Hackerjac
-
Posts
40 -
Joined
-
Last visited
Posts posted by Hackerjac
-
-
On 10/15/2020 at 6:12 AM, vasiliy_gr said:
Simple and dirty fix based on written above. Modified /etc.defaults/syslog-ng/patterndb.d/scemd.conf:
filter f_scemd { program(scemd); }; filter f_scemd_sev { level(err..emerg) }; # destination d_scemd { file("/var/log/scemd.log"); }; destination d_scemd { file("/dev/null"); }; log { source(src); filter(f_scemd); filter(f_scemd_sev); destination(d_scemd); };Edit file and reboot. Result - HDD hybernation works fine now...
My config: DS3617xs, DSM 6.2.3-25426-U2, extra.lzma v0.11.2_test.
Thanks for the findings, also working for me
DS3615xs, DSM 6.2.3 Update 2 no extra.lzma, just the one comming within the loader img file
-
Got this one from a friend, its upgraded with a i5-760 anf 8 GB ram
There are 4 blavk SATA plugs and 2 Blue, is it possible to connect HDD to the Blue ones also or do i need to install another sata/sas controller to it ?
Acording to the specs i can find it only supports max 8 TB HDD (4x2TB), any way to get arround that limit without installing new controllers ?
-
Think ill give up on this board, even when shutting down using ssh, terminal or so it still doesn't shut down, just hand there with all fan spinning and gfx turned on, seems like ACPI command isn't perfoming an actual power off (just a halt)
-
That did the turn on trick, unfortenly i still can't turn it off from web interface, think ill see if its possible to find an online user guide, and dig a little in that
-
with 8GB DDR3 laying around and wanted to play with it, so hooked a couple of small SSD to is, booted it with DS3617xs 6.1 Jun's Mod V1.02b (MBR_Genesys), have disabled the RTL8111c lan controller
installed the 3617.pat, every thing seems to be ok, just one small problem, when turning off the sever from the web interface, the server keeps running but it cuts the connection to the lan
Have a feeling its caursed be the ME subsystem on the board, but if i turn off ME subsystem in bios it doesn't load the syno loader
Anyone have an idea about what might be wrong
-
Is it me or are there missing drivers for
Rocket Raid 640L (Marvell 88SE9235)
For DSM 6.1, jun.s loader 1.02b
-
On 25/10/2017 at 5:35 PM, naasking said:
Machine boots fine, but network drops still occur. I have the same AuthenticAMD unknown vendor error:
[ 0.000000] CPU: vendor_id 'AuthenticAMD' unknown, using generic init. CPU: Your system may be unstable.So perhaps it's all related to the spotty AMD support in Jun's current loader. Strange that everything mostly works though, and it's rock solid otherwise.
Its not just related to the spotty AMD support, i have a ASUS AT5NM10T-I (Atom 1.8) also with Realtek 8111E and facing the same problem
-
I have a 6 disk SHR 1 running on Xpenology 5.2 5967 update 2, motherboard, Asrock c2750d4i
i disconnectet it last night, caurse i needed to replace the BNC chip, but in the struggle to replace it i pulled off one of the sata cabels, diden't noticed it before after i had turned it on again, so it warned me that my volume was either crashed or degraded, i then found out of the disk was disconnectet, turned of the server and plugged the sata in again, rebooted, hoping everything would work, well it diden't.
I then went to repair the volume using the disk that i reconnectet, it went on for almost 24 hours, and told me it was done, but my volume is still crashed and i can acces any files on the server
Anyone have some very good ideas about how to save this volume
-
-
Was adding a new single disk in my n36l with DSM 6.0.2, and noticed when i make the Volume, i coud choose between Btrfs or ext4 file system
What is Btrfs ? and pro/cons compared with ext4 ?
-
Hi
I am currently on DSM 5.2-5644 Update 5 running on a HP NL54.
Does anyone have any instrunction how to upgrade to DMS 6?
Is it just the case of writing synoboot.img from the DS3615xs 6.0.2 Jun's Mod V1.01.zip to USB and rebooting, then doing the same as before select install/upgrade, then migration from within Synology Assistant?
many thanks
Maybe you should use 10 min to read this
it should answer your questions
-
I Just tried it on my 2 n36l flashed with n54l bios (so i can have 6 disc connectet), unfortenly i can't get it to boot, have checked pid, vid, serial and mac 4 times, to be sure they are correct, still no luck
I have a n36l too (with only 4 disks) and it work well... you do not have to do anything special other than change vid/pid/serial.
Are you sure you select the right startup option?
The first time you must select grub's entry "DS3615xs 6.02 Baremetal AMD..." or it will not boot.
If you need more time to select correct entry, you can edit grub.cfg (modify set timeout='1' with set timeout='5' for ex)... or you can replace set default='0' with set default='3' to startup with AMD meny entry.
ciao
ema
Thnls alot, got it working now, it also helped when i remembered to copy the AMD bzimage over also
-
I Just tried it on my 2 n36l flashed with n54l bios (so i can have 6 disc connectet), unfortenly i can't get it to boot, have checked pid, vid, serial and mac 4 times, to be sure they are correct, still no luck
-
Problem solved, it was the SMB server on my Dune plasyer that made roblems, after turning it off, everything works as it should
-
net view \\servername does indead work for all my servers, but if i only type net view i get the error 53
ARP is already enabled
-
Been there, done that, have tryed more or less what i have been abel to find on the net (alot suffer from the same), but none have helped me, i can ping the servers, i can net view them, i can make mapped network drive using either ip or name
another thing i have stumpled over is when i just type net view in a commandpromt i get error 53
-
is it possible to "factory reset" Xpenology without loosing the data on my discs ?
-
Soon i'm gonna give up, just updated a win 7 pc that was working, but after upgrade to win 10 i have the same problem
-
Yes, they are both turned on, network it se to private
Xpenology is 5.2 something, latest version from here with latest update
I see all other pc's on the network, just not the 4 nas servers
-
I'm soon going mad or crazy, have 3 Xpenology machines and 1 Buffalo Linkstation here at home, 3 pc running Windows 7, the problem is the 2 tablets and my little desktop pc that is running Windows 10 with latest updates, none of thoose 3 can see any of the na, i can map networkdrive using IP or hostname of the nas, but i can¨t get them to show up under Network, have tried alot of things i have found on the net, but so far nothing have helped1 tablet and desktop are running Home and the other tablet is Pro
Solutions are really welcome before i go insane
-
Is it possible to take my 6 independen hhd in my server and make some kind of virtual drive whit them so my mediaplayer see them as one big drive, and still be abel to use them as 6 disc over network om my pc ?
-
Hello,
i have added this to the end of string:
LABEL xpenology
MENU LABEL XPEnology DSM 5.2-5644
KERNEL /zImage
APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B3J4N01003 vid=0x0781 pid=0x5567 loglevel=0 vga=0x305 rmmod=ata_piix
not working...
@ Hackerjac:
if i disable your recommendation (from your post), my harddisc dosnt appears in bios.
i have set the bios to the default version.
what i can do?
thanks
Its what i have done on both my n36l and its working with 6 drives in each
Are you running bare metal, esxi or what ?
-
http://i151.photobucket.com/albums/s156 ... C00021.jpg
Make sure that the one with red arrow is set to disable in your bios
-
you need to install the hacked bios from here
Upgrading DSM
in DSM 6.x
Posted
I have always updated the USB first and then chosen manual install of PAT file