Jump to content
XPEnology Community

shinrei82

Member
  • Posts

    27
  • Joined

  • Last visited

Everything posted by shinrei82

  1. Hi, there is no obvious question It did not boot from another disk because i did not touch it. Furthermore, when unattach the new disk it starts nicely again. Anyway, I plug the new disk to my laptop. Have a look and put back on the ESXI. I also replace SATA cable and voilà ! It starts with the new disk ! I am reparing the raid..It should be fine now. Thanks anyway
  2. Hi there, I have an issue when trying to add a new disk (from rma). As usual, after receiving it, i create vmdk from esxi #vmkfstools -z /vmfs/devices/disks/t10.ATA_____WDC_WD40EFRX2D68N32N0_________________________WD2DWCC7K5NPxxxx /vmfs/vo lumes/SSD_dataStore/RDM/4To_WD2DWCC7K5xxxx.vmd I added an existing hard disk from the vm. When i start,i have nothing (no ssh, no ping, no web access). Event after 20 minutes If I delete the new disk, everything is working fine. Unfortunately, I seems no recording solething on the log. I attach the log here Not sure to help but the new one isn't look the same as these others. New disk: WDC_WD40EFRX2D68N32N0 others disk (2 disks):WDC_WD40EFRX2D68WT0N0 What do you thing? To download the messages.log https://ufile.io/538282
  3. Hi guys, I have my xpenology DSM 5.2-5592 Update 4 running on ESXI 5.x with 3 disks in a LUN (RDM). After some manual reboot (xpenology and esxi), the xpenology does not want to power on. The log en ESXi said: This disk still exist "...T0N0.vmdk": When i check on the Xpenology configuration, the disk 2 seems NOT to be part of the LUN. The disk 3 and 4 are in a LUN. I have deleted it and try to re add but esxi does not recognize the file "4To_WD40EFRX2D68WT0N0.vmdk". Anyway, the disk is deleted and i could boot up in a degraded volume I will check this disk on the bios tomorrow. But what do you think?
  4. Bonjour, J'ai 3 disques durs (1 de 250Go, et 2 de 2To). Très honnêtement je ne m'en rappelle plus^^ mais j'ai du mettre la conf SATA en AHCI je crois. Le RAID du DSM est directement gérer par DSM car mes disques sont reliés en RDM d'un point de vue VMWare. Pareil pour moi, je l'ai ai mis en rdm. Par contre, je n'ai pas encore changé l'adresse mac. Est-ce nécessaire ? Quel serait l'utilité à part utiliser le service Quick connect? Envoyé de mon SM-N910F en utilisant Tapatalk
  5. Bonsoir, Je suppose que vous attaquez les vm seulement via vsphere client ? Pas de possibilité d'avoir un écran+clavier +souris pour chaque vm ? Je n'ai pas encore osé de m'aventurer sur ce terrain car très peu de retour... Envoyé de mon SM-N910F en utilisant Tapatalk
  6. Hey I replaced my I3 4340 to I5-4570T. I have the feature VT-D and I can see devices available to direct patch. One of my friend (vmware expert) said RDM is useless for recent esxi. I Will remove my config according to this advice. Envoyé depuis mon Nexus 7 avec Tapatalk
  7. Damn it, my processor Intel I3 4340 does not support the VT-d !??
  8. Hi, Check again the BIOS, i do not see the VT-d option which is supposed to display right under the Intel Virtualization Technology. Probably the reason on ESXI, the DirectPath is not supported. My BIOS is on the lastest one (F4). Someone can confirm he has the option VT-d ??
  9. Hi / salut, It should work but not tried yet. I have found this guide for gamers. For us that need less performance, it should be fine http://www.pugetsystems.com/labs/articl ... Setup-564/ Passthrough USB https://pubs.vmware.com/vsphere-4-esx-v ... vices.html
  10. Hi, Glad you took same hardware I have configured the RDM with the vmkfstools tool. Xpenology should manage directly the disk. Weirdly, i have checked the advanced settings and see the pass through is not supported too... How can we confirm xpenology have all access to the disk? On Storage tab, I can not test the SMART of my disks :s
  11. Ca marche avec DSM_DS3612xs_4493.pat.
  12. Up. J'ai le même souci lors de l'install de Xpenology, je bloque à 56%. J'ai utilisé NB_x64_5032_DSM_50-4528_Xpenology_nl et DSM_DS3612xs_4528.pat
  13. As you know I want to run esxi and xpenology, Mac OS, Windows as virtual. To have access to the screen of the mac os for sample, I can specify one particular video output like DVI? To want to have access one vm via screen, keyboard and mouse only.
  14. Hey, The GA-H77N-WIFI has two nic, the Atheros AR8161 and Intel I217-V. EXSI does not have these drivers and need to be added with ESXI customizer. I followed: http://www.techygeekshome.co.uk/2014/04 ... ivers.html and https://communities.vmware.com/thread/4 ... 0&tstart=0 The drivers are net-alx-2.0.0.6b.x86_64.vib and net-e1000e-2.3.2.x86_64.vib NB: I added one by one. NB2: ESXI will ask you to update the NIC intel I217-V. To be continued...
  15. Erh after booting on the usb, esxi says it does not recognized the network adapter.. I tried both ports on the MB. Any idea ? Envoyé depuis mon Nexus 7 avec Tapatalk
  16. Erh i wanted to say that the xpenology manage Also the smart. Can i have both ? Correct me if i'm wrong, if we dont do rdm we dont do shr ? Envoyé depuis mon Nexus 7 avec Tapatalk
  17. Hey Thanks for ur answer. My goal is that xpenology manage the raid. So I should skip the rdm part?
  18. I'm building tonight or tomorrow too Can someone tell me if the RDM is necessary to build a SHR raid? I hear it would be better performance
  19. Hi, Should receive my MB this week and will go to install it. I will do a mix of the two guide: [Guide] Up and running with ESXI and XPEenology: viewtopic.php?f=15&t=3564 and [Guide] Installing Synology DSM on Non Synology Hardware - Interactive Guide (ESXI method) http://cyanlabs.net/Thread-Installing-S ... tive-Guide All I want is: * Booting ESXI on USB Stick 16Go * SSD 512Go for storing virtual machines (Xpenology, mac os x) * 3 x WD RED 4To for data-drive I have downloaded ESXI 5.5 update 1 (latest available). Regarding the data-drive, as far as i know is we need to create RDM (Raw Device Mapping) for these 3 WD Red before adding them on Xpenology. May I right ?
  20. Thanks I'll take that one. Happy new year!
  21. OK for nanoboot and I take DSM 5.0-4528 Update 2 for DS3612?
  22. Yes thanks. It should be fine. I will come here if needed [emoji4] So which image should I download?
  23. Seems working nicely. Here is my new nas : Fractal Design NODE 304 Gygabyte GA-H97N-Wifi ocz vertex 4 512go 3 WD red 4TO Seasonic G-450 Half device have been bought in second hand and I have got lucky for some device, the guy wanted to sell quickly [emoji4] Anyway I will follow the guide of one of the guy here to run exsi + virtual machines on ssd + data store on we red. I should start middle of next week. By the way should I downloade latest nanoboot updated and dsm updated avaliable or should I take the main image and then update to the latest one?
  24. Yeah The MB ASRock Q1900-ITX was my first attempt but as I wanted also running esxi with some system (etc + macos x, lightroom) I take a higher one which is I3-4340. It uses 54w.
  25. Thanks for the answer. What about the USB stick?
×
×
  • Create New...