Ariloum

Yeah but synology hardware is outdated and low perfomance. and overpriced. I'd buy their OS separately if there is option but none yet

I will think if I wanna dive in with all these sr232 stuff (btw if redpill didn't detect lan (or other) drivers that should be fixable somehow without rs232), also I have checked manuals about installing DSM with the proxmox... that process is long. and then I discovered the Unraid. much more friendly all round, logs is there from scratch, no any setup needs and it just works...

Thanks for detailed presentation. Last time I have used serial ports was in early 199x (to connect 2 pc's), did you mean there is no yet stub/wrapper for that redpill's serial interface so it could be reachable via usual tcp/ip and ssh-like consoles and there is no other simpler way to access logs? I do not have COM-ports on my itx motherboard and the only PCI slot it has is busy by the SATA controller. There is exists usb to rs232 adapters but I think it's kinda weird to use these in 2022 and I'm not sure redpill will gonna working well with them...

I tried that manual already, the problem is the loader is stuck/freeze after installation just before synology assistant It just falls into endless "Starting kernel with USB boot" after step 8 looks like it's unresolving issue since there is no even simple log which I can read and check for errors... anyway I switched to Unraid and it works fine for my needs. nonetheless I could do some more tests to help others with similar problem on the hardware like I got (semi-modern Ryzen cpu) if some1 knows what to do and wanna push that issue write in this post:

what is the path to the log file?

I thought the problem is with the network adapter drivers since I tried to apply r8125 instead of r8125B. anyway my progress with the installing DSM is stucked on the "Starting kernel with USB boot" and I can't find other obvious explanation.

Interesting, I just checked - all AMD models of Synology got only 2/4 cores CPU. But my CPU got 6 cores (Ryzen 5 5600G), should I try setup loader for something like RS3621RPxs/RS3617xs with my Ryzen? These systems are 6 cores too, but it's Intel-based on Xeons.

Hello, requesting network adapter Realtek 8125B NIC driver for AMD Ryzen processor DSM builds, I tried to use r8125 and it didn't worked sadly.

> hyperthreading I mean virtualization - misstyped

Hello, I used to try installing with the TCRP loader (tinycore-redpill-uefi.v0.9.2.9) a few different builds/DSM versions, but all of them were stucked on same step: "Starting kernel with USB boot" I tried these platforms: DS3615xs, DS1621+ (2-3 versions of each like 7.1.0-42661) I also tried to disable in the BIOS C1M, hyperthreading and few other options I tried https://finds.synology.com/ - nothing found there is no option in bios to turn on/off sata hot swap there is no option in bios to disable m2 and audio Hardware: motherboard Biostar B550T-silver cpu Ryzen 5 5600G memory 2x8Gb Kingston 3200 (non-ECC) disks: 4x16TB Seagate linux commands: I started with short way ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh serialgen DS1621+ ./rploader.sh build ds1621p-7.1.0-42661 ./rploader.sh backup exitcheck.sh reboot after searching google/reading some forums ended up with this (tried to add Realtek RTL8125B drivers, but there was only RTL8125): ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh ext ds1621p-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json ./rploader.sh serialgen DS1621+ realmac ./rploader.sh build ds1621p-7.1.0-42661 manual ./rploader.sh backup ./rploader.sh backuploader exitcheck.sh reboot Is there any logfile which I could check? Any other suggestions?