192.168.2.10 port 48420
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  11.9 MBytes  99.6 Mbits/sec
[  5]   1.00-2.00   sec  12.5 MBytes   105 Mbits/sec
[  5]   2.00-3.00   sec  12.2 MBytes   102 Mbits/sec
[  5]   3.00-4.00   sec  12.5 MBytes   105 Mbits/sec
[  5]   4.00-5.00   sec  12.4 MBytes   104 Mbits/sec
[  5]   5.00-6.00   sec  12.4 MBytes   104 Mbits/sec
[  5]   6.00-7.00   sec  12.4 MBytes   104 Mbits/sec
[  5]   7.00-8.00   sec  12.5 MBytes   105 Mbits/sec
[  5]   8.00-9.00   sec  12.4 MBytes   104 Mbits/sec
[  5]   9.00-10.00  sec  12.4 MBytes   104 Mbits/sec
[  5]  10.00-10.03  sec   359 KBytes   100 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.03  sec   124 MBytes   104 Mbits/sec                  receiver

 

В чем причина может быть, что столько ошибок?

Кабели не самодельные, а которые шли с роутером в комплекте - длина 50 см

NAS-ы стоят на одной полке с роутером.

Подключено на 1Gb покаызывает.

 

Edited by bigbrother72
Link to post
Share on other sites
  • 4 weeks later...
В 29.04.2021 в 14:09, bigbrother72 сказал:

В чем причина может быть, что столько ошибок?

как вариант сам роутер - пробовать подключить через простенький 5 портовый гигабитный свитч. Насы в свитч и свитч в роутер.

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.