javikobcn
-
Posts
16 -
Joined
-
Last visited
Posts posted by javikobcn
-
-
This should work on J5040 processor? i know is a 9th gen but i need this modules...
But i don't know how to add it, im running a dsm 7.1-42661 ds 920+ -
Sorry for the delay, finally i got worked using other usb and writing identify usb, satamap, etc.
Thx for your work!
-
On 5/24/2022 at 2:12 PM, Peter Suh said:
This is the post I already shared above, how to build a new DS920+.
You don't need to worry about mappings related to SataPortMap etc or any Sata port at all.
Just build and use. It is recommended because it is a method that can also skip the M.2 slot.
Try this method.
Hello, I am stuck at the point where I have to add the .pat file to install the dsm from the web. I get an error at 55% with a message that the file is possibly corrupted. I have tried with several .pat files from different sites and downloaded several times but there is no way
-
Buenas, por toquetear más de la cuenta sin tener mucha idea he cambiado varios archivos relacionados con la transcodificacion por hw y ahora no puedo volver atrás. Mi pregunta es si vuelvo a reinstalar el DSM desde cero perderé todos mis archivos del disco duro.
Tengo montado un dsm 7.1 en un asrock j5040 iniciado mediante usb y un hd de 4tb sin ninguna partición para archivos multimedia. Lo que me preocupa es perder todo lo que tengo en el hd de 4tb. -
3 hours ago, LaBoss said:
+1 with this version
-
Ok i'm decided to reinstall the dsm by 0.
I am not able to follow the instructions to try to restore the files as you have indicatedbut i need to know if i will lost all the files of the hard disk or only the dsm files? I only have one hard disk without partitions.
Greetings. -
On 5/20/2022 at 12:14 AM, IG-88 said:
the thing i wrote above would be to install ffmpeg and jellyfin through the dsm package center by adding synocommunity.com as source as you can read here
I have installed the package from synocomunity but now i can't use hw acceleration because i receive this message: "This content is not compatible with this device and cannot be played: It cannot be obtained from the server in a compatible format".
I think the only solution is do the usb installation to restore the damaged installation and pray for not need to reinstall all the dsm... -
On 5/20/2022 at 12:14 AM, IG-88 said:
depends on what you have done, the link you provided is about docker and the ffmpeg update was done with "apt" and that would not work in DSM, only i the docker container
the thing i wrote above would be to install ffmpeg and jellyfin through the dsm package center by adding synocommunity.com as source as you can read here
the original dsm version files can usually extracted from the *.pat file
there is a way to patch /usr/syno/sbin/synoarchive and extract the new 7.x *.pat files
https://xpenology.com/forum/topic/57204-dsm71-beta/?do=findComment&comment=267257
and if that does not work you could still install the dsm version in question to a single empty disk and copy the files you need after install to usb to bring the to your damaged installation
Do you mean an installation of the version of dsm that I use on my nas as if it were an installation from 0 and then once inside the nas copy the necessary filesfrom the usb to my dsm via ssh?
If so, is there a post to use as a guide? -
Hi, i have tried to update ffmpeg with that tutorial but now i can't use hw transcode... There is a method to downgrade or change the version?
And there is a log from jellyfin.
https://pastebin.com/x8YLHVxMI feel like I'm floundering and I can't get it...
-
I got this:
root@NASTY:~# ./patch.sh -p Detected DSM version: 7.1 42661-1 Patch for DSM Version (7.1 42661-1) AVAILABLE! Available binaries to patch/restore: 1) /usr/syno/bin/synocodectool 2) /volume1/@appstore/VideoStation/bin/synocodectool 3) /volume1/@appstore/MediaServer/bin/synocodectool 4) Quit Please choose which binary you want to patch/restore:1 Detected valid synocodectool. Creating backup.. Patching... Patched Creating spoofed activation.conf.. Spoofed activation.conf created successfully root@NASTY:~# cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["hevc_dec","ac3_dec","h264_dec","h264_enc","aac_dec","aac_enc","mpeg4part2_dec","vc1_dec","vc1_enc"],"token":"123456789987654abc"}
I tried 1 but i need to patch the other two directories?
-
Yes, i have installed and configured but i think something is wrong with HW transcodding because i cant play 4k content via web or chromecast. Without transcodding no problem but the cpu runs at +90% obviously and the video keeps stuttering all the time....
Here is some screen captures of my HW transcodding config and the movie info, error, etc.
https://imgur.com/a/UXbwIwMCan you tell me if this 1080 H264 movie the HW transcodding is working?
And what's the best settings for use HW transcodding with my processor? I have tried Intel Quick Sync and VAAPI and I have the same results.
-
Thx for the work but I have such bad luck that my version of dsm(7.1 42661-1) is just the one that is not included, would an update be possible?😂
-
18 hours ago, IG-88 said:
J5040 has a iGPU with the id 0x3184 and thats native supported by synology's i915 driver
together with the firmware files it provides the devices you see in /dev/dri and with these the intel quick sync support is working
the activation.conf is realted to syno's own tools like videostation and even plex needs a licese (plexpass) to use hardware transcoding
one of the few free tools to support intel qsv on synology is jellyfin
about syno's tools and the activation you can read here
https://xpenology.com/forum/topic/24864-transcoding-without-a-valid-serial-number/
https://xpenology.com/forum/topic/49961-synocodectool-patch-for-dsm-70/
Thanky you very much!
I'm gonna try to install jellyfin and read about syno's tools and activation. -
Hi, I investigated a little more and I tried this commands and that's what they said:
root@NASTY:~# cat /usr/syno/etc/codec/activation.conf cat: /usr/syno/etc/codec/activation.conf: No such file or directory root@NASTY:~# cd /dev/dri root@NASTY:/dev/dri# ls card0 renderD128
Why I have /dev/dri folders and card0 and renderD128 but not activation.conf and how I can give it?
When I play a movie in plex i get my cpu at 100% of ussage... -
Hi, i just assembled a nas with that specs: Asrock J5040 2x8gb ddr4 an 4tb hdd on 918+ and DSM 7.1.0-42661
And i want to install the i915 drivers for HW transcoding but im totally noob and im looking for a step by step guide to do that, someone can give me a hand? 😅Sorry for my english.
Error: No data found! after reboot synology
in General Questions
Posted
Hi, today i have rebooted my nas and i have lost all the torrents i'm seeding, i'm using transmission and qbittorrent by docker. This is the error showing of transmission:
"Error: No data found! Ensure your drives are connected or use "Set Location". To re-download, remove the torrent and re-add it."
I have tried to write manually the real location after rename and move the torrents but nothing occurs.
The download folder is /docker/transmission/downloads/complete but i use flexget to rename and move the torrents into a new folders in /volume1/multimedia/movies or tv shows
but there is no problem to continue seeding until the nas reboot.