Rusty
-
Posts
78 -
Joined
-
Last visited
Posts posted by Rusty
-
-
Been on it for a couple of days, all good so far.
-
Bare metal Microserver Gen8, was on 6.1, thought I'd update to 6.1.1 for laughs.
Did not boot afterwards, no matter; I've got recovering my config down to a fine art these days!
-
I am currently on esxi 6.0 and xpenology as a vm within it. I too suffer the high fan speed issue where ambient temp is 27c and fan spins no lower than 35% when idle. None of those reported success with the modded hp-ams mentioned they are on esxi 6.0 or baremetal, I assume they are on baremetal. Can someone advise will this hp-ams mod work for esxi 6.0? If it is esxi 6.0 that I am on, does it matter which modded version I choose? thanks
You need AMS for ESXi, not XPEnology. If you used the HPE custom ESXi ISO, you should already have it.
If not grab the HPE offline bundle and install that.
-
APIPA
-
Works like a charm, and I can see all four drives.
-
Yes go ahead and update, just did it to mine.
-
Hey!
I found out that after doing an Factory Reset, the Error would be gone. Haven't seen it since then. But it seems like my favorite Apps aren't updated to 6.1 yet Need an Usenet Downloader, something like SABnbzD or NZBget. Anyone an idea if there's a similar software?
As i've seen yet, no SABnzbd, no Midnight Commander.. :/
Add the SynoCommunity repo to the package manager.
-
6.x is not supported on Hyper-V as yet, so no recommendation to make.
-
I connect to my Gen8 with iLO VSP (iLO Virtual Serial Port)
Do you have any info on getting that to work? I tried it the other day and failed, so assumed it wasn't supported by XPE.
-
SOLVED!
1. During installing the usb loader went corrupted (tried twice). So after install you had to clean the usb drive(all partition) and reflash image.
2. Upgrade not work. so the only working route is to choose clean install (data folder are not deleted, you only have to rejoin domain or recreate user and assign permission. App are lost instead)
Your apps are only not installed, all your data is still there, if you backup the @appstore folder before you reinstall your apps, you can copy back the var folder to retain settings.
-
Boot into force install and do a non-migration install. You'll lose your settings but your data will be fine.
-
"Clean" install went fine. As nothing is deleted you can copy the /volume1/@appstore/*/var directory from your apps somewhere and restore it back.
Slower than an upgrade, but not difficult by any stretch.
-
No good for me upgrading either. HP Gen8 Microserver... boots up, lots of drive activity, no network though.
Guess I'll try the clean install, it doesn't hurt the data anyway.
-
I've got a broken network config, DSM is completely inaccessible. On older versions this wouldn't be a big deal as you can access the console locally to make repairs.
Can't do that on the 6.0 loader.
Mounting the drives in Ubuntu only gives access to /volume1 so can't fix it there. Force reinstall keeps the broken settings.
On a proper Syno unit you can reset them without losing any data, is there a way to do that on XPE at all?
-
I have a minor issue, when I reboot XPE a small customisation is lost; a change to /etc/passwd
Until I modify it, a few packages wedding launch (as I changed the user they run as).
Any idea what's causing it, or is it just a DSM6 thing, as it was fine on previous versions.
-
My HP Microserver Gen8 is in Migrate loop any help?
Regards
Igor
Did you update grub.conf with your USB sticks PID/VID?
-
Got my Gen8 upgraded. Seems there is now a built in apps group which ruined my custom one so some packages wouldn't run without some changes.
It causes a bit of odd behaviour in that after a short period of running iLO will crash and the fans will ramp up. This is only temporary as it recovers after a while.
-
For PPTP (spit) see if the router has a GRE option.
-
Thanks
I wish it was vm version 9; it is version 12 and can't use it on my esxi 6.0
SSH in and edit the version in the .vmx file.
-
You don't need VT-d for RDM.
-
Multiple vmdk on top of an existing array is a massive waste of time. Either use one huge vmdk and let the hardware handle the redundancy, or pass the physical disks through and let DSM do it.
-
-
Teaming won't give you more speed between two devices. That's not how it works.
-
Hyper-V will work in the same way too.
DSM 6.1.1-15101
in Readers News & Rumours
Posted
Copy the directory /volume1/@appstore to someplace else.
Reinstall your apps, but do not start them.
Copy back the original @appstore.
Start the apps.
Everything app-wise should be as it was before the reinstall.