hi,
ich habe das projekt gefunden und wollte es mal testen...
ich habe dazu einen alten lenovo ts server und den stick erstellt.
ich "hänge" aktuell in den Seilen bei der Angabe des Boot-Stick/HDD
Die HDD, wo es drauf soll ist sda
lrwxrwxrwx 1 root root 0 Jan 3 08:04 sda -> ../devices/pci0000:00/0000:00:17.0/ata7/host6/target6:0:0/6:0:0:0/block/sda/
Das Modul A352 ist der SATA HBA lt. Intel.
tc@box:~$ lspci -vt
-[0000:00]-+-00.0 Intel Corporation Device 3ec6
+-01.0-[05]--
+-08.0 Intel Corporation Skylake Gaussian Mixture Model
+-12.0 Intel Corporation Device a379
+-14.0 Intel Corporation Device a36d
+-14.2 Intel Corporation Device a36f
+-15.0 Intel Corporation Device a368
+-15.1 Intel Corporation Device a369
+-16.0 Intel Corporation Device a360
+-16.1 Intel Corporation Device a361
+-16.4 Intel Corporation Device a364
+-17.0 Intel Corporation Device a352
+-1b.0-[06-0b]----00.0-[07-0b]--+-00.0-[08]----00.0 Samsung Electronics Co Ltd Device a808
| +-04.0-[09]----00.0 Samsung Electronics Co Ltd Device a808
| +-08.0-[0a]----00.0 Samsung Electronics Co Ltd Device a808
| \-0c.0-[0b]----00.0 Samsung Electronics Co Ltd Device a808
+-1c.0-[01-02]----00.0-[02]----00.0 Matrox Electronics Systems Ltd. MGA G200e [Pilot] ServerEngines (SEP1)
+-1c.1-[03]--+-00.0 Broadcom Limited NetXtreme BCM5720 Gigabit Ethernet PCIe
| \-00.1 Broadcom Limited NetXtreme BCM5720 Gigabit Ethernet PCIe
+-1c.4-[04]----00.0 LSI Logic / Symbios Logic MegaRAID Tri-Mode SAS3408
+-1d.0-[0c]--
+-1e.0 Intel Corporation Device a328
+-1f.0 Intel Corporation Device a309
+-1f.4 Intel Corporation Device a323
\-1f.5 Intel Corporation Device a324
beim booten (TVS-872 QuTS Hero) bleibe ich aber immer hängen
in der model.conf habe ich folgendes drin..
[System Disk 1]
DEV_BUS = B00:D23:F0
PCI_SWITCH_PORT = 0
PCI_BRIDGE_PORT = 1
DEV_PORT = 6
SLOT_NAME = Disk 1
btw...wie erstellt Ihr alle die "model.conf" ? geht das automatisch? Ich hatte mir eine hier im Forum gesucht und die angepasst...